Відео

Might be popping down to your dragstrip in early/mid September, see if your seafront is better than my little service road... #foundya

Hey nice run. I think that really this is the speed this car wants to go and anything above this is just asking for trouble! I'm already fed up with mending mine and thinking I need to put it back to brushed. Good luck in the contest 😁

Nice start 👍 Yeah careful with the steering, it's very nippy. You'll start sweating when reaching higher speed 🚀😁🤝

Awesome to see you back again, Ian. I love the paint job and of course, your filming location is the best. Good luck out there, pal!

I never thought an RC car would help pick up chicks, I'm married so that's out the door for me anyway, then again, around here you get looked at like your special or something driving an RC vehicle...... Great job mate!!!!

Love the colors, looks great. I'm really surprised to see the wobbling in these kits. Mine goes straight as an arrow. Love the skate park bit. Good luck!!!!!!!

Great start, Ian! Funnily enough exactly the same speed I got when mine was stock. It can only get faster! Go well! :)

Nice spot there! A solid result to build on 😊👍

Nice first run and a good base to start. May I recomment a gyro? This shouls straighten the run.

Do they make a ball diff for the sand scorcher cos the Tamiya one is crap ..forever coming loose so no drive even with loctited to the nines I’ve tried all colours non lasts long .even used industrial cyanoacrylate nothing works ..even had the adjusting nut shear off ..waste of money and not cheap either ..

At first I thought I didn't need them. But the plastic shafts twists after installing a more powerful motor. You also need to upgrade the dogbones/cup joints because they also twist. The wheel hexes should be upgraded to, as the plastic ones can crack. The motor installed is a 6.5T, quite a far jump from the stock torque tuned.

Holmes Hobbies (youtube) has a great, quick, and simple explanation on adjusting the timing of your motor. It really helped me. Check him out! Your mod by mod speed run testing is also great by the way, keep it up!

I just got back from Japan and picked up a bunch of hop ups some Tamiya and some Eagle Model. The car runs really nice now and I also have enough spares to have a second TT02. The parts there are cheap where it says 750 for the deck that 750 yen or 3.75 quid which is what I paid for mine woohoo, thanks work for sending me to Japan.

That's not what I was expecting! Shake down at the skate park!

How did you get the pinion onto your brushed motor? It seems like the motor shaft isn’t long enough to put on the stock pinion?

Looks great 👍

Get a TT-02 D kit and get ball bearings, a motor heat sink, oil filled dampers, sport tuned motor, probably more, and all for a reasonable amount more. I bought one and decided to get another and make a touring car from that kit rather than a TT-02 standard kit, I have some good road tires and now have spare drift tires too. Look into it, just not many bodies for the chassis option though. I like getting extra bodies too though for the few chassis I have, painting is part of the fun. Enjoy following your progress and will be making my own TT-02 journeys also buying pinion gears and spur gears myself now.

Major problem is the gear ratio on a TT is way too low for speedruns. Most you can get out of the mod 0.6 pitch is 5,74 FDR with 64/29 combo. Thats great for a 17,5 blinky but nowhere near what you need. Do yourself a favor and switch it over to a 48 pitch with the yeah racing slider motor mount. HRC black delrin spurs are bolt on to the tamiya high speed spur holder. If you want a daily 48 ratio kimbrough 301 66/24 with 2 extra holes to mount it. That gives you a FDR of 7,15. That's fine for the box stock torque tuned or hotter brushed can. My final drive ratio was 4.4 with a 60/35 48 pitch and a hole in the spur cover to hold such large gear. On top a F540 4370kv on 3s. That was good for 60 mph+ Number for said spur gear is HRC 74860 LW for the 60 48dp and Kimbrough KB301 for the 66 48dp

The carbon upper deck and battery holder are useless upgrade as much as the carbon fiber bumper holdef. Alu steering linkage, high torque servp saver, alu propeller, oil shocks and adjustable arms are the best ipgrades u need. If u want to compete oil diff and cvd is not a bad idea, it is just a very expenaive set and , forthat price, j qould get some higher end car

Awesome! I'm finally going to enter the challenge this year so I'm pulling everything together that I need for this...awesome!

Some very nice upgrades there. A hopped up TT02 feels so much better imo 😇 I have upper deck from Fibre-Lyte in UK 👍

People new to Tamiya will never understand they will reproduce like rabbits 🐇 Good luck on the 01X challenge!

I would like to put the carbon upper deck on mine. Did you get it from JK-RC? Also, I love the Tamiya rally cars, I have a few myself but I really want an Escort cosworth like yours. Stunning looking car!

BTW it helps to remove the front bumper to work on the servo arm.

I had several comp grade crawlers and I find this CC-02 (73 Bronco) the most fun on the trail, even more so thany SCX10. So why spend the money for a steering link when the stock one works well, I did replace the plastic drag link with an Axial 98 tune (green anodized) with Axial (Traxxas) rod ends which I have plenty in my parts box. Works great and no bump steer

West Sussex here too, near Burgess Hill... Need somewhere to speed run i can get to on public transport!

Feel for ya. Thanks for sharing. I avoid white like the plague.

Great build 👍🏻

Should of saved your money lol

Hey nice build. Yeah this kit is a bit wibbly wobbly in places like you say. I don't think it's very fast out of the box and it's a bit all over the place so the contest will be tricky. I look forward to seeing how you get on 😁👍👍

Adams playground over 50mph so far but not sure gps is correct so ordered new one

❤👍👏🔥😎👑🤩🏆🤣coool

Looks great.

Fantastic looking beetle.. I love it!

Late to commenting but that looks the business ❤

Hey you've done a lovely job on that 👍👍 Good luck with the contest 😁

Where about’s is this? I didn’t know it existed, near the park?

Great colors!

Where about’s are you based? Looks like Bognor Regis?

Where you buy body?

Great job on the body, those stickers made it pop! Lots of luck on the challenge! 😎👊👍

Looks awesome. Wishing you great runs and lots of fun 👍

Good looking body, now let's get it going fast! :)

It looks fantastic!! I'm happy to see you I this. Best of luck!!!

Looks awesome mate!

The stickers makes the colours look great!

looks great! best of luck

Nice paint job, loving the colour scheme you got going on there. I'm struggling with the rain up here can't get any painting done yet and there's not a lot of spares for this chassis in Wheelspin Models, all the main bits are sold out and it's only going to get worse. Got the car sort of built waiting for the bearings to come soon I hope. Good luck with the SRC, it's going to be a fun one for sure.😊😊😊

The body looks well!

All you had to do was recalibrate the esc 🤦🏻‍♂️