Відео

With a bit of experience, you can pull great shots this way for sure.

Good point. I have to brew some Aeropress with it. Tbh I forgot I still have this grinder 😛

I noticed some differences in the time of brewing on Orea. Here, the difference not that big. In terms of taste , one bottom is noticeable different here, but remaining 2 not so much.

Thx for watching!

Thx for watching. Still searching for perfect tool but this one is not bad at all.

@@mycoffeeshow111 yep, I've come very close to buying it, but 65 goes a long way towards lots of coffee bits and bats.

@@anarky277 I think you can find it cheaper on special offer. I was always worrying about consistency of my WDT b4, which could affect the results of my tests. With this one, hopefully, at least this problem will be solved.

Hmmm. That is a very good question. Will have to record a video about that. Right now I play with pour overs more than espresso.

You would have to contact them about it. So far they haven’t responded to any of my messages.

Yeah, that’s why I recommended to do it slowly to minimise that.

Hahaha, I don’t know tbh but you might be onto something here 😛

Thx for watching!

Umikot I haven’t tried but I had one from Etsy and wasn’t impressed. Have a look: ua-cam.com/video/aHVdEY9i9xo/v-deo.htmlsi=xYPe7XxehVPCHst8

Thx for your support. I made remarkable recovery. I am sports therapist by trade which helps. I can see this WDT being useful for cafes but if you in rush and spinn it too fast you still might be left with very uneven coffee. bed

Can’t argue with that. It speeds up my workflow though hence I consider keeping it for good.

You are right here but it speeds up my workflow a lot and that is why I like it.

​@mycoffeeshow111 yeah getting basically the same result but in a fraction of the time it takes to do manually is a win in my book

Hi, thank you. I got it during London Coffee Festival but you can order it online and they would ship to UK for reasonable price. Right now I enjoy Nomad Coffee Roasters from Spain, very good for pour overs.

@@mycoffeeshow111 Oh I see, LCF! That's how it must have made its way into the cupping session. Glad you're enjoying Nomad :-) PS: your video editing skills skyrocketed since the early days - keep on the good work, Jack! :-)

@@Pawel-D thank you very much. Nostos has very good coffee now from threemarks. If you have a chance, get a bag. Very nice.

@@mycoffeeshow111 I went to Nostos for a flight set tasting: Daterra, El Alizal, El Placer. Which one are you drinking? :-)

On their website it says that inner diameter is 56.5mm so my guess would be that it should work but it is only a guess. Would it be effective though, I don’t know.

I also have a 57mm portafilter. Once this becomes available in my local market i will buy one lol. If doesn’t fit i’ll just keep it for a future machine upgrade 😅

@@pinoyxbox I ordered one yesterday from Aliexpress. I'll update here if it fits.

@@asafseri-levy4315 looking forward on it

100% agree. It might be the Chinese way of describing products that somehow doesn’t translate well into English but the most important is that their tools are very decent.

Thx. I made remarkable recovery. Even managed to do some squats and deadlifts this morning

Thank you. I am recovering remarkably well. Next week we will have Orea V3 vs V4 but I am already working on Varia review.

Hahaha, I am too innocent to understand that 😛 Thx for watching!

You can find it a bit cheaper now but still around £55 plus tax

Thank you for your kind words!

You can always get their simple WDT that works for all 😁

Thx for sharing your experience. I bought this WDT only to record this video but I like it so much I might keep it. It is not perfect but it speeds up my workflow and that is what counts when you drink so much coffee as myself 😛

@@mycoffeeshow111 good thing there's a sale right now on AE :))

​@@anonylesss AE?

@@anonylesss yeah, I noticed that I overpaid. It is £10 cheaper right now.

@@lowfuel6089 Ali Express

Well, I put my blind shaking video in the description if you want to check but for myself, I prefer this wdt.

I went out and bought a blind shaker after that video and, well, at least for me I can't stand that workflow. Not only did the bed end up being only marginally better than no prep at all, but now I have to brush out the shaker after every shot, too. I went back to wdt after just a few days.

@@lowfuel6089 yeah, blind shaker is not for me either but I respect those who use it.

You are absolutely right. I think I will record my first impressions first and proper comparison later on. I just got it this morning and will be drinking pour overs only this weekend 😁

Thx.

Thx for the info. Do you use RDT alot ? One would expect this grinder to last a bit longer than few months.

​@@mycoffeeshow111 About RDT is something I usually do, not always, but 1 spray is part of my workflow when I grind for espresso. It seems as if the chrome coating comes off on some areas in the first place for no reason, and that's where the rust starts to grow on the steel underneath. That shouldn't happen indeed, even the manual itself says you can use RDT as long as you do it in an external container before adding the beans to the grinder. It is probably a good grinder with cheap bearings, and it's sad because I was very happy with how it was working..

@@Mastrenich well, they had to cut their costs somewhere but that is still disappointing.

Thx again for the info. I will keep an eye on this.

Thx for watching. You are right, this is a very fast basket so you would grind much finer. Just remember that HE baskets can easily overextract so 23-25sec might be enough while I would go for longer with regular basket

Thx for watching!

Thx for watching. In fact next week I should have my V4 vs V3 video ready but to answer your question, wide Orea V4 should work nicely for you and you can play with different attachments according to what you brew.

Thank you very much for helping me! I will order the Orea V4 Wide as a Father’s Day gift to myself 😉

I think I will compare it with either VST or Pullman and maybe talk about differences between DEX and BEP baskets. One thing you can’t deny MHW is their value for money.

Congratulations! You will love it.

Hi, tbh I haven’t noticed that big variations on my DF83V but even with Max2 not every shot is precisely the same. Do you weigh coffee after each grinding? Sometimes retention can be an issue. It that case try rdt, sometimes it helps. Another thing would be an inconsistent puck prep. What espresso machine do you use? Have you tried it with different grinders?

@@mycoffeeshow111 Thanks for the reply Jack. I'm using a Lelit Bianca. RDT and WDT. Retention is low because I weigh pre and post grind. I'm going go collect more data and see how it goes.

@@tarekz9992 Please keep me updated. Sometimes more seasoning of burrs can solve some issues. If possible try different grinder with your machine and see how it behaves.

@@mycoffeeshow111 will do! I ordered 2kg of cheap espresso from Amazon and plan on using it strictly to season the burrs over the course of 3 days. Once seasoned, I'll collect data from 20 shots using a different coffee. I'll reply back with the results (or if there a better way to share the data lmk).

Hi, Impeta would be the best for you, followed by Konkava. Impeta gives you the sharpest notes while Konkava tends to hit you with both fruity and deeper flavours.

@@mycoffeeshow111 Hi, thanks for quick response and good advice. One more question please. As Eureka Mignon Specialita and Ascaso Dream PID user a few days ago I bought and got Mazzer Philos and I am using two baskets: VST 18gram and IMS Superfine. Will I feel real taste difference when I buy Impeta and Konkava?

@@milos.sladecka Wow! How do you like your Mazzer? To answer your question, the difference should be noticeable. Will you like it, I don’t know. If you want something even better, Wafo Soe/Spirit is overall my favourite filler basket.

@@mycoffeeshow111 Thanks. I like my new Mazzer soooo much, it has everything I wanted from single dose grinder - workflow, taste (less bitterness than Eureka), retention...I clensed my Eureka every third weeek (2-3 espressos daily) and there was allways coffee inside (and I have blower and tilt base from Etsy), I had to do burr alignment .... And now Philos - I ran 2 kg of cheap coffee through it (burrs seasoning - and yes I know that Mazzer says that burrs are already seasoned) and when I opened the grinder, there was almost no coffee inside, it was so clean. It has a little bit vibration, but not too much. Again - I am sooo happy that I pulled the trigger and bought it, it will be my final grinder. And concerning baskets: have you ever tried IMS big bang baskets? This review claims they are very close to Wafo and yet are relatively cheap. medium.com/nerd-for-tech/ims-big-bang-espresso-filter-basket-fe06ab503f01

69 is definitely one of my favourite numbers, the rest is just for convenience 😛

I prefer this one as it clogges less but very likely I don’t use April to it’s full potential.

I would but sometimes I do miss more traditional approach to espresso, especially since I sold my La Pavoni. Btw, I heard there will be new “smart “ espresso machine coming, maybe this year.

Hi, thx. I have seen it as well. I am a bit reluctant to buy another hand grinder as the videos about them are so tiresome to make but maybe I should. Anyway, my review if their new WDT tool should be ready later on this week.

@@mycoffeeshow111 ah, that's understandable, and I always feel pain for you when you have to dump espresso to avoid having a caffeine overdose!

This one sits much better than Pesado and it has rounded edges so hopefully it won’t damage anything.

Fast, tricky to dial in, easy to over extract but otherwise not bad. I just started with it so can’t say for sure.

It is golden so it must be good 😛 This one is tricky to dial in, runs very fast.

Hi, I got a new water distribution plate some time ago ( ua-cam.com/video/nviWuPrVOX0/v-deo.htmlsi=jp8L_BNa8ryNUZJS ) but wasn’t aware of any new shower screen.

Obviously it depends on coffee and how you pull a shot but on average, this should work nicely for you. Please let me know how you like it.

Wafo is still my nr 1 choice. But this one is golden so it must be good 😛 I only pulled few shots with it, trying to get good looking extraction for the video, rather than concentrating on taste itself.

Thx for watching. MP should work nicely for you with DF83. So are you planning to modify your existing machine or buy something else?

@@mycoffeeshow111 Thanks so much for your input! I feel that I don't have the skills to modify the GCP and I'm not sure I want to put in the time and effort and be left with a dead machine... I'm at the moment between the Decent or go for something in between till I'm sure; something like the BDB or the Argos, purely based on their thermal stability claims. This is the debate, do I save for a new machine and just keep with my current setup or just go for the burrs and wait even longer for a new machine 🤔

@@gero77 there is also Kafmasino One which seems interesting. I also heard that Espresso Outlet will be introducing some smart espresso machine in the future but they don’t want to share any details yet.

@@mycoffeeshow111 Ohhhhh that's interesting news! Can't wait! I'll check the Kafmasino One as well! Thank you so much! I truly appreciate your help!

Thx for the info!

Thx for watching. What is wrong with that 3m? They are easy to apply and relatively easy to detach. Sometimes I do refractometer readings after testing and I don’t want to throw the coffee away.

@@mycoffeeshow111 I don't know if you're familiar with masking tape, but it peels off very easy. From a viewer's point of view when ever you do the reveal we squint to see the number, but we first see the 3M and often don't even make out the written number, it's like one of those surfaces that are difficult to write on, it's barely visible. I enjoy everything else! it's just this little thing that could be improved.

@@anarky277 I see. I can try. There is another reason I make those numbers barely visible. I mentioned it when I first started. When I drink coffee in front of the camera, I can see myself on screen and I don’t want to be able to see what is written underneath the cup. I will have to think how to solve this issue.