Відео

Only one thing. Is it easy to use. I currently use MOI, which is DEAD simple but very limited. Im willing to try something else, but when I tried Blender my head exploded, mainly because nothing was obvious.

Not even close to fusion, from first 10 minutes, im barely made damn square box😂😂😂 total BS software

Just a Question, could I use Bambu Lab's pla aero filament on this instead of pla lightweight

Several years back I used to convert a quad mesh to a t-spline and then convert the t-spline into a solid. Isn't that still possible? This was done completely within Fusion 360.

It looked like your plane had poor roll stability. Maybe trimming or a higher dihedral angle could help?

Without vertex moving its not interesting. For peace of soup its ok😂😂😂

You need to make the initial structure and then make the opening separately and then join the two together after. Each need to be their own component and put together like an assembly.. 90% of the time in the real world you wont find the engine shroud made in one piece.. But this is an excellent way to by pass a situation where you just need to make it one piece for a model..

Thank you, not building planes anymore, but for boathulls this is very valuable info

This is awesome. Well done and thank you for putting up tutorials. I've been looking to make my own RC tires. What kind of rubber did you use? I have made my own tires by cutting existing tires and gluing them together to make the size I needed. If you still need tires for your Porsche, let me know the width, OD and ID and I can probably recommend a donor tire to be modified :)

Thanks for the video! Quick question. Would this create a file in fusion360 that can be edited in forms mode so you can edit the curves rather than only push pull segments? Thanks!

I've been trying for a few weeks now to find someone who has made wooden works in plasticity3d such as a cabinet wood , do you have the option of making one for example. 🙏 I'm trying to figure out if it's suitable for woodworking or it's better to use Fusion 360 or Sketchup

Ive tried to learn Fusion and Onshape. Thwure great programs but thw complexity of doing even basic actions just doesnt stick or feel intuitive. After a basic plasticity walk through of 20 min, I recreated a part originally designed in 3d builder in 1/4 the time. Plasricity just works better in terms of intutive design AND acrually running on your system. It launches fast and runs at locked 160 fps on my pc.

The detail wow. How big of a part can you make ? I'm afraid to look more into after hearing rabbit hole

is there a way to export the curves you created in Fusion to Plasticity and then model in Plasticity using those Nurbs curves? I tried doing this and Fusion would not let me export the created curves as STEP files. I have an excellent model I want to use but cannot import as an empty into Plasticity and this is my workaround.

It did not work for me. export to iges got nothing. removed blender re-installed same results

Thank you so much! I was just about ready to give up on importing RC Jet mesh on a F4 and overwhelmed at the thought of building the model from start to finish (I’m a new user on Fusion). I’m super excited to spend my Friday night practicing this tutorial. FANTASTIC!

What prop pps

8:23 i cant subdivide face, i clicked alt s noting happen.. help!

i was having missing walls on printing plane parts. i finally fixed by setting the horizontal hole expansion to 0.

Hello sir ,im just wondering why didnt the styrofoam work and did you use steam to expand it? Thanks

Thanks, this was so helpful - I couldn't figure out what was going wrong when I tried to thicken my geometric shapes. Now I understand I'm asking the software to do the impossible...

Where has your channel been all my life

What kind of plastic did you use?

Haven't seen any updates on this project for a while, has it been shelved or is it still in the works? Looks really promising by the way. I hope to see some flight footage some day 🥺

did it work?

can you do texture in plasticity. like you can in blender?

How do you loft using rails that are sometimes smooth and sometimes have a hard corner to them?

There is a basic rule in real life: The minimum internal radius of a sheet cannot be less than the thickness of that sheet. If the sheet is 3 mm, the external radius will always be at least 3+3=6. In reality, this is limited by the sheet metal forming tools and must be taken into account. In modeling, we can have more tolerance and we can make small external radii as long as the internal radius does not reach less than zero, because that is where we will have problems. There are programs that solve this problem by converting values ​​less than 0 into edges or with a very small radius of, for example, 0.1 mm. In fact, I thought that Plasticity did it by converting conflicting internal radii into 0, that is, edges, but it is true that there can be a conflict with the continuity of the adjacent radii or joints. If you keep in mind not to reach internal radii of 0 mm, everything will be fine.

is xnurbs feature just for subcription model ?

Please go ahead with the how to build!

Do you have the files or a link I want to make this too!

That certainly looks a very nice designed nose cone cowling. I run another Parasolid program. I had a L shaped surface with a 2mm radius corner, then I offset the surface 3mm and it ignored that it couldn't make a -1mm ( or negative ) inside rad, producing a solid body with an internal sharp corner - doesn't Plasticity or Fusion do that?

Great tut. Fast and simple.

What motor

What electronic so you use

Great video! I struggle with plasticity a little. I spent years trying to learn solidworks, but can't use it anymore for what I want to do. I was a master sheet metal layout mechanic. I wish these programs would work a little more like layout, cause that's how my mind thinks.

I just discovered Plasticity on Monday. Fiddled with it for 5mins. Made stuff in 5mins I couldn’t in C4D, Fusion360, or Blender for 5 years. I hope Adobe doesn’t buy to kill it. That’s my only concern.

Have you tried any other brands of coverings or only UltaKote?

I've been searching for this kind of tutorial for weeks. Finally, I found it! Thanks, bro-I really appreciate it. Keep it up!

I recently purchased a BambuLab A1 printer with a view to printing RC planes. I've been an RC pilot and enthusiast for around 15 years and have built many foamies' and balsa models but I'm now looking into the future which I believe will be 3D printing but I'm a total newbie so a steep learning curve ahead.. So, I'm now curious as to whether the practices and settings you've demonstrated in this video will also work with the A1 if I use the orca slicer as well since both the printer you're using and the A1 are both Bambu Lab printers?

you can teach me without blueprint .

Will there ever be another free download period?

My goat right here

finding it really hard to unlearn fusion 360 to use Plasticity fluidly.

with 1120kv 1300mah at the most, is that a 9" glow prop?

3 or 4s 1500mah

Stl file?

What motor you got?

850, 3s

3s maybe?