Von Lipich Racing
Von Lipich Racing
  • 34
  • 27 057
BLIS DELETE - F150 ForScan Cheat Sheet - NO MORE ERROR LIGHTS!
Finally the truck is done! No more error lights on the dash!
Here is the link to the ForScan cheat codes. There are a lot of neat things you can do.
FORScan 2015-2020 F150s - Livnitup - Google Drive
docs.google.com/spreadsheets/u/0/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/htmlview?pli=1
Переглядів: 32

Відео

BLIS REPROGRAMMING AFTER TAIL LIGHTS STOLEN (2015-2017 F150)
Переглядів 513День тому
Here's my attempt to reprogram the BLIS sensors and get the tail lights back to 100% after the stock ones were stolen. This is the link to the ford website for As Built Data: www.motorcraftservice.com/
Road King sounds!
Переглядів 47День тому
Road King sounds!
BEST BEGINNER BIKE FOR TALL PEOPLE (2004 HARLEY ROAD KING REVIEW & DRIVE)
Переглядів 2,9 тис.День тому
This motorcycle has been an excellent addition to the garage and has been a great something to drive for fun when the car is down. As mentioned in the video, it is a 2004 Harley Davidson Road King Firefighter Edition FLHRI. Hope y'all enjoy the video!
WHAT TO DO WHEN YOUR MT-82 BREAKS (CALIMER STAGE 3 FIRST IMPRESSIONS)
Переглядів 16714 днів тому
Here's my tips for installing any MT-82 along with some thoughts on transmission choices and initial impressions of the Calimer Stage 3 MT-82. As mentioned, here is the part number for a 26 spline clutch tool that you can grab at the local parts store: Dorman 14523 Hope this helps! Let me know if y'all have any questions.
BEST DAILY EVER (2017 FORD F150 PLATINUM 5.0)
Переглядів 99Місяць тому
Review and mods on the best daily driver I've had to date. See below for mods with links: Raxiom led fog lights www.americantrucks.com/axial-led-fog-lights-1518-f150-excluding-raptor-ford.html Morimoto XB tail lights www.americantrucks.com/morimoto-f150-xb-led-tail-lights-black-housing-red-lens-lf722.html IMRC Lockout www.uprproducts.com/upr-15-17-mustang-5-0-coyote-intake-manifold-cmcv-imrc-lo...
ABS Delete & Custom Brake Lines for S197 (11-14 Mustang)
Переглядів 145Місяць тому
There are many ways to do an ABS delete and custom brake lines on these vehicles but here is how I did it! All the parts along with tools are listed below. The approximate cost is less than $300. I hope this is helpful to and if y'all have any questions or critiques let me know! REAR: Pegasus 3265-39 M12x1.5 inverted flare to -3an male flare All star Performance ALL46304-12 12” braided steel li...
F150 TAIL LIGHTS STOLEN! THE STORY & HOW TO FIX!
Переглядів 6 тис.2 місяці тому
It's becoming a more common thing for thieves to target F150s with the BLIS sensors in the tail lights. I never thought this would happen to me, but here is what I have learned from the event! Here is the link to the LatchLid product I installed to prevent further theft: latchlid.com and the Morimoto Tail Lights from AT. www.americantrucks.com/morimoto-f150-xb-led-tail-lights-black-housing-red-...
JEGS Drag Seat Install (11-14 Mustang/S197)
Переглядів 1053 місяці тому
Short How To video for installing a drag seat into an 11-14 Mustang (S197). This is done for a street setup and not an all out drag race setup. For a race car the seat should have the back braced against the roll cage. For a lot of us though, this style of seat works great. Especially for a tall person, these seats help lower your body and give extra head room for wearing a helmet. Also note th...
Chanel Update!
Переглядів 2143 місяці тому
After a long break from UA-cam, I am starting to make some more content! Comment with what you would like to see and any questions you may have.
How to DELETE your DEGAS bottle! (Custom Coolant Setup 11-14 Mustang)
Переглядів 993Рік тому
I've always wondered how to do this myself, so after consulting with the experts and getting all the right parts, we now have a very clean custom coolant setup. This tank is made by BL Fabrications and the lines were sourced through Coyote Direct & Evil Energy. Drop any questions in the comments below.
HOW TO: Bleed Clutch / Tap Manifold / Route Boost Lines
Переглядів 285Рік тому
HOW TO: Bleed Clutch / Tap Manifold / Route Boost Lines
Custom Fab work to make Turbo Kit Fit!
Переглядів 2,1 тис.Рік тому
Custom Fab work to make Turbo Kit Fit!
Making AN lines, finishing oil feed & return, and CUTTING the tubular front end!
Переглядів 337Рік тому
Making AN lines, finishing oil feed & return, and CUTTING the tubular front end!
S197 Battery Relocation for $200!
Переглядів 2,4 тис.Рік тому
S197 Battery Relocation for $200!
Back to the Street Car Life!!! Dash is IN!
Переглядів 96Рік тому
Back to the Street Car Life!!! Dash is IN!
Frankenstein Coyote Build Part 1
Переглядів 2,3 тис.Рік тому
Frankenstein Coyote Build Part 1
Bruiser Update - Engine finally IN!
Переглядів 435Рік тому
Bruiser Update - Engine finally IN!
How I Turbo'd My Coyote for $300!!!
Переглядів 577Рік тому
How I Turbo'd My Coyote for $300!!!
Motion Raceworks Steering Column Review (11-14 Mustang)
Переглядів 592Рік тому
Motion Raceworks Steering Column Review (11-14 Mustang)
How I BLEW UP my Gen 5 Whipple Coyote!!!
Переглядів 960Рік тому
How I BLEW UP my Gen 5 Whipple Coyote!!!
700WHP Whipple Coyote Stick Car Ride Alongs
Переглядів 3022 роки тому
700WHP Whipple Coyote Stick Car Ride Alongs
MMR Carbon Fiber Fenders Review
Переглядів 1,4 тис.2 роки тому
MMR Carbon Fiber Fenders Review
Why I Started a Youtube Channel (Whipple S197)
Переглядів 3832 роки тому
Why I Started a UA-cam Channel (Whipple S197)
700HP Big Single Turbo MK4 Supra Ride Along Reactions
Переглядів 1902 роки тому
700HP Big Single Turbo MK4 Supra Ride Along Reactions
MMR Carbon Fiber Front Bumper Update (11-14 Mustang GT)
Переглядів 1322 роки тому
MMR Carbon Fiber Front Bumper Update (11-14 Mustang GT)
MMR Carbon Fiber Bumper Install
Переглядів 982 роки тому
MMR Carbon Fiber Bumper Install
Channel Intro - S197 Gen 5 Whipple Supercharged with Tubular Front End
Переглядів 7402 роки тому
Channel Intro - S197 Gen 5 Whipple Supercharged with Tubular Front End

КОМЕНТАРІ

  • @pablocruz74
    @pablocruz74 2 дні тому

    Nice road king if you wanted to you could change out the windshield to a smaller tinted one if the stock one bugs you ✌🏽😎

    • @vonlipichracing251
      @vonlipichracing251 День тому

      Thanks! That’s a good idea. I’ve definitely considered a taller windshield to help match my height.

  • @spartan2010100
    @spartan2010100 3 дні тому

    Where do you get that kit? Cuz I found one on Amazon, EBay. And they are only for super duty trucks

    • @vonlipichracing251
      @vonlipichracing251 3 дні тому

      latchlid.com/buy-latchlid They are sold on eBay but here is their main page. F150 & F250

  • @Domiano542
    @Domiano542 4 дні тому

    Sorry for your loss but man that’s a stellar mustachè. Lol

  • @adamvondran
    @adamvondran 6 днів тому

    I took the msf course on a 200cc standard Yamaha as a 6'6 guy. Is the weight of that bike hard to balance or just a learning curve?

    • @vonlipichracing251
      @vonlipichracing251 5 днів тому

      Just a learning curve for me. I only ride 2-3 times a month as the car is my main hobby.

  • @klum6047
    @klum6047 6 днів тому

    I think the mini ape handle bars are also an add on. They look taller and thicker than stock at 1-1/4" . The bike is in awesome shape and I love the color. Thanks for sharing.

    • @vonlipichracing251
      @vonlipichracing251 5 днів тому

      Could be right! If I built it myself I would have picked a little taller bars to be closer to my shoulder height but these have been great too. Appreciate the comment!

  • @bricks-mortar
    @bricks-mortar 7 днів тому

    Texas - Lucky, they did not remove all your wheels, leave vehicle on bricks. That happens when you go to movies in Texas.

  • @rescuemepookie5256
    @rescuemepookie5256 8 днів тому

    Sounds amazing.,,turbo quiets everything down...LOL

    • @vonlipichracing251
      @vonlipichracing251 8 днів тому

      It’s wild how quiet the car is for how short the exhaust system is haha turbos for the WIN

  • @Badger_S197
    @Badger_S197 8 днів тому

    Oh dude, this is exactly what i was looking for!

    • @vonlipichracing251
      @vonlipichracing251 8 днів тому

      Hell yeah glad to be of help! Feel free to message me if you have any questions

  • @TheBakedPotato8
    @TheBakedPotato8 9 днів тому

    Day 37 of asking for burn outs

  • @TheBakedPotato8
    @TheBakedPotato8 9 днів тому

    5:15 surprise coming soon? 👀

  • @rickeyb450
    @rickeyb450 10 днів тому

    Wouldn’t hurt to throw a clamp around the tailgate connection as well. I had one on my Gen 2 Raptor. Those tailgates can easily be stolen as well. It won’t stop them from getting it but it is a great deterrent.

    • @vonlipichracing251
      @vonlipichracing251 10 днів тому

      I did think about that just haven’t gotten around to it yet. Crazy how easy it is to steal stuff on these trucks.

  • @ilyamaximov
    @ilyamaximov 10 днів тому

    Great!

  • @kalreacts893
    @kalreacts893 11 днів тому

    great video

  • @zenodio3D
    @zenodio3D 13 днів тому

    Are you Texan by any chance? hah I'm normally not a big Harley fan but this one is beautiful.

    • @vonlipichracing251
      @vonlipichracing251 13 днів тому

      Yessir located in San Antonio!

    • @zenodio3D
      @zenodio3D 13 днів тому

      @@vonlipichracing251 haha I figured, everything screamed Texas in this video 😅 San Antonio seems cool! Never been to the US but Texas is one of the states I'd love to visit, people there seem chill.

  • @rescuemepookie5256
    @rescuemepookie5256 13 днів тому

    Harley Vrod will always be my favorite

  • @Pennebaker1
    @Pennebaker1 14 днів тому

    You’re lucky they didn’t steal the whole truck. Very common nowadays whether the key fob is in it or not

    • @vonlipichracing251
      @vonlipichracing251 14 днів тому

      Sure hope that doesn’t happen but thank God for insurance

  • @That_FN_Coyote_Car
    @That_FN_Coyote_Car 15 днів тому

    Good video dude! Im one of the lucky ones that has a surviving stock MT82 at around 1k hp (crank). I've noticed a pattern with people changing the trans fluid and having failures after. I always recommend that they leave the trans sealed with the OEM fluid - mines untouched. It's just something I felt like adding in here for anyone watching or reading these comments in the future. Im curious to hear how that stage 3 holds up for you. Definitely makes sense going the route you did on a budget. Im pretty confident I'll be going built T56 once this stock MT82 fails. Im sure the day will come as I refuse to proactively change the trans lol I want to push it till it blows lol

    • @vonlipichracing251
      @vonlipichracing251 15 днів тому

      That’s wild man! Glad that yours is holding up! I’m genuinely curious what could cause the unopened mt82s to be more reliable. In theory changing the fluid would help keep it fresh but maybe there’s some secret magic there. My stage 2 did actually break about 100 miles after a fluid change. I’ll definitely update on how the stage 3 mt82 holds up. Gonna put some miles on it and rip it some. Since you race so much it makes a lot of sense to put a T56 in yours. Maybe even a faceplated one?

  • @philfez
    @philfez 15 днів тому

    Great video! Not a lot of people explain when you should consider upgrading the MT82 and what stage they should get! Can’t wait to get my calimer built T56 swap running!

    • @vonlipichracing251
      @vonlipichracing251 15 днів тому

      Thank you! I’ve seen a few videos about Calimer mt82s but they never answered all my questions. Built T56 should be super baller!

  • @pa77ern
    @pa77ern 16 днів тому

    А зачем?

  • @rescuemepookie5256
    @rescuemepookie5256 16 днів тому

    4000 buckaroos.. dammnnn that's a steal Von. God bless on your journey. and nothing wrong been cheap lol.

  • @TheBakedPotato8
    @TheBakedPotato8 16 днів тому

    Day 20 of asking for burnouts

  • @andyali13
    @andyali13 18 днів тому

    Wow! Very nice and clean engine bay setup!

  • @manit77
    @manit77 18 днів тому

    Same thing happened to me. Cost me 5k

  • @spiderskateg
    @spiderskateg 23 дні тому

    Did you ever get the bliss module to work/programmed?

    • @vonlipichracing251
      @vonlipichracing251 23 дні тому

      I haven’t got around to it yet but still planning on doing it soon.

    • @spiderskateg
      @spiderskateg 23 дні тому

      @@vonlipichracing251 I’m trying to get mine programmed but everybody I talk to has no idea what I’m talking about lol

    • @vonlipichracing251
      @vonlipichracing251 23 дні тому

      @spiderskateg even the dealership? Definitely need to reprogram to get them to work with the VIN

    • @spiderskateg
      @spiderskateg 21 день тому

      @@vonlipichracing251 the person I used did it through the dealership and got the programmed. Cost me 950 to get them programmed

  • @russellhartman7716
    @russellhartman7716 29 днів тому

    Is it only the BLIS lights they are stealing? I've been looking at new f250's and if so, I know to avoid the BLIS taillights. I currently have a 21 fx4 stx f150 without BLIS, and it sits outside every night. So far it's been left alone.

    • @vonlipichracing251
      @vonlipichracing251 29 днів тому

      Yes from what I’ve seen so far it’s ford trucks with the BLIS taillights. You can try the anti-theft methods but they aren’t 100% successful. Non-BLIS taillights might just keep you safe.

  • @FloridaCoastalGuy
    @FloridaCoastalGuy Місяць тому

    The tailgate cannot opened by inserting a screwdriver into the round hole in a remote release tailgate; the release handle is in a different lower location from the hole, I know because I tried to open my F-2019 150 Limited tailgate with a flat screwdriver, finally I removed the eight T-25 screws to remove the panel and this found out.

  • @scformula
    @scformula Місяць тому

    Nope bed covers don’t help. They broke out my glass and took my tail lights today in the same area in San Antonio. I was on vacation and got lucky and had a dealership Red McCombs get me on the road back to DFW.

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Damn sorry to hear it. Thought the bed cover would be of help but that’s wild. They’re really getting everyone lately.

  • @tiriqherrera7961
    @tiriqherrera7961 Місяць тому

    Bro this literally happened to me this morning

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Damn I’m sorry to hear it. Get your truck right at grab that anti theft kit. Haven’t had any problems with mine since adding.

  • @petertrznadel8107
    @petertrznadel8107 Місяць тому

    Just so happened to see another video about F-150 tail lights, from Ford tech, he was replacing a water damaged unit that had the proximity sensor. The whole lot came to $5600 including the module, new. At that price no wonder tail light theft is on the increase, the tail gate becomes a bonus for the thief.

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      That is CRAZY expensive for a tail light replacement. Can’t believe this kind of stuff.

  • @AMERICANMODIFIED
    @AMERICANMODIFIED Місяць тому

    Hi, I like your content. Do you accept sponsored products?

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Yes I am interested. Feel free to reach out via email lance.lippig@gmail.com

    • @AMERICANMODIFIED
      @AMERICANMODIFIED Місяць тому

      @@vonlipichracing251 Just sent you an email.

    • @AMERICANMODIFIED
      @AMERICANMODIFIED Місяць тому

      @@vonlipichracing251 Hi, just send an email to you.

    • @AMERICANMODIFIED
      @AMERICANMODIFIED Місяць тому

      @@vonlipichracing251 Hi, we just sent an email to you.

    • @AMERICANMODIFIED
      @AMERICANMODIFIED Місяць тому

      @@vonlipichracing251 Great! Just sent an email to you.

  • @F150EcoBeast
    @F150EcoBeast Місяць тому

    Platinum looks clean 🔥🔥🔥🔥

  • @basketball2731
    @basketball2731 Місяць тому

    Just had this shit happen to me for the second time it’s so annoying man, happened in San Antonio too!

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      TWO TIMES?! Man that sucks! Have you done any of the anti-theft measures?

  • @butterbeans1619
    @butterbeans1619 Місяць тому

    Wow. Its really just two screws. Wow. It might slow them down.

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Yep. Love my ford but they really need to fix this issue from the factory.

  • @jamescross1989
    @jamescross1989 Місяць тому

    Man I knew this was in San Antonio before I even clicked.

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Yeah this city has changed over the years. Gotta be careful out there now

  • @TheBakedPotato8
    @TheBakedPotato8 Місяць тому

    Day 50 of asking for burn out

  • @rescuemepookie5256
    @rescuemepookie5256 Місяць тому

    Nice Rig Von! all you need is hellion twin turbos kit that mounts hidden under the truck. 😈😈

  • @robert-anthonyvasquez9632
    @robert-anthonyvasquez9632 Місяць тому

    Great vid sweet truck but it be a real shame if dem tail lights whent missin

  • @juniorramos9878
    @juniorramos9878 Місяць тому

    What did you with the abs plug ?

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      I’m not sure what you’re asking here.

    • @juniorramos9878
      @juniorramos9878 Місяць тому

      @@vonlipichracing251 the conector that plugs into the abs module. Did you just tuck it away ?

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Yes it’s tucked under the driver headlight. Could pull out all the wiring but it’s a LOT of work. Brendan Milteer did it on his and he has a video on it as well.

    • @That_FN_Coyote_Car
      @That_FN_Coyote_Car Місяць тому

      Good video. I'm sure at some point I'll also delete my abs module 👍

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Thanks boss! I’m happy to share content like this. I remember looking for how to videos for S197 and couldn’t find much past FBO stuff

  • @TheBakedPotato8
    @TheBakedPotato8 Місяць тому

    🗣DO A BURNOUT 🗣

  • @NGFADED
    @NGFADED Місяць тому

    Literally happened to me today in San Antonio as well on 281 and 1604 at the Saltgrass steakhouse

    • @spiderskateg
      @spiderskateg Місяць тому

      Me too just down the street, at a motel 6. Fuckin bastards

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Sorry to hear it. Seems like a big trend right now and it’s getting everyone.

    • @metalbeast83
      @metalbeast83 Місяць тому

      was probably the same garbage trolls that took the lights out of my wife's ranger about 2 weeks ago, was at a big hotel in San Antonio right under the security lights.

  • @spiderskateg
    @spiderskateg Місяць тому

    With them being aftermarket do the sensors and everything work?

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      I haven’t put the sensors back in yet but the manufacturer says it will. Recoding them to work properly will be the hard part.

    • @spiderskateg
      @spiderskateg Місяць тому

      @@vonlipichracing251 so right now you’re just rolling around with the taillight but no blis module? Sorry for being a pest and seem to be repeating myself

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      @spiderskateg correct. Tail lights and turn signals work just don’t have the blind spot light working at the moment. No worries! Happy to help.

  • @spiderskateg
    @spiderskateg Місяць тому

    My shit just got stolen outside of my hotel, ford dealership quoted me at 5000 🤦🏽‍♂️

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Sorry to hear it. And WOW. That quote is so expensive

  • @FordGuy20111
    @FordGuy20111 Місяць тому

    My grandpas ranger has those blind sensor lights told him to be careful , it’s crazy how people don’t care , hope they control this

  • @harrisonclark4382
    @harrisonclark4382 Місяць тому

    Thinking about doing the same thing with my car. I have a sleeved Coyote with a VMP G3 on it. T56 Magnum street car. Did traction improve considerably? Thanks!

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Sounds like a great build! Traction improvement was not drastic with the battery relocation alone. I mainly moved it for space in the engine bay. Also if you do this just make sure and get a better tray than the one in this video. Recent video has the updated one I got.

    • @harrisonclark4382
      @harrisonclark4382 Місяць тому

      @@vonlipichracing251 excellent. Thanks for getting back to me.

  • @harrisonclark4382
    @harrisonclark4382 Місяць тому

    Great video. Thanks!

  • @harrisonclark4382
    @harrisonclark4382 Місяць тому

    Car is too nice to drive.

  • @ismaelcontreras2895
    @ismaelcontreras2895 Місяць тому

    I had this happen to me and i had a bed cover on my f150

    • @vonlipichracing251
      @vonlipichracing251 Місяць тому

      Man that’s really rough. Seems like nothing is the perfect fix, if they really want it and spend the time they’ll get it.

  • @Playhard31210
    @Playhard31210 2 місяці тому

    You’re surprised cause it happened in a nice neighborhood on a nice side of town😂😂

    • @vonlipichracing251
      @vonlipichracing251 2 місяці тому

      Guess I should just go to the hood all the time eh

    • @Playhard31210
      @Playhard31210 2 місяці тому

      My point exactly you can be in a nice neighborhood where there’s nice stores and still get your shit stolen, sir 😂

  • @Vultite
    @Vultite 2 місяці тому

    Any rattles after installation?

    • @vonlipichracing251
      @vonlipichracing251 2 місяці тому

      Not at all. New tails have been perfect. No issues at all after driving with them for a few weeks.

  • @hellostranger2269
    @hellostranger2269 2 місяці тому

    Who made your headlights?