Man hurry up and finish, I can't wait to see the finish product. I'm gathering up knowledge before I start mine. I have a bench seat so it won't be so complex.
Super awesome console! I need to make one for the c10 project on our channel! I really like the cup holder integrated in the console! We just stated a UA-cam Channel were building a C10 also! Keep it up looks great!
watching your last few video's on this c10 and love the work going in to it. made me start to work on my 83 c10, it was almost finished two years ago and i feel its time to finish and drive it for once
Thanks man I really appreciate it. I completely understand but sometimes it’s not a bad thing to step back for a little bit and assess the situation and then get back after it. Good luck buddy!!
Not too hard, you don’t have to be super elaborate. If you have a bench seat it can be as simple as a small box with two cup holders. There are some companies that make them but are really $$$. If you plan on doing it yourself the best thing to do is make lots of sketch’s and cardboard templates to make sure it’s perfect. I use 3/4 mdf board for the majority and 1”x6” wood boards for any structure as they are stronger.
@@kesselsgarage I'm planning on building an figure out how to put a decent system into it. But I'll have to figure that how eventually... Thinking 10s or 12s
Thanks! Which part is too wide? By the seats or the pedals or the whole thing. I think everything fit ok during the test fit but we will check before we finish wrapping it.
Here’s the final part of the finished console!!
ua-cam.com/video/OxCfeVex9DU/v-deo.html
Man hurry up and finish, I can't wait to see the finish product. I'm gathering up knowledge before I start mine. I have a bench seat so it won't be so complex.
Thanks man, it’s a slow process everyday after work but we are getting there. Good luck on your console.
Here’s the finished product!
ua-cam.com/video/OxCfeVex9DU/v-deo.html
Great job my man looking really nice cant wait to see the finished product 👌
Great job!
Super awesome console! I need to make one for the c10 project on our channel! I really like the cup holder integrated in the console! We just stated a UA-cam Channel were building a C10 also! Keep it up looks great!
Thanks buddy!! I really appreciate it. I definitely like the looks of yours and the way your projects going! Glade to see you’re out testing it
Nice job. Looks neat / clean so far.
Thanks!!!
This is really nice!!🎉🎉🎉💯💯💯
watching your last few video's on this c10 and love the work going in to it. made me start to work on my 83 c10, it was almost finished two years ago and i feel its time to finish and drive it for once
Thanks man I really appreciate it. I completely understand but sometimes it’s not a bad thing to step back for a little bit and assess the situation and then get back after it. Good luck buddy!!
This makes me miss my 82 c10
Very Nice job I LIKE
Thanks!!
Good job bro 👍🏻
Appreciate it buddy!!!
Nice 🔥🔥🔥🔥🔥🔥💯
Nice 👍🏽👍🏽👍🏽💪🏾❤️
Where did you find those cup holders?
What type of wood did you used
It looks great man , What car are the seats out of?
Thanks man, they are actually new Cipher bucket seats
Hey if I want to put a sub woofer in the back what all do I have to do anything else I have to do ?
Looks great so far! What router bit did you use for the speaker holes?
Thanks!! I used a 1/2 radius bit.
@@kesselsgarage beauty thanks!
looks good just wondering what type of screws did you use?
Just regular 1-1/2 wood screws
Looks fantastic just one question if i may i ask
What kind of wood did you use???
It’s 3/4” MDF board. You can pick up from any hardware store
If you don't mind saying, I was wondering where you got the seats, I really like them.
No problem. They are cipher bucket seats
What’s the name of the tool use at 28:20 please 🙏
I just got a 90 Chevy Silverado single cab. How difficult will it be to add a custom center console???
Not too hard, you don’t have to be super elaborate. If you have a bench seat it can be as simple as a small box with two cup holders. There are some companies that make them but are really $$$. If you plan on doing it yourself the best thing to do is make lots of sketch’s and cardboard templates to make sure it’s perfect. I use 3/4 mdf board for the majority and 1”x6” wood boards for any structure as they are stronger.
@@kesselsgarage I'm planning on building an figure out how to put a decent system into it. But I'll have to figure that how eventually... Thinking 10s or 12s
I am assuming the floor heat will still be effective with the console in place? I have a 85 gmc c15 so this looks nice so far.
Where did you get the stainless steel cup holder
I ordered them from bass pro they are actually boat cup holders.
www.basspro.com/shop/en/tigress-stainless-steel-cup-insert
Hey wat router bit was tht u use for tha curves
1/2 radius bit
how thick is that MDF?
3/4”
28:27 can any one tell me what that tool is called that smoothes the edges like this?
It’s a hand router with a 1/2” radius bit
Good Work however i think yor going to find its a little to wide
Thanks! Which part is too wide? By the seats or the pedals or the whole thing. I think everything fit ok during the test fit but we will check before we finish wrapping it.
Mock up with cardboard