Відео

Bring the channel back brother!

Great video! Angles and set was awesome

Honda navi stock factory tires are super dangerous on wet roads and gravel. on wet pavement these tires do not have any grip what so ever. Goin to replace my tires soon

Can you get a 12 on the back as well?

Great vid! But you had your park brake on during the revs:) whoops

So it's been 2 years, thoughts regarding the tires?

How much PPF did you need, and did you make a video of applying the PPF?

How do you get the spark plug loose?

What is that rear shock off of?

You cannot remove the wheel that way with the stock exhaust

Thanks I’m ordering tires Wednesday.

Thanks for posting your video. I am having the very same issue on my 2013 Honda TRX 250X quad. Welch plug in the way of the mixing screw on Keihin carb. This might be a stupid question but I was curious why you recommended left fluted drill bits and used the drill in reverse? Aren't the Welch plugs pressed in? I started drilling my Welch plug out and it started spinning in the bore. Dremel tool to the rescue.....

you make it look so easy even i feel confident I can do this. thank you!

Hope your good bro, was wondering What’s the exact model? And the other part that I need? Saludos desde México 🇲🇽

Thanks for this video. Do you think the windshield blocks any wind ?

This is just a handlebar alignment issue that's easily fixed following any of the videos here on youtube. I just did it myself. You guys are the reason Navi riders are getting a bad name.

How do youbattach windscreen to frame using the rubber spacer with nut inside? Mine was not assembled upon delivery

What size D tool did you use for the air fuel screw?😅

Great video! I tried to mix the air and gasoline in the 2023 Honda NAVI, but the carburetor has a plug on the air valve that I cannot change because it is closed.

Doing my back tire change today

Gracias Amigo tu si sabes. Justo lo que buscaba

What kind of tuning did you have to do for it?

Thank you for the excellent video. Could you provide more details about the new top speed achieved with this setup?

This is how the bars are made. Nothing is wrong with them.

And I just noticed you have the heavier spring than mine…yours is 100nm and mine is 80nm

How’s it ride? I put the HO424 on mine from a Grom and with everything soft it’s a rough ride…I’m 162lbs…🤷‍♂️

which shock absorber u have installed?? and can u provide website name

Stihl RM448 TX, manual says 2800 rpm, Runleader says 5500 rpm. How come?

What size D sockets for the air/fuel screw

So good and super 👍👍👍

Dude is the most slowest boringest video I've ever seen Nobody cares what kind of screwdriver you got to where you bought it from why can't you just say four turns out two turns in why you got to go through all that stuff and it's

Mine looked exactly the same. Changed it at 500 miles.

mine dont have the circle heat connector mine came with a flat piece of copper

This video has been a major source of reference for me so thank you and plz don’t take this the wrong way but I refuse to believe you got that torque wrench to click at 68 foot pounds holding that variator with your hand 😂😂 the vid don’t even show it. All jokes but seriously thanks for this information.

Thank you.

Will this pick up gravel on dirt roads?

I know what I’m gonna do with mine , I’m gonna leave it alone and not worry about it

thanks man the kits for some reason had a bunch of washers and was confused until i seen this

Que tal amigo te saludo desde Guatemala tenia un problema con la misma gracias a tu video solucionado completo podrías subir como calibrar las válvulas porfavor para poder aprender disculpa

How’s the ride? I put one on mine and just sitting on it with compression and rebound set to soft it seems very hard…🤷‍♂️

scheduled breakin is after 300 mi according to the shop manual, might be worth flushing in a couple times if there's that much debris, when I change my oil if I find any debris at all I'm just going to refill it two or three times after riding around for about 20 minutes per until I can no longer see anything on the strainer.

All of it

Mine runs smooth so if it ain’t broke don’t fix it

very big roach at 9:21

thank you for your videos, there is very little information on the navi, in terms of upgrading and performance tutorials, and results. I have ordered the rev limiter delete kit from rolling wrench, the DCR upgraded camshaft, variator/clutch/rollers, any adapter so I can use a 24 mm carb. hopefully I can get the navi to go fast enough to go out on the highway with. great channel, I'm on day three of Navi ownership and i love it!!

I agree I think that chopping plastic to try and get to the bolt means they never read the shop manual that's available... anyone that chops through any plastic to get to a bolt on any production vehicle is a certifiable idiot.

Dang mine did not include any paperwork or instructions and I completely skipped the internal bar mounting. I just ran the spacers and bolts into the existing headlight housing.

what is the screwdriver actually for ?

Same here great timing

What's the tyre size