Відео

ali baba sword vs Kirpan

Yes it is peened just not as a European sword is It is peened sideways, I have one arriving this week, great review thanks🙏

Loose dust cover is because they did not press the gas block on far enough to take the slack out

Installing the full auto rate reducer removes trigger slap. I prefer a surplus trigger now that I learned this

Where do you find the tapco mags? I can't find any.

Rapier with flat blades can do cuts but they're not your typical cutting off arms/hands cuts, they're meant to do a cut to the face or arteries when opportunities show up which are still devastating. It looked like you were using too much blade to cut, try using 1-3 inches worth focusing with the tip, you'd be surprised with how well they can cut

I've been watching for 8 time and i just realized it a loop..... 😂😂😂

So who is the “best” sword maker?

gorgeous

Love it

Bought my spear lt for $2500, i did have to tighten the barrel screws, I have an Acog on a unity mount and sighted with an offset RMR along with the Acog. I sighted with some .55gr PMC ammo $0.45 a round around $9 for a box of 20 and $480 for 1000 rounds. Id say thats cheap, with the RMR I was stacking shots at 25 yards, grouping was about .25”-35”. with the Acog at 100 yards I was hitting sub 2 MOA with my best consistent group being 1.5 MOA and worst group being 1.76 MOA. Its sad to see such a great weapon not being made to spec for the price, im lucky nothing is wrong with mine. Hopefully sig fixed the issue asap, theyll most likely just replace the whole barrel and piston system for you

This looks like a broadword or also called "Dao"

I find this pretty bizzare. I have a 16'' Spear LT as well, I did a group at 100 yards with cheap PMC bronze ammo, $8.99 for a box of 20. I sighted after only 20 rounds with a TA31 4x ACOG (Chevron reticle) <-which is not the most accurate scope, I was hitting sub a sub 2 MOA group, (1.38 MOA to be exact -1.3'' group-) I just hand tightened the barrel and it barely moves now. Ive been able to hit human sized targets up to 500 yards pretty consistently as well.

Hot damn…

Dude, barely above hand tight for the handguard screws? For 3200 bucks, that's an insult.

Love my Sig Virtus

A quick note/correction on a few things I said in here... 1.) The handguard needs to be adjusted to 45lbs per the manual (I say 40lbs in the video). 2.) When I said "the most expensive by far" I meant compared to the other piston guns I had out the same day as the Spear-LT (I cut about 20 minutes of talk about the other guns I had out since it was too disjointed and unfocused). 3.) I actually had a couple of 4.5" groups with match ammo, but most were exactly 3". 4.) The other handguard screw head stripped out immediately after I finished recording this before I got to 45lbs, so I'll be needing to aquire replacements. 5.) This is easily the worst video I've ever recorded, but I learned a lot for next time and I thought the info might be too useful to scrap it entirely.

The gun is probably overgassed if it is recoiling very heavy and had bad trigger slap. The rear sight wobbling would drive me bananas, you could check the accuracy again by wrapping the dust cover ears and sides of the receiver with electric tape, but I don't recommend running that very long.

Very nice review and comparison. Good length for a review video as well. Watching on my laptop, the sound quality was fine. It's really nice having the opportunity to see someone handle these blades and give an unbiased opinion on swords that have been purchased (i.e. not sent the best one out of the batch for a paid review).

I bought the JRA ARM kit build off classic for like $999 thing is a lead dispenser. My trigger is super worn in so it’s pretty smooth, no trigger slap or loose dust cover. Also installed a KNS piston plus a SAR handguard no bipod lol

I only own 4 European style swords. One of them is the RK Euro model #7. I'm very happy with it. It's one of my favorite swords considering value for dollars. The one I recieved is particularly nice on the QC end and it looks great, to me. I've been incredibly lucky with most of my Ronin Katana purchases. They're not perfect, but for the price I think they're top-notch.

I do a lot of "backyard thrusting" if you know what I mean. 😂

I have two Galils made from kits and both had loose dust covers. Luckily Apex gun parts still has Galil dust covers in stock and both were tight fits.

have you considered hafting the socket handle of the Thai machete on to a wooden handle to make it a glaive?

Stock wobble is messing with my old just watching it makes me want to fix it

If trihawk I think you sold me on that instead of an lpvo

Is that a blade or trihawk?

MIss you on Mishaco dude - what happened?

Wish they'd hurry up with the doe clone....😤

Please, tell us more how you got the ALG akt Trigger Group and Fcg Retaining plate to fit.

Thanks for the review! The Cold Steel Italian and MMA Italian go for 360-400 Euros here. The Ronin Euro 7 i can get scratch and dent for $165 plus max $100 for shipping and customs to Germany. I heard only good about the Euro swords of Ronin Katana. Guess i'll go for it before the scratch and dents are sold out.

للعلم الشتاير او استير اجمل بكثير من الكلوك مع انه الكلوك اشهر واثنينهن صنع النمسا

Real nice video.

I very recently got a Vindaaris from DSA. I ordered it from the SBG store to get it sharp without the usual fee. While I was expecting 6-8 weeks for shipment, it was ready in 1. My box was stuffed tightly with packing paper enough to prevent any movement at all within. To my surprise, they added the belt system as well even though I didn't actually order it. Sucks your initial shipment experience was like that, but it's good they put the effort in to take care of you in the aftermath of it.

How’s the kick?

This sucked to get gold in bo2

I dont know why i would ever need this. where can i get one.

They need this in Halo.

Good vid, Jay. Thanks for sharing. My stock, dust cover, foregrip were not that loose, but I also had WICKED trigger slap with mine - and some serious extraction issues as well. I ended up custom-fitting a RAK-1 (which turned out great) - but also installed a KNS Piston (because it was over-gassed AF), polished the (rough) chamber, replaced the extractor spring and threw in a buffer. Now it runs like a sewing machine. This is a good vid to advise folks that this rifle might not be the best for someone who isn't ready to start tinkering a bit to get it to run right/or even be shootable.

Are we not going to talk about it doubling or going full auto on like round 6 or 7 of the video?😂

Nice review .You could try a Wolff extra power AK recoil spring and a buffer. May settle some issues.

I had the same trigger slap with my southern tactical galil. Also the hammer axis pin would not seat fully which meant the retaining clip could not drop into place. Your rifle also looks miles better than mine, mine came pretty rusty and beat. I also did not get the nice atlantic firearms bag. Would not recommend.

It's an amazing pistol. The engineering and craftsmanship is amazing. Thank you for sharing your video.🙏

Great review, sorry about the trigger slap.

Still love it,they are still available. 2/5/24

For me as a former infantryman, the Galil is an improved AK platform. I would chose the M16 series where the sights on the receiver is solid and aligned with the barrel for a maximum of 300-250 meters especially on the M16A1. Israeli soldiers are not stupid and have been using M16A1s since after the 1973 Yom Kippur combat action especially their infantry.

It takes me like 5 minutes to put my dust cover back on, yours may be a little to “battle worn “

I like grounding welds

Hillbilly Firearms has a video on adjusting a loose dust cover. As with many AK fixes, it involves a hammer. ua-cam.com/video/TLajTCVNvmo/v-deo.htmlsi=AmuCs02w670jx2Np

So it's a BLEM😮...