Відео

This is 1 of the best LP videos with info and demo i have seen! R u still active? I just subscribed

Is it able to hold more than 2 keys ?

Everywrites it is working is it only me or my lock is not responding as is?😢

I made it. thank you

Property owner used house address number to open the safe. Fifteen second solution.

What if i have a 5 digit code? And where are we supposed to feel the feeback? On the down arrow button or on the actual number buttons?

I believe that this method was working for the lock I had given to me as part of a tool lot but it still wouldn’t open. My model was the wall mount version so I finally just drilled into the back in the top and bottom and could see that the buttons I had guessed were activated were the right ones. I was able to turn them around get it open to discover I have 4 buttons that will not function. What crappy locks. Oh well. I was fine drilling the holes in this one since it’s getting mounted with screws but good luck to anyone having a functional one for long that hangs on knobs

Nice video instruction. My wall safe 'spat the dummy', and springs and things went everywhere. Found all the bits from the cylinder etc but was a bit baffled. It had a cam fitting with screws which had come loose. It is now all back together and working just fine. Magic. Thank you so much for sharing. Cheers from New Zealand.

TRADUIR EN FRANCAIS SVP

Digital meaning it has digits. Which it has🙄 So they're right

Don’t waist your money on this piece of Shit, it doesn’t even open

thank you I opened it easy the real state refused to take the lock after I bought the house try those Botton the one resist and feel hard

Ty!!! Did the trick. Helped me to reaffirm the correct code. It wouldn't open because one of the button mechanisms we turned on was malfunctioning out of the box. After struggling a bit, we got it open and turned the malfunctioning one to off. New code works great. A bit unnerving how easy it was to decode with this method. 😮 Will have to reassess our locking protocol.

Dumb question, but why is it 6/32 instead of 3/16?

It worked well. Only took me two tries to get it done. I did not use any tool other than my two hands. I used two index fingers to press the top and bottom buttons down, then used my thumb to feel the feedback / tighten numbers. I located the four tighten buttons quickly. It worked great. Thank you so much! ❤

Doesn't seem to work. For comparison, I tried it on a lockbox that I did know the code and it also didn't work

Casse toi

It worked! Thank you so much for the info.

Great video to show me how this lock can work. Just looking to have one for a spare key. But not sure if you recommend this lock or not? Since it wasn’t decodable by “easier” means. Thanks!

Thanks for this! I just decoded mine and it would only work on the right-hand side also. Too sticky and jamming on the left side of the combo wheels. Important note I would add is once you find the 'bumps' for the right numbers, try move the whole 3-digit set either side of that until it unlocks because it can be a little unclear which number the 'bumps' correspond to

Worked perfectly! You’re the MAN!!! People, listen to the instructions carefully…… the buttons with the most resistance are the ones to crack the code, not those that suppress easily. I learned the hard way !

Bullshit I didn’t give feedback at all

Are there any key lock boxes that you would recommend or at least rate much higher than this for securing keys?

0:46 You are doing it incorrectly. Start by clearing it, then pressing the 1st three buttons on the top row, then put your pressure on the lever, then press each of the 3 bottoms in the top row again and if any have free range of motion that is one of the codes. Do that for each row.

How to reset the code?

Totally worked thanks I will be sending this back

Boom! Worked like a charm. Thanks for the helpful info.

What about if I don't have the combination, my son totally forgot

I tried this method with a wall mounted one. I'm having difficulty. Decoding it. Any tips?

I just bought this lock (5422D). Thought I had my combination in, and locked it up. Well, guess what! Apparently I didn't do something right and I can't get it open. So, this will be a 50 dollar lost if I can't get it open. This is for the EMT's to get to me at case of an emergency. So, hopefully this will work. Still trying though, because I do not want to spend more money.

Thank You so much for the help!!!!! It worked great!!

Ok. This was perfect. After hearing the method, I was able to find out the combo on this lock before the video even finished. Now I don't need to go buy a new one. Probably should with how easy that was, but it's for work. Not my problem.

I worked! Thanks!

Get Patrick I just wanted to let you know I tried your method last night, and it worked. It wasn't easy and I needed 3 hands and a thin knife to let it open but going through your steps definitely made it possible. Thanks for your channel.

Man I have a problem,, for some reason all my numbers seem stuck, I take the key inside got loose and it's jammed. I'm going to try this method. Thanks

Hello! I have a few Masterlock TSA 002 locks whose combo.s I do not know. They were not locked and the shackles did not depress. I tested numbers by feel and was able to guess and push 2 of them, in the 90 degree position, deeper. I noted the numbers, moved the shackle above the lock position, changed the numbers and they do not depress and engage. When I have it in the 90 degree position and fully depressed they do not turn to 180 (should they?). And now 1 of them no longer responds to that discovered combo. Help? Thankyou!

Legit!....was having trouble with new ML 175....your video explained how to go about it perfectly....thumbs up, subbed.👍

Sweet! This method worked for me. It worked really well, I opened it within 15 seconds after I put the tension wrench in place. Also, I hit the Like button and I also Subscribed. Well done!

Good tutorial 👍

I have one of these lock cases that I've forgotten the passcode to. I don't have any lockpicks and am wondering if there's a substitute tool I can use? Or maybe you can recommend an inexpensive tool? I know $20 isn't much, but I hate to spend that on something I'll only use once. I appreciate any assistance you can give me!

Please help, i can't feel any difference when I stick mental inbetween the dials. It's stuck on my door

Thank you. I know there's this comment under every lock opening video, but I tried two other, more popular videos first, and this was the only one that actually works. Thank you again, and big ups to that tension wrench guy!

that is absolutely ridiculous didn't even need the tension wrench just held tension on both at the same time. got in mine within 5 mins. any stiff buttons are part of the combo.

please make a video how to reset the combination lock

How is your channel not more popular? Great video!

Finally some explanation THANK YOU

If all else fails, just try the default code of 000

Help the cylinder will not turn after I rekeyed with new one

👍🏻