Відео

@@Fallz3x thank you for your kind words, it means a lot to me and keeps me motivated to make these videos. I wish you a great day 😃✌️

@@ShakeyMcThrottlepunch thanks Mate, i will do a video about the tools i use, including the links, and let you know when its online ✌️

@@user-ev5xv9lj3t Ich muss selbst nachschauen wie das Teil heisst 😅 Ist eine Art Arterienklemme glaube ich. Hab sie warscheinlich mal auf Aliexpress bestellt, mache aber bald ein Video zu diesen Tools mit Links, sollte in 1 bis 2 wochen dann online sein. Schönen Tag noch und bis bald ;-)

@@HILDEGARDO2 i got them from Aliexpress, i will make a video about them because i getting asked a lot about them. I think the video gets out in about 1 to 2 weeks. Cheers mate ✌️

@@SebastianCanale 😄👍

@@boboscurse4130 you mean the hooks? Did you use a deburing tool on them?

@@Dirt-E-Bikes No I mean the snaps themselves.

@@boboscurse4130 ah oke, so it could be many things, but the most comen imo is in the print settings. Check these first. Maybe you have inner and outet walls that are slightly bigger or shorter than they should be. You can do a testprint an measure it to find that one out. Holes in prints often get a bit smaller diameter than they should. Also did you try to cut a bit away with a deburing tool? If that works, its also probabely that you have to check yout print settings. Maybe the material flow a bit too high, that was it in my case.

@@tebald Hi Tebald, im not sure wich one it was, but i can tell you how i did it. I buyed a cheap wifi extender (one with a ethernetcable-out) and just pluged the ethernetcable thats included with the printer in that one. That is simple and works well.

@@glitchplaysgames714 thx mate :-)

@@dragonzaid945 Hi Dragonzaid, thanks for the input, i can look into that, but it will take a while. Is there a problem with your original extruder fan? I did not had any problems with the original part for now, but maybe we can do a more powerful one or a more silent one.? Have a nice day ✌️

@@Dirt-E-Bikes I've been having trouble with my 3D printer overheating when I use it in an enclosure. The internal temperature rises, causing the filament to soften before it reaches the hotend and creating clogs. Because of this, I haven't had a successful print in a month. I saw a fan shroud on Printables from OrzOrzOrz and was wondering if you could possibly do a video on how to install that mod on your printer. I think it could really help with my issue. Thank you so much for your amazing content and help!

@@dragonzaid945 hey, i looked into it, the mod from Orzorzorz looks nice, but the latest version (v5) seems zo be not finished and have to be modified. That would take me a lot of time (Modigying the v5 model, ordering extra fan, building, filming and editing) and the video would be out in aprox 2 month, i guess thats way to late as you wish to get your printer up as fast as possible. Is your printer working fine without the enclosure? Do you print parts that require the enclosure? If you just need very strong and heat resistant filament, i could recommed trying the "NiceBio" filament i am using in some videos (adderini video for example). That prints very good on the N4 without any problems.

@@Dirt-E-Bikes Thank you for replying; it means a lot to me. I will try that filament. I built an enclosure for my 3D printer using drywall material, with a wooden frame and double-layered walls. This setup offers several benefits, such as allowing me to print at night without disturbing my neighbors and significantly improving bed adhesion. However, my 3D printer has been plagued with issues, and now I'm dealing with filament clogs. After extensive research, I discovered that the heat inside the enclosure causes the heat sink above the hot end to get very hot, prematurely melting the filament.

@@dragonzaid945looks like your enclosure is well tought, i want do build one too at some point but did not think about the improvement of the noise that would come with it. That would be a nice benefit, because lets face it - the N4 is very loud... So i can totaly understand why you need one. When you are printing without it, or when you print with opened enclosure, does the problem disapear?

@@lorengeist thanks, its the first part of the series, i am currently editing part 6 ;-) Enjoi printing ✌️

@@halsti99 Yo Halsti, absolut, drucke noch immer mit der aus Messing, habe schon lange die aus gehärtetem Stahl parat, aber die erste die ich eingesetzt habe ist immer noch top. Keine Probleme bisher und nie verstopft. Kann ich empfehlen ✌️

@@Dirt-E-Bikes neato. danke danke! :)

@@halsti99 gerne 😄✌️

@@1pokemon2fan3kv Hey Pokemon fan, i planed to do a video about the tools i use, i like them, they do what day should so but to be fair, they are not the best quality... But also very inexpensive ;-) I will let you know when i edited the video (have to search for all the links to the products as well), or if i find the time to search for the product links, i will write them to you before i do the video ;-) Cheers and wish you a nice week

@@Cheeto320 noooo 😅 Did you conntact elegoo support about your problem?

@Dirt-E-Bikes I have, I will provide an update once I hear from them. (It's been less than 24hrs)

@@Cheeto320 ok, i hope the best for you and that they can fix it or take it back and send you a new one. My local seller (not ELEGOO) did that, but i was waiting over 1 month to get it replaced. I guess if you ordered it from Elegoo directly, it should not tale this long.

@@ladyliss5516 its was one of the first videos i did on the N4 upgrades... And i just mentioned to buy a cheap wifi extender with a ethernetcable output, to use the inclided ethernetcable that came with the printer. All you have to do is to connect the wifi extender with your router (as normal) and open your browser to type in the ip adress of the printer (you can see your printers IP on the display of the printer). If you do that, you can run the printer from your network (works with every pc or phone connected to your wifi). So i hope that helps you, you can find cheap wifi extender on aliexpress or amazon, just take one with a ethernet out.

@@marioremy2753 you are very welcome. By the way, this is part 1 of 5, i am currently editing part 6 ;-) Have a nice day printing ✌️

@@THESWAGGYVR Hi Swaggyver, cool name ...😄 The link should be in the video description, if it not works, please tell me then i take a look. Have a nice day ✌️

@@Dirt-E-Bikes thanks

@@THESWAGGYVR you are welcome ✌️

@@pubgwithleo5596 hey Leo, you can do it by any browser on your smartphone, at least if you are in the same wifi (printer and phone). Just type in the IP of your printer. Hope that helps you. Have a nice day ✌️

​@@Dirt-E-Bikesthanks alot 👍

@@pubgwithleo5596 you are welcome ✌️

@@Dirt-E-Bikes I'm having some problems leveling the Neptune 4 bed Any tips? Juat got mine Neptune 4 a few days ago.

@@pubgwithleo5596 Hi Leo, what exactly is the problem with leveling your printer? In general, you have to first manualy level the bed (do this for so long until you are happy with the leveling), then you can do the automatic leveling (the mesh). If you use fluidd (your PC connected to you printer) you can also look at the mesh after automatic leveling, and can adjust it by the leveling gears again, if there is one side that is more out of level. But after you did this, you should also do the mesh again. In my nevest video are also clips to lock the leveling gears, if they come loose on your printer while printing. That can help too.

@@TopBlackWaterSniper thanks Mate, i think to the time of the video i just used the standard (fast) settings for PLA. So 250 speed and 220°C on the nozzle, 60 on the bed (if i remeber correctly). What filament are you using?

@@Dirt-E-Bikes , Elegoo PLA neon green. (Kawasaki green 😉)

@@TopBlackWaterSniper nice, that printer will look sick when you install that 👍 What is the problem when printing spine and chain? Does it fall of the bed mid print?

@@Dirt-E-Bikes , it gets about 3% in and then gets all messed up. I ordered some Elegoo Rapid Plus+ filament to see if this might be the problem. The bed corner stops have been the only 2 things that printed with no problems. X and Y axis stoppers prints get a little over halfway done and then get snagged and then it’s ruined.

@@TopBlackWaterSniper ou, that sucks. did other prints go well, or had you similar problems with that printer and filament in the past?

@@Onyxaxe Hi Onyxaxe, i painted the xtruder, the frontplate and the fan, the rest are 3D printed covers you can glue on the printer. I have them available on my patreon page for download, but will make them available for free as soon as i make a video about it (probabely in 1 to 2 month). Wish you a nice day and thanks for you kind comment 👍

@@stevenbusk539 Hi Steven, for the chains, i go with the cheapest SRAM or Shimanos, whatever is cheapest at the moment. I do this since 10 years and never had a problem. "Quality E-Bike chains" are not worth it imo, they do the same as the cheap ones. You better go with a quality brand and take the cheapest model. But yes, there are a bunch of more expensive models you could use, they will work as long as they are compatible with your shifter and gears (10s,9s, or whatever your numbera of gears are).

@@xiphoid2419 hi xiphoid, i printed them in PLA from polyterra. Mine came out a bit stiff too, but i had no problem open them enough to get the leveling gear in.

@@vooodkathetruthseeker6747 yes, its part 5 of this series, so there are 4 other videos ✌️

Thanks Thomas Yes the Voice is new, i used a "AI voice" in the past (Text to speak), this time i tried to speak it with my voice but was not satisvied with the result, so i found a voice filter, that just made my english sound a bit better clearer. I myself am not sure whats better or worse. So you liked the AI voice (from the previous videos) was better? Im happy to get this kind of feedback, thanks for that

​@@Dirt-E-Bikes This voice is much better, but it is also clearly synthetic, and makes it seem automatically generated. Even if your own English is poor, people will like it better.

You mean the stabilizers? Im not sure if they also fit the N3 max, but you can trie.

True, only the stok settings...

@@Dirt-E-Bikes u should to, it'll make outer walls a way smoother.

Thank you very much for your kind comment. Really appreciate that. Wish you a nice day 😃✌️

You are welcome, thanks for your comment 🙂

I had only minor issues, and they are gone now. I wish you luck on yours 👍

It will 😅

To bad to hear that 🙂‍↕️ In my case, i had only minor issues with the bed going ou of level. Since i installed them, i had to re level only once... Yes sure, if you find something that works better, please let me know. Allways appreciate that 👍I wish you a nice day ✌️

Your solution is OpenNept4une custom firmware. Fixes all the software issues of the stock one.

@@kenyajobs1069 will take a look on that, thx

Thanks a lot Bill, it took me a while... I hope i can do part 6 somewhat faster ;-)

If you want, i can send you the 3D files from patreon for free, so you can try them. I tried to unlock you on the patreon page, but it seems that this option will only be available in the near future... Maybe i can try to send it to your UA-cam-Email (@billmacfarlane...) ? But im not sure if that will work. Maybe you have a better idea how i can share the files with you? Have a good day printing ✌️

Happy to help anyway I can...let me join the Patreon and then you might be able to

@@billmacfarlane8864 Thanks mate

@@billmacfarlane8864 But i am not sure how and if that works on patreon (yet). I tried to send it to your youtube email but that does not work unfortunately. 🙂‍↕️

Thanks a lot Sofie 🙂

Great to hear, and thanks for your comment 👍 Im curently editing part 5 of the series ;-) Keep on printing and have a nice day ✌️

Thanks mate, you are very welcome, im currently editing part 5 of the series ;-) Have a nice day ✌️

Thanks mate

Hey Tiago, true, i tried something new on the next upgrade/modification video i release next week. Pleas let me know if its any better. ✌️

Thanks mate, this video is part 1 of 4 of the neptune upgrades/modigications. And im currently editing part 5 ;-) Happy printing ✌️

You are very welcome, by the way, its a whole series i do on the upgrades/modifications with 4 parts for now, and currently i am editing part 5 ;-) Have a nice day printing ✌️

I found better upgrade when it come to the stabilizers

@@clark1012 cool, can you share it?

I think i have seen a similar modification for ender printers as well, maybe you can find one for your printer on thingiverse ✌️

@@Dirt-E-Bikes Yes, I already installed one. Thanks!

@@RetroDaddyPH nice 👍

Thanks Sofie :-)

Danke 🙂👍

They are available on my patreon ✌️

Finally one that gets it 😁

Thx mate :-)

Very cool 👍 how big is the area you plan to multiboard? Yes even with 7x7 tiles it took me quite a long time to build my (smal) multiboard ;-) But it was worth it, and a whole wall will be that much cooler then only a smal board! Let me know how it went, and i wish you a good time building it ✌️

@@Dirt-E-Bikes superbig area we are talking about two whole walls, but im starting to think to buy ikea pegboards and just print stuff to hang and use my printed multiboard on smaller surfaces.

@@Glorious_Yell0wYes i guess that would take a long time printing... Did you see that there is a option for stakable printing?... That way you could let your printer print multible tiles at once... But still, you would need a lot of time for your area. I guess the ikea boards with prints is a good option too, especially for larger walls.

@@Dirt-E-Bikes No i havent seen that, wow that would really help. Im thinking about uppgrading to a new printer. Im using a flashforge adventurer 3 now. But thinking of going bambulabs or what ever they are named. =)

@@Glorious_Yell0w yes a bambulab carbon or something similar... That would be great, but it also have its price 😅

Thx kolver, Yes, that was close 😅 Im not sure why the 6+2 pin connector fited in the 4+4 plug... That should normaly not be possible, right?

@@Dirt-E-Bikes Well i have no clue why those cables fit there but I have seen some people on Reddit who did the same mistake and just didn't notice that those GPU cables aren't fit for CPU cables and they either ruin their motherboard, CPU or GPU. Also you shouldn't use old modular PSU cables in a new PSU cables. That result in the same failure. PSU and motherboard manufacturers should really come up with a different connector it's too easy to mix up

@@kolver624 true, and thanks for the infos. i asked myself what the difference is between this two connectors, the only thing i heard was that "you cant do it wrong, because it only fits in where it belongs"... That does not seem to be true, at least not in my case ;-)

You are welcome, i did 3 more parts of upgrade videos for this printer and part 5 will be available soon ;-) Have a nice day ✌️

Thx mate, you made my day 😃👍

Thx MrGeuggis ;-)