Відео

hi i just got this printer and the bed keeps coming unlevel and the nozzle keeps scraping the prints even if i raise the axis

The M600 code isn't working properly. I've tried modifying the code in the cfg file. But! When I input the new code provided from what other videos are saying or whether I leave the original M600 code in the cfg, when I do a color change, the filament retracts out. I change out filament. Than when I resume print, the head just stays in one place and continues spitting out filament without continuing the print. Any word on how to fix this? If you can contact me directly I can send you videos, the gcode, the cfg, etc.... I can't find why it's doing what it's doing within the code.

I bought a couple of these thinking they would have fixed the issues by now. Nope...trying to return them now...Going to buy a Bambu Lab

My first 3d printer purchase was a Sovol SV06. The damn thing was a damn nightmare. For over a year i fought Sovols horrible design flaws. Almost drove me out of the hobby completely. During the time i noticed one thing remained the same.. every said Bambus just work. Press a button and walk away, simple as that. I told myself, Bambu or nothing. I eventually purchased an A1 w/ AMS Combo. Im so freaking amazed with this thing. Absolutely in love. I cant believe all the features. The bump stop cleaning mechanisms, the filament cutter, the silicone brush in the back, the auto leveling THAT ACTUALLY WORKS!!

Getting one on Black Friday with the K1C printer to go together!

Instead of using that extra-expensive support filament, did you try using PETG as support for PLA prints and vice-versa? Works like a charm and is extremely cheap, too.

THANK YOU David!! Just bought one of these Neptune 4 Max printers for my son, and your advice will save us both a lot of frustration and heartache!!!

I bought the Neptune 4 and for whatever reason if I use supports at like 5 inches the print always fails but if I don’t use supports I goes through just fine any help would be great. Thanks

I can’t get this thing to work . I got the software going. It’s connected. I’m sending files. They start to print and nothing just a dripping from the plate . The plate dips into resin, then pulls out of tub then starts to make mechanical noises going up and down with it just dripping into tub. Machine just doesn’t work right if anyone can help me out here please help.

I was wondering if i should buy the Ender V3 Plus or the K1 Max ? Right now the K1 Max goes for 670 EUR and the V3 Plus for 400 EUR.

I have been looking for an answer to this question but i couldn't find it, how fast can you print without the auxiliary fans running ehile maintaining safe and high quality printing

Do you know if i can setup a camera at a different location as long as it gets internett?

I will receive my neptune 4 plus in a few days, what steps should I take to configure it correctly?

Learned some now things thanks, i had 3 n4max. Just bought 5 more + 1 neptune plus.

Both printers need to figure out how to run tpu through ams and ace those don't like flexi filaments

2:05 "If you're in the market for a reliable keyboard with great features, the MX Keys S is definitely the one to beat."? How were you able to judge reliability?

hey Dave or anyone.... i just bought a neptune 4 but when i print the nozzle hits the infill... level is perfect on the first layers and when i get past the infill all seems to be good again... im desperate and want to go back to my neptune 3 but i want a faster printer. so plz help me

Here is another video showing an alternative method, in my opinion, quite a lot easier: ua-cam.com/video/LtK0zQTve7I/v-deo.htmlsi=qd1sC9AQfBvZGSbM

Hi, does it need internet connection and online account to work ? Or is a local wifi network with no internet connectivity sufficient to connect to the base station to access video footage ?

Hey Dave! You're awesome-adjacent. Close to awesome. Pretty relatable and not pretentious. I intend to watch more of your vids. Thanks for these handy tips!

Der er meget udenoms snak om alt mulig andet end selve løsningen som kunne have været fortalt på nogle få minutter.

For a bird photographer, do you think it is worthy the money difference of the alfa 1 mark ii when comparing with A7RV?

Remember the support filament is only supposed to be used for the interface layer of your supports and your print. The rest of the support can be anything. You shouldn't burn through 500g of support filament fast unless you overuse supports, use the support filament incorrectly or you just print all the time.

Dave, thanks. New guy and first printer, and your videos have been great. Just managed to do the firmware update successed ( :) ). Your videos alongside Elegoos are really helpful. Thanks for doing this.

I'm not sure which one to buy, Ender 3V3 Plus or Bambu Lab A1? Which is better? 🎉

Hello do you prefer the wired or battery operated version?

Hi I’m looking for recommendations on a mirrorless camera. I am trying to do videos for UA-cam and social media. I’m looking to record footage in 4k with little to no crop but with out a time limit. And most of my footage will be recording in low light settings. For example a music studio with only neon lights for lighting and night clubs for recording live performance.

Noise level too high, layer shift

I am new to 3d printing and have a creality k1c and have had a few issues with it but have worked through them. I am wanted to get a larger printer to print rc airplanes. Would this be a good printer to upgrade to to make the rc planes with?? Thanks

its not a mechanical keyboard, its magnetic.

I appreciate your humorous commentary!

if they would stop using us users a freaking beta testers this video wouldn't be necessary. so tired of this bullshit. go bambu lab printers

I think he's pointing at 50% power but I hard to make out the speed

Are you able to check this footage remotely from your phone? Live or otherwise?

Thanks for your videos man. Thanks to you I'm starting to love my neptune 4 max after about 8 month sitting on a corner

I have one and absolutely love it. Forgot to mention that top spool adapter if printing enclosed for along period, it will soften and the weight of the spool will make it fall. I put a hose clamp on mine to avoid that while printing on nylon cf or pet cf and problem solved.

Who painted those scorch marks on the hull though, a blind woodsman?

How does it play with the AMS? Do I need adapters?

Thank you for this. I have had mine Max for almost a year (my second printer) and have had issues printing outside of the middle section of the build plate. I finally today updated the firmware again and spent a good 1-2 hours leveling the bed, and washing the plate and finally printed out a full size test print to near perfection. Thank you.

More details on how you installed the solar portion would have been helpful

the only bummer is that only Gateron Double-Rail Magnetic Switches ( wich come in 3 variants ) work with it. i have it and thats really the only con but i mean the switches are nice so if you are not super picky you will probably be fine with that

Where's the link for the silicone bumpers?

Thanks a lot for the video mate!

I bought an Anycubic Kobra 2 neo kind of on a whim because ive wanted a printer for years now. I was blown away with how good of prints I could get from a printer that was only $150 but it did take some tinkering and searching for proper settings. But after spending more time trying to get proper bed adhesion or figuring out why my prints always fail after a few hours, its been sitting in my closet collecting dust. I recently saw that this product came out and the combo price was pretty enticing but in was soured with the experiences I had with the Kobra 2 neo. I ended up biting the bullet and getting a Bambu P1s with the AMS pro. I am yet to set it up so I will be updating this comment after I get at least the 50 hours of successful prints that I got and most of that was with printing simple models that were essentially boxes with extra steps.

I just bought this Mavic 3 classic last week after using the Mini 2 for 3 years. Ive watched about 25 different videos on the Mavic 3 series and this is one of the best because it gets to relevant info quickly that amateur photographers like myself want.

Even a year later this video still helping people.... like me! haha TY!

Suggestion: since you are using the filament with the Bambu printers and they don't have a default profile for Elegoo's PLA, why not share your filament settings? :)

Hello Dave you are a God send. I have been trying to get my screen on the Elegoo Neptune 4 pro to work in leveling. I recently updated to the latest firmware and it messed up my leveling it would zero out and stay there. I tried everything from using my imac on lan to use SSH with Putty to update in Fluidd. Nothing worked until your video showed me how to update the screen with a micro sd card inserted into the screen on the printer and now I am back in business. Nobody else had this information. You are awesome.