Відео

i love those seats... what are they out of?

Any idea if these will fit a 5.4l Expedition 4wd?

What’s the name of the tool use at 28:20 please 🙏

What type of wood did you used

Hey if I want to put a sub woofer in the back what all do I have to do anything else I have to do ?

How tall is it from the floor to the top of the storage compartment?

Im having an issue. My power windows, gauges, etc stay on when battery is on. Is there a key on switch or wire that im overlooking. Ignition is correct. Starter works. Just confused why everything stays powered up. Thanks.

You don't have a clue dude...

Man I have to do this to mine

Your wheels are badass! Whisky color works!

How wide is it?

Where did you find those cup holders?

Wow, good job🏴󠁧󠁢󠁥󠁮󠁧󠁿

The best way to apply fabrics with contact adhesive is to place the fabric on top of where its to be installed, being sure to allow around 10-15% extra around all edges then to apply the glue simply fold the material in half with it remaining in it's install location, revealing half the surface to be be glued as well as half the material to be glued. If you're worried of any overspray getting on the face, newspaper works well to quickly mask spots off. Now once the glue has tacked, just need to flip the folded fabric back over into the glue, rubbing it out along the way, removing any wrinkles to the edges. Then fold the other half back, and apply the glue again. Once the entire surface is glued and fabric is in place, you can flip the board face down, spray the edges, and once ready using the extra material that was allowed to run past the edges you can stretch the fabric around the edges, and once everything is good use a razor to trim the excess off .

I’m working on a 1980 Cheyenne right now ua-cam.com/video/AnONb_3Z_Q4/v-deo.htmlsi=38nww5AaVv92Bccu

Dang that thing looks nice

Woah never thought this could be done! I’m about to have to c notch my Squarebody! Thanks for the idea! Here’s my truck : ua-cam.com/video/AnONb_3Z_Q4/v-deo.htmlsi=38nww5AaVv92Bccu

You made it so easy to install the carpet. I tried to do mine and gave up. I could use those factory seats 😂

Awesome build!

Sick video bro planning on doing mine this summer super helpful video

Im about to do this. Thanks for the video. SUBED

Great video till the music started. That's when you lost me.

gauge cluster does look cool, I wish they made them for s10. nice work with your truck. this helps me out alot I want to rewire my s10 due to the age and also the factory bulkhead connector is pretty much trashed. It seems most of the universal wiring kits for gm columns have the old school dimmer switch and wiper switch. I need to have mine all work through the column did you notice if that harness could do that?

I'd say stop overthinking and doubting yourself. You got the skills

awesome job mate looks great

This is really nice!!🎉🎉🎉💯💯💯

What brake power unit did you use?

on the over heating check the timing. My 64 with an 289 ran hot I add advance to the timing all is good now

Single stage metallic is tough. You can’t do a drop coat to blend the metallics cuz it flows out dry to far away.

What part number do you use for engine mounts? What mounts are the ones you have bolted to block? Thanks in advance

my 98 F150 4x4 was a max tow 5.4 package so it already had the 8 rib belt so I was lucky in that regard

People wanting to do this swap, who have NA 97-03 F150s, can just replace their fuel pump with a single Walbro 340L pump and run 97/98 fuel rails and put an accufab fuel pressure regulator on the 97/98 rails. That was my setup for 10 years when I have the Eaton, now that I have a Whipple 2.9 I run a single DW415 pump, same rails, same FP regulator and SD60 injectors.

Seems like you sit too low. No?

What type of material did you use for the upholstery?

You guys Killed it on the front windshield. I think running the wires through the fender took up a lot of your wires. The OE wiring runs along the fender on the DS. But your routing looks better and once you cover it with wire loom who's goanna know or care.

Great Video.

Well, Guessing you don't Live in NY, we need our Emergency Brake to work for INSPECTIONS, My E Brake (OEM) on my Lightning, is 23 yrs old, still functions, Been there, "They Said," Well, It's not right. your right, bleeder at the top, Air is lighter than Fluid. Good Video.

@08:03 so what is the best fuel pump to have, the dual or single ?

Timing is off

Hey brotha looks like an absolute blast. I hate to be off topic but i couldnt find your email. Im building my HD 150 and was wondering if you know what brand those grills are on your L? I hate my billet bars and all the mesh ones i find, have a surround and sit behind the frame . Yours sits out flush and has no frame and is honestly exactly what i want. Thanks in advance .

Hopefully you didn't wipe out your cam and lifters not running the breakin procedure immediately.

Where’d you get the leather

Iv got a 1960 ranchero since I was 14. Now I'm up grading the front end to a 1975 mustang 2 front end and a 1979 302.

What shocks are those.. 4/6 drop?

I need one like that..Nice

What’s the part # for the fittings used for the transmission cooler? 16:22

got a lightning myself and these videos are what I need for motivation🙌🏽 keep them coming brother

looks good just wondering what type of screws did you use?

Hi I salute you from San Diego California, Thank you✌🏻 for your video help me pick the right brake rotors for mi truck.because wilwood and bremboo is so expensive $2500. To $3500.00 just for the front ones. 😢 I own a 2002 F150 harley davidson. And making close to 500hp. And need. To stop better. Now you have a new subscriber. Good luck with your lighting..

Gotta say u did a fantastic job for your first time . I'm laughing at you saying its heavy mine I'm building one now that's 3\4" almost a whole sheet with 6 speakers and a sub and 40000 watt amp and breakers wires fuse books it takes two guys to even move it still great job bro love the truck I would love to have 1 some day