Відео

Thankyou so so sooo much I’ve took days trying to do this and found your video and did it instantly Thankyou so much

😊👍dad

Just seen this. I used a trampoline hook and after stretching the belt was able to pull it onto the pulley.

Nice! Your old spring video is hysterical btw 😂

That's the exact same one I have and haven't used it yet

Wow so cool

Absolute waste of time

I know this video was posted 8 years ago but this is the only thing I’ve found where you have the tire pressure and ABS lights on, did you ever manage to fix this or found out what the problem was?

😂😂😂😂

Thanks

Nice job! What I love about these old scopes is that for the most part (outside of the CRT) most parts are readily available. So you can keep this rig going for years to come. Also the charm of analog switches and immediate feedback with no latency digital scopes have.

Excellent video thank you. Im working on the same model of scope but my fault is that varying the intensity is affecting the trace vertical positions, as the intensity increases the trace spacing drops to the point it starts pulsing the vertical. I feel sure its in the same area but I havent found it yet but your video has helped me get my head around this area of the scope cheers

Take the bearing off the back and pull the back panel away slightly so you can drop the drum 25mm then the belt will fly on and then just put the drum shaft back through its hoke and put it all back together,,

Finally 501 subs by me

My friend stretched my scooter spring for the bell and I have no way to fix it

Huge help, many many thanks 🤩

Try putting it in cold warm afterwards

You are a lifesaver, I struggled for ages till I found your video, brilliant. Thanks so much

I have problem eith my Hameg 203-6! Any idea how to fix issuse? ua-cam.com/video/dBxXbUESxUQ/v-deo.html

Cracking advice i’d been wrestling with it for an hour!! 😂

Honestly just used this technique and it worked perfectly!! Half a hour and the missus walks in with this video 😂👌

مقاس السير كام موديل IDC85S

Love it

I'm pretty sure the original post was discussing the most common spring high carbon steel aka spring steel. There's rare occasions when they are made from nickle, copper, or stainless steel so what various alloys are you talking about?. Anyways, you need to heat the spring and make literally some effort to reshape the spring, quench it, check the shape is correct for function, and temper the spring. It must be formed hot or it will.... Spring back like springs do.

Brilliant, thank you. Thought I was going mad until I watched this!

Thanks for the vid. No way was I going to get my belt over that pulley with a screwdriver, so I used a plastic coated hook, which held onto the belt much better. I also had a problem getting the impeller type fan off which I also came up with an answer for. ua-cam.com/video/qFBQy4pxNs8/v-deo.html

I watched the video upto the diagnosis segment, and then stopped. Having repaired a couple of these, I'm pretty certain the fault will be in the cord, and not the rotating connector.

Match the suit to the surroundings.

So glad I came across this video, replacement belt comes tomorrow so I’ll give it a go

Thanks, must have watched the same vid and had the same problem. Cheers.

Thank you very much, it was impossible for me to put the belt in place until I saw your video! With a screwdriver I finally could put in place with your method, thank you very much!

Thanks. I was literally 3 minutes away from kicking fudge out of the machine

They said sus 6 years ago💀

Cheers for the video saved me from further frustration 😅

Coincidentally... I've a Hameg HM203-5 that I stored in the shed for a few years and the trace stopped working not long after powering it up for the 1st time. The circuit + opto-isolator are almost identical to the model you cover in the video. It was also hot to the touch. The chip actually measured OK in a universal tester, but the capacitance of the diode was zero, which looked iffy. Replaced and all working again! Cheers.

Massive help thank you. I was really struggling to get the band over but after watching this I managed it with my screwdriver and without breaking a nail so big bonus 👍👍👍

Grab the belt from behind the pulley, grab the belt from the side of the drum and pull down, then slip the belt over the pulley, no need for a screwdriver.

Vero, nei vari video si vede montare la cinghia sul tendicinghia in un modo che sfrega sulla parte in plastica che copre il condensatore e di conseguenza alla lunga si rompe, infatti la mia è sporca di nero in quel punto, perciò anch'io avevo pensato di montarla come hai fatto tu e lo farò appena arriva la cinghia nuova.

Is there a circlip on the pulley shaft?

Dude, just turn the motor that's how it's done 😅😅 It should be on a spring for tension

I removed one of the pulley bolts so pulley bracket could move then was easy

Legend!

You have no idea what your doing. If a spring his hyper tensioned beyond its tempered limit, it aint the hell going to go back to its original shape. It has to be heated evenly at a narrow temperature range and then manipulated back into shape and then a controlled re heating annealing process to make it serviceable . A torch like yours is not suitable for this task, the it has too high a temp range withing the confines of the tiny flame. Go back to reading Harry Potter there's no magic here.

You sir a hero. I've been breaking my fingers for the past hour

You sure… are a legend. Thank you so much for this video

This video just saved my sanity. Thanks!

Brilliant. Been struggling hours with this until watching. 2 minutes and the job was done. Thank you

GODSEND. I was just online looking for a new belt cuz I thought mine was too small. If the pulley and motor wasn’t tight I would have had them off tryna get the belt on. Will defo try the screwdriver method😩😩🤌🏽

Thanks for this Chris! Exactly the same experience as all the other commenters. Even after stretching, belt seemed 3 or 4 inches short of getting anywhere near the pulley but at least this gave me the confidence that it was the right belt and it would stretch with perseverance. Was hard work though! The Espares video is great apart from this bit and also dropping it round the front of the drum. Guy did it easily on his machine. I had to practically dismantle the front to get a gap to get the belt round. Thanks for posting this!

Hi Chris. Is service manual for HM203-7 available