Відео

Have you had any issues with this pump ever since? I'm thinking to put the 40 version into my Fluval Flex 15 and add some random flow generator nozzles to hopefully not need a wavemaker.

Wow!! Glad I looked this up before using..threw my bottle away!!

Very helpful 😊

This or reef float?

That's just as good as my Redsea

Fantastic video, finally someone just explains it by actually showing you a simple set up. Thank u!

Love your videos! Please could you tell me dimensions of DMP 10 20 30 40 dry side. I am trying to figure out what size will fit behind my aquarium. Thanks

Where did you buy the cable to attach the backup to the powerhead?

13:10 turns out he was just hiding for a few months - I still have this goby 2 years later 🙂

Hallo, where did you het those holders for the AI blades?

I just purchased two of the Gen 2 200 watt version.$640 for 2 lights is not what I call a budget light.These lights are for the intelligent reefer.I will never pay $500 - 1000 for one light,thats called a ripoff.

Does anyone know if this pump fits through the neck of a Red sea reef can ? Thanks

Thanks Alex, this is a great review. I designed my sump to have a water depth of 400mm. I wasn't sure how I would get the operting height correct if I bought one of these though now seeing your review I know the water level will be fine with the adjustable bracket height. It has made me 100% confident in purchasing the unit. On a side note, how thick can the acrylic be on the sump for the brackets that come with the unit, is it about 10mm?

I love how instead of it just saying like MP40 it says dmp40

hello, so you don't dose automatellecly with the Reef Factory KH Keeper's doser ; is it not unhandfull to not dose with automatic doser of Reef factory ? which is the pro here ? thanks for answer ;

Great review thank you, I will also order but just one question, how do you configure the plug type when ordering? I need for instance an EU plug. Was wondering how yours came with a UK plug when you ordered from the USA

I have one of these, the acrylic swells and deforms a bit, so I needed to keep rubber bands on it to keep the roll on. I have found that it needs to come out everytime it needs a roll change

Long-term update. The feed mode stopped working after about a year - it still goes into feed mode but the pump no longer turns back on at the end of the timer. So I have to turn it off then remember to turn it back on manually. Otherwise it still works fine and is still nice and quiet. I'll probably replace it at some point because of the feed mode issue though, it's just not urgent.

To get perfect amount of water in the vial you need to target the lowest point of liquid curve to match the line (not a circuit but central point) :)

How long does a roll last for use? and how does it compare to other roller mats that are cheaper to operate? I'm asking because I have a new, unused Reef Factory Roller Mat S and I don't know if it's worth installing it in a new tank or buying a cheaper replacement. 

Would you say the fluval Evo with the upgrades is the ideal desktop tank for the price ? Others in comparison are alot more expensive.

Hi do you recommend the pump now . ? 😅😊

UV changed the game for me after I had my first ich breakout. I went for the TMC uv vecton titan and really like it and use it on my Red Sea 170. Able to fit it inside the bottom cabinet.

The quartz bulb allows about twice the amount of the radiation to pass through vs normal glass bulbs. Hence Deltec’s claim for 2x the power. It also makes the bulbs 2x as expensive.

I’m sorry mate but that UV is not nearly enough to achieve proper sterilization in your tank. At its max recommended flow rate of 500L per hour (required to achieve sterilization at 33,000 microwatts/sec/sq.cm) you will be well below 1x tank turnover, which means you will not efficiently process the amount pf water required to achieve your goal. For that you would need to have the Deltec 39w unit.

cool that you use metric units in the thumbnail picture. one advise: just use cm not cms even if it is longer than one cm

Dear Sir Reef of Dork, sorry to bother you, as this battery is no longer available, could possibly you recommend a replacement to power my vectra M2? Thanks in advance 👍

I have the 39 W model. The gasket sucks. At some point the water will leak and go through to the electric connection, and as a result you will have a short circuit, a power outage at home and a fried power supply. And the replacement is about 90 €. After my second catastrophic failure, I put some teflon band around the gasket.. I hope it will work. But I believe the design is wrong. You cannot separate the electrical connector from the saltwater with a rubber gasket which will degrade.

Deltec bulbs are made of quartz not glass so more UV is produced compared to a normal glass UV bulb

redsea is not an aquarium for beginners ! everything is very complicated

I have the 48 plus a small DC pump but I have not got round to installing it yet! I had not thought of putting it in the sump but it makes perfect sense and will spur me on to getting it fitted! Unfortunately my sump is just a little too shallow to use your bracket. Any chance you could make a version to fit the slightly larger centre tube section with the flange sitting on top of the bracket??

Re the uv transmission loss/gain. They are comparing glass vs quartz BULBS producing the UV not the sleeve

I've just picked up the 48w for my system. I believe the flowrate is what they rate the unit for at 33,000 microwatt's/sec/sq.cm. off the top of my head (its gone midnight) i think you need 300k for parasites so 10x slower than its rated for.

Cool ! I was impressed with the price of the sicce ❤

For anyone who needs to know the uv rates for algae vs parasites. 20 watt version rated for 1000 litres 1000 litres per hour algae. 1000 ÷ 2.18 for parasites. 39 watt version rated 2000 litres. 2000 litres per hour algae 2000 ÷ 2.18 parasites 80 watt version rated 4000 litres. 4000 litres algae 4000 ÷ 2.18 Parasites. Not a manufacture recomendation but i run my deltec 80 watt uv at 4000 ÷ 3 (1360 litres per hour) as bulbs lose intensity over the year. Works like a charm.

Vecton Titan for the win

Can you put a link to the 48w uv? Thanks

If you go on the DD website it lists flow rates for a reef tank and a fish only tank. The fish only tank gives you a slower flow rate. Im guessing thats for parasite control. In the case of the DD 10w UV the minimum flow rate is 230LPH and for the 39 watt its 920LPH minimum

They say a quarts sleeve allows more UV light to pass through it than the equivalent glass that why the equivalent UV rating is doubled for them. Also, you know when the UV bulb goes out because the transformer makes a beeping noise and the light on it turns from green to red

I love these review videos!

Mate a 10 watt UV steriliser is not going to do that much to parasites,. I get it that is a nice compact size UV but the longer the sleeve of a UV the more contact time it has to damage parasites. If you wan't a compact one you better get the Aqua Medic ones. Water goes through the Aqua Medic ones in a swirl around the UV bulb for better contact time. For killing or damages parasites water should also go slowly through the UV unit.

Fellow quartz sleeve breaker numpty here 🙋‍♂️ 😅

Love the reality of braking the bulb 😂❤

Hi @Reef Dork, Good vid and info, thanks (& sorry about the quartz sleeve!). Quartz sleeves are a pain, and were always being broken in the large wattage units used for ponds where I used to work...and they ran to nearly £100 for a replacement (~25 years ago). Maybe the difference in unit length is if they use different bulb types, e.g. your 10w looks to have a "double tube"/side-by-side one, but perhaps the 30w has a "normal" fluorescent-style tube? Cheers, Rich.

These don’t seem to be available through Deltec USA yet I’m curious how they compare to aqua ultraviolet - because a 57 watt is about $500 from them

This video is basically porn for Ryan

What brand is that rockwork in that tank?

do you think the nicrew 200w would be better then 2 ai prime 16hd..?

I’m waiting for your review on the Nicrew G2 before deciding on my light. Could you please mention which light you’d choose? Your high marks for Reef Factory lights have made things confusing when watching your videos before deciding on a light.

Thank you reef legend, this is incredibly useful! 👍