- 168
- 1 447 901
VanStray
United States
Приєднався 24 січ 2021
Welcome! I'm Kimani with VanStray Designs. I created this channel to share the easy way to do things vs. the hard way that I had to learn. I'm here to share how-to's, DIY projects, and the fun things I do with Woodworking, Epoxy, CNC and Lasers. If I add any new shop toys i'll post some videos of them as well. Thanks for reading and if you're interested in anything in particular hit that subscribe and leave a comment of what you're looking for and if it's in my range i'll make a video about it.
Rust proof table saw, believe it when you see it
Flew out to California for a Party at Harvey and got to see some of their new toys.
Harvey has just come out with new castings for their Table and Bandsaws.
This new Nickel plating is harder, more damage resistant and Highly Water resistance without any additional coatings.
Check out more details here after you finish watching my video :)
www.harveywoodworking.com/collections/ni-series
here's my amazon store affiliate links to some of the things I use.
Amazon Store Front:
www.amazon.com/shop/vanstray
Harvey has just come out with new castings for their Table and Bandsaws.
This new Nickel plating is harder, more damage resistant and Highly Water resistance without any additional coatings.
Check out more details here after you finish watching my video :)
www.harveywoodworking.com/collections/ni-series
here's my amazon store affiliate links to some of the things I use.
Amazon Store Front:
www.amazon.com/shop/vanstray
Переглядів: 332
Відео
Reviewing the Features on the Harvey Big Eye
Переглядів 4692 місяці тому
This is the Harvey Big EYE rip fence. In this video i'm going to go over the differences between this fence and standard fences as well as show you some additional features not found on standard saw setups. Thanks to Harvey for sending this out for me to try on my setup. Also big thanks to the friends that send me some of that b-roll footage of their saws Daniel @DanielDunlap Patrick - @patrick...
Masso to VFD with this Cable from PWNCNC
Переглядів 5676 місяців тому
Masso to VFD with this Cable from PWNCNC
Share with your favorite IT person #IT #techsupport #humor #computers
Переглядів 1,4 тис.7 місяців тому
Share with your favorite IT person #IT #techsupport #humor #computers
OneFinity: Journeyman Masso Upgrade
Переглядів 1,3 тис.8 місяців тому
OneFinity: Journeyman Masso Upgrade
Product Spotlight: Chill Epoxy product lineup
Переглядів 214Рік тому
Product Spotlight: Chill Epoxy product lineup
Product Spotlight: Totalboat product lineup
Переглядів 157Рік тому
Product Spotlight: Totalboat product lineup
Setting up the Huanyang VFD for my CNC
Переглядів 15 тис.Рік тому
Setting up the Huanyang VFD for my CNC
Onefinity: Swapping the Spindle Holder 65mm to 80mm upgrade
Переглядів 1,3 тис.Рік тому
Onefinity: Swapping the Spindle Holder 65mm to 80mm upgrade
Custom workbench build for my Onefinity CNC
Переглядів 2,8 тис.Рік тому
Custom workbench build for my Onefinity CNC
Onefinity: Unboxing and setting up my Journeyman X50 CNC
Переглядів 4,5 тис.Рік тому
Onefinity: Unboxing and setting up my Journeyman X50 CNC
Wish I knew this when I started using epoxy!
Переглядів 1332 роки тому
Wish I knew this when I started using epoxy!
Align your Laser mirrors in 20 minutes.....maybe.
Переглядів 7 тис.2 роки тому
Align your Laser mirrors in 20 minutes.....maybe.
Upgrade your Omtech Laser Exhaust Fan
Переглядів 8 тис.2 роки тому
Upgrade your Omtech Laser Exhaust Fan
Upgrade lighting on Omtech 80w Red and Black
Переглядів 5 тис.2 роки тому
Upgrade lighting on Omtech 80w Red and Black
Installing your new laser tube on Omtech 80w Red and black
Переглядів 9 тис.2 роки тому
Installing your new laser tube on Omtech 80w Red and black
Into Series to setting up my Omtech 80w Red and Black
Переглядів 1,1 тис.2 роки тому
Into Series to setting up my Omtech 80w Red and Black
Great video, I've seen a few of these. Hope you enjoy your saw, and I can't imagine how you felt watching that falling off the truck
Just think, you get to wait some more and have all that anticipation again. It’s so exciting.
Showed up to that house with 3 fucks and he left with 3 fucks....how many did he give that day class?
Why didn't the jabroni drop the jack? All he had to do was pull up on the lever. Instead he parked the jack engaged on the edge of the lift.
Just the way the guy walks speaks volumes🤦
Should of been strapped to the pallet. Not just wrapped. Didn't help that the pallet jack was hanging off the lift gate.... i wonder if if was stacked top heavy on the pallet as well....
Strap the load to the pallet for one... Doesn't help the guy had the pallet jack hanging off the lift gate.
I bet if it'd be a package for the trucker he'd done a better job delivering but no one cares about anyone else's stuff these days no respect. Pathetic to me that he had no reaction or sympathy for destroying someone else's things speaks alot of the personality and character of him.
He was expecting gravity to be off today
dude did even try to keep it from falling
Damn no reaction 😂
Bob you only had one job to do today
That literally looks the dude who used to deliver to our plumbing shop from worly plumbing supply lol
Imagine making a fake ass video like this and ppl believe it’s real.
I'm sure he'll be expecting a tip. 😂
What you didn’t see was the delivery drivers camera inside the truck shooting a tic tok video.
This failed because it had 2 pallets a plastic one and a wood one the plastic skid slid back off the wood skid causing the mishap, next time luis it (side joke).
That delivery man is only qualified to scratch his ass. What a loser.
Please do not judge all ABF drivers like that.... He is the saddest ABF driver I have ever witnessed
Wow ive seen idgaf on the job before..but this dude takes the cake! 😂😂😂
You use the pallet jack to turn the skid around inside the truck and then carefully push it onto the ramp and pull the handle on the pallet jack to let it down and then lower the ramp.
First and last day on the job.
I'd say just load it back on the truck
Amateur. Those hoists are notorious for that. He went too far to the edge. Take two jacks. One outside, one in. It's a pain, but so is damaging goods. And seriously, this driver looks like a schmuck.
The item isn't that important. WHY? The camera guy never bothered to help.
It is what it is, the guy.
Dropshipped, literally.
The fact you calmy helped him load it back up is incredible. Most people these days would have freaked out. People snap over WAY less in 2024 😅
Total amateur, i did those deliveries for a few years, he did everything wrong you could 😂
That's a moving truck. It's probably an already messed up item used to set up this video.
Dumme menschen im falschen Job
Dude hates his job and it's understandable. Still, you should still do that job correctly.
Cheap labor isn't cheap.
Idiots like this has(had)a job and I can’t find work?😂
Whatever it was... it's dead now!
Absolutely the wrong way to do it, but in his defense that type of tail lift in particular is poorly designed
I'm f tired of idiots in all trades.
Almost as if the driver wanted that to happen.
Look at him. Fucking hell man. Thats peoples hard earned stuff.
He's the type of guy that I would immediately send back home if he showed up to the job site "looking for work". His body language speaks for him.
What was his end goal 😂
Obviously, this guy does not care. Do not accept delivery.
The fact that the "reciever" didn't say anything about it until he actually started the lift.... fake news. I woulda been at the very least saying "please be more careful". At the worst I am filing for a refund right when that carrier wheel dropped off.... wtf
That's why most drivers would've put it 90 degrees when putting it on the tail lift and then lowered it.
Not his first rodeo
Employable NPCs
Not surprising....total slacker....probably had to have someone piss in a cup for him to get this job
Dude also works for UPS I guarantee it 😂😂
After the front wheel of the jack rolled off, this was basically guaranteed without an extra set of hands (or two, realistically). No, he couldn't have dropped the jack to try and save it, not unless that jack has some sort of stabilizer for this exact situation. And if was heavy enough to need a jack, chances are it was heavy enough he couldn't have safely lifted it back onto the ramp.
Has it facing the end of the ramp instead of turning it sideways. This is what you get when you hire meth heads.