Ken James
Ken James
  • 43
  • 385 340
Ballarat NNL 2024
26th Ballarat NNL Model Show 2024
Переглядів: 142

Відео

NIGHT SKIES NETWORK - Broadcast 3rd March 2022 - Snake Valley, Australia
Переглядів 3052 роки тому
World Time Zones make it hard to broadcast the night sky Live to viewers around the world, so I have recorded this session so it can be watched any time by anyone. Broadcast Live on Night Skies Network and recorded from Snake Valley Observatory, Australia, 3rd March 2022.
Jakes Golden Find
Переглядів 5072 роки тому
My son Jake was out detecting today as he usually is, but today he found a screamer!!! Here he is cracking the rock open to find the hidden gold.
Muzz's Muncher on Steroids
Переглядів 5262 роки тому
Using the 12.5 inch Muzz's Muncher to crush Quartz to powder, and run it through the Highbanker directly underneath the Crusher. Water is added to the rocks as they enter the top of the crusher by a small 12 volt Bilge Pump to keep dust down and to pre-wet the crushed rock before entering the Highbanker. The material used was simply loose quartz laying around in the bush, not from any specific ...
Camper Build, a Mobile Tiny House
Переглядів 3042 роки тому
Tired of camping in a Tent when you go camping, prospecting, hunting etc? I am, so I built myself a little camper. In this Video I show how I built it and then go away in it. It is possible to even live in it! The trailer is 7'x4' and the slide-on camper is 8'x4' at the base and widens out to 8'x6' above the trailer. The height of the slide-on camper with roof lowered is 5 feet, consisting of 1...
Modifications to Josh's Highbanker
Переглядів 4593 роки тому
A few simple easy-to-do mods to Josh's 'Aussie Gold Dog' Highbanker to help it trap more gold and to do quick sampling with the quick removal top mat. Mods are: Miners Moss mat in the top hopper and punch plate lowered onto it to help as a clay breaker surface, Grizzly punch plate lowered to assist rock removal, Miners Moss mat used as a Crash Pad in lower section, and a Reverse Riffle (rocks u...
Highbanking for Gold in Lockdown
Переглядів 1,2 тис.4 роки тому
We finally got to do some Highbanking for Gold during the current Covid-19 Lockdown. This is on my own property in western Victoria, Australia. Equipment: - Gold Rat 12" Outback Pioneer series Highbanker, - Minelab Gold Monster 1000
Laanecoorie Gold Bash 2019
Переглядів 8664 роки тому
Laanecoorie Gold Bash 2019 Where Prospectors get together for 3 days, have fun, and raise money for the Peter Mac Cancer Foundation. See you there in 2020
Kayla Prospecting
Переглядів 3654 роки тому
My 17 month old Granddaughter Kayla Rose loves going prospecting with her Daddy and me, Here she is helping her Daddy.
Gold Rat Highbanker Modifications
Переглядів 29 тис.5 років тому
Some simple modifications I made to my 12 inch Gold Rat Highbanker. - Clay Claw - Spray Bar (1.5" Plumbing) - Crash Pad - Bubble and turbulence reducing flap - Big Rock as a reverse riffle All these work very well and have vastly increased my Gold capture results. Thanks are given to particular people at the end of the video. You can see me using this highbanker in terribly muddy conditions her...
My Gold Rat 12 inch Highbanker modifications
Переглядів 2,5 тис.5 років тому
I added a Clay Claw and Spray Bar setup to my 12" Gold Rat Highbanker. The concept of the Spray bar comes from You Tuber 'Goldluck Victoria'. I have also recently added a Reverse Riffle in the lower Crash Zone. The reverse riffle is a large rock and it works great. Simple and effective.
'Prospecting Supplies Australia' Eldorado 2 tier Highbanker
Переглядів 18 тис.6 років тому
We are giving Robert's new little Highbanker its first run. The Highbanker is from 'Prospecting Supplies Australia' www.prospectingsupplies.com.au/products/152-eldorado-2-tier-sluice-austmade.aspx We were pleased with the ease of use of this little unit, and the Gold results were quite good. The location is an old Mining hole in the Golden Triangle, Victoria, Australia. It is the first time any...
Gold Rocker Box and saving gold losses
Переглядів 3,2 тис.6 років тому
In this video I show how I set up my Rocker Box with a Gold Pan at the bottom to catch any gold that makes its way through the Rocker Box and would normally be lost back to the creek. It wasn't a very productive day because the cold wind cut our time shorter than usual. But it was still fun being out there. Location: The Victorian Goldfields, Australia Visit: www.prospectingaustralia.com.au/for...
Finding good Gold in a Home Made Rocker Box
Переглядів 6806 років тому
A quick look at the results from the second attempt at using my homemade Rocker Box. 9th April 2018, somewhere in Western Victoria, Australia. Visit: www.prospectingaustralia.com.au/forum/
Wedderburn Detector Jamboree 2018
Переглядів 7516 років тому
A quick look around the Wedderburn Detector Jamboree & Token Hunt 2018 Visit: www.prospectingaustralia.com.au/forum/
Rocker Box with a Water Pump
Переглядів 2,6 тис.6 років тому
Rocker Box with a Water Pump
Revolution Imager IMX 224 Imaging Camera
Переглядів 10 тис.7 років тому
Revolution Imager IMX 224 Imaging Camera
Roll-Away Observatory Locking System
Переглядів 9978 років тому
Roll-Away Observatory Locking System
OBSERVATORY TEST 1
Переглядів 4308 років тому
OBSERVATORY TEST 1
Revolution Imager Live Views part 2
Переглядів 17 тис.8 років тому
Revolution Imager Live Views part 2
MILOSLICK HDR LIVE STACKING
Переглядів 1,4 тис.8 років тому
MILOSLICK HDR LIVE STACKING
Mallincam Micro and Revolution Imager OSD
Переглядів 12 тис.8 років тому
Mallincam Micro and Revolution Imager OSD
Revolution Imager Live Views
Переглядів 24 тис.8 років тому
Revolution Imager Live Views
Revolution Video Astronomy Kit - Product Review
Переглядів 22 тис.8 років тому
Revolution Video Astronomy Kit - Product Review
Harley Evo - Cam Oil Seal Replacement (1080p HD)
Переглядів 42 тис.9 років тому
Harley Evo - Cam Oil Seal Replacement (1080p HD)
3SIXT HD SPORTS ACTION CAM TEST
Переглядів 16 тис.10 років тому
3SIXT HD SPORTS ACTION CAM TEST
Make your own Focal Reducer
Переглядів 59 тис.10 років тому
Make your own Focal Reducer
Bond Homes
Переглядів 19 тис.10 років тому
Bond Homes
Australian Harley Riders
Переглядів 34211 років тому
Australian Harley Riders
'Live' Video Astronomy with Samsung SCC-A2333
Переглядів 41 тис.13 років тому
'Live' Video Astronomy with Samsung SCC-A2333

КОМЕНТАРІ

  • @BigTasty_615
    @BigTasty_615 День тому

    I know it’s an old video and not sure if you’re on here still but I am gonna tackle this today on my 93 FLSTC. Might be a dumb question but do I need to drain the oil before doing this? Didn’t seem like you did since you put it back together and fired it up and never mentioned draining.

  • @itzredrum3322
    @itzredrum3322 Місяць тому

    Do you have a part number for the seal?

    • @Ken_James_SV
      @Ken_James_SV Місяць тому

      You will probably find that it is Part Number 83162-51 Camshaft Oil Seal for HD 1970-98

  • @Miss-moo
    @Miss-moo 2 місяці тому

    Love the LAMBorgini well done Geoff Gracie.

  • @nathanmilburg9633
    @nathanmilburg9633 5 місяців тому

    Thanks for the widsom! 🤘🫡ride safe!

  • @loganmcginn8368
    @loganmcginn8368 6 місяців тому

    Love the sluice buddy, building mine right know and im modeling it verry simillar to yours,cheers🍻

  • @richarddeliu8590
    @richarddeliu8590 8 місяців тому

    Thanks Ken very helpful

  • @mtscott1
    @mtscott1 10 місяців тому

    Thanks for posting

  • @Indobiker61
    @Indobiker61 10 місяців тому

    Thans Ken...i think i need to do this job. Just bought a FXR evo from 1990. Just degreased the engine and went for a test ride. I discovered the leak its comming from the nose cone.

    • @Ken_James_SV
      @Ken_James_SV 10 місяців тому

      Cheers Indo. If it's a very minor leak you'll be OK for a few hundred miles before it makes a huge mess or the oil level gets a bit too low. But best to fix it as soon as possible. Glad to help 👍

    • @Indobiker61
      @Indobiker61 10 місяців тому

      @@Ken_James_SV If i don't fix it the engine will be covered in oil. Making a big mess on my back yard and upsetting my wife lol.

    • @Ken_James_SV
      @Ken_James_SV 10 місяців тому

      @@Indobiker61 - Sounds like you need to do it right now!

    • @Indobiker61
      @Indobiker61 10 місяців тому

      I got parts today but the seal had to be ordered..

  • @Blazinupytb
    @Blazinupytb 11 місяців тому

    Hi mate where do I get the clay breaker from for the box cheers

    • @Ken_James_SV
      @Ken_James_SV 11 місяців тому

      You have to make it yourself, or get someone with a welder to make it for you. They aren't commercially available.

    • @Blazinupytb
      @Blazinupytb 11 місяців тому

      @@Ken_James_SV too easy I’m happy to weld it. What flat steel Do I need and bars like urs

    • @Ken_James_SV
      @Ken_James_SV 11 місяців тому

      @@Blazinupytb - I used 20mm x 3mm flat mild steel for the frame and 1/4 inch mild steel round for the bars. To get the shape right I made a cardboard mock-up of the frame first, and when I was happy with the shape I bent the flat steel bar to match. Good luck with it 👍

    • @Blazinupytb
      @Blazinupytb 11 місяців тому

      @@Ken_James_SV thanks mate

  • @haroldishoy2113
    @haroldishoy2113 Рік тому

    Good show and a good kit. The Clay Claw would have some good use in certain areas. Heavy pans!

  • @Ked778
    @Ked778 Рік тому

    Sorry if this is a dumb question, but can we keep the lenses in front of the camera lens to do the same?

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      No, a Focal reducer has to go BETWEEN a lens (usually a Telescope) and the Camera.

  • @seanfritz-joseph8712
    @seanfritz-joseph8712 Рік тому

    Does this apply to early model sportsters… 91 for instance.

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      Sorry Sean but I'm not familiar with Sportsters, only Big Twins. Pop the timing cover off and have a look. If you can see the seal under the timing plate you should be able to remove it.

  • @HinchoRacing
    @HinchoRacing Рік тому

    Great video my friend u got a sub here thank u

  • @AstroRef68
    @AstroRef68 Рік тому

    I have the revolution 2 I’m not sure if it does the same thing. But for bright planets astrovid planetcam blows a way revolution 2

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      You will find that the Revolution 2 and the Astrovid Planet Cam share the same internal hardware. Check the specs.👍

    • @AstroRef68
      @AstroRef68 Рік тому

      @@Ken_James_SV Ohh looks like I just don’t know to use revolution better I was comparing on the moon only If I don’t get to sale the revolution 2 I might try to use it I have a lot to learn from your video Thanks

  • @myplace357
    @myplace357 Рік тому

    Hey Ken good job are the good for working at home

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      Thanks Glenn. Back out bush again now but with a Minelab GPX6000. All Highbanking is done at home.

  • @gregoryjohnson383
    @gregoryjohnson383 Рік тому

    Thanks for the neat video. I like the rocker box deal.

  • @sari6929
    @sari6929 Рік тому

    Great job sir.The only thing i wanted to know what should be the length of frontal legs(smaller) from the ground????and similar the back legs length near crash????i guess proper slope plays a huge role capturing gold.similarly tell me what should be the length of legs of the feeding box???from the ground

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      Hi Sarwar, the legs can be any length you want. They are adjustable so you can set the sluice at your desired angle on sloping or flat ground. Many people set their sluice angle around 9 - 12 degrees, but I like mine at about 5 degrees. The top box angle depends on what you are feeding into it. Clay soils need a lower angle on the top box to give the clay material more time to break down. Sandy or gravelly material can be at a steep angle to clear the top box faster. The leg lengths don't really matter. I've seen people sit the unit on sloping ground with no legs.

    • @sari6929
      @sari6929 Рік тому

      @@Ken_James_SV appreciated sir,may be you have a sluice angle setter digital apparatus??? I don't have .therefore setting your sluice at 5 degree kindly measure for me both the frontal and legs near near the crash from the ground. These measurements will determine my 5 degree slope.

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      @@sari6929 I use a levelling App on my phone. 😅

    • @sari6929
      @sari6929 Рік тому

      @@Ken_James_SV 😂😂ok sir

  • @user-mj3ni9jj3m
    @user-mj3ni9jj3m Рік тому

    Бродягам с Урала огромный привет!!!🔥💪😁

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      Здравствуйте, спасибо за ваше сообщение 😀👍

    • @user-mj3ni9jj3m
      @user-mj3ni9jj3m Рік тому

      @@Ken_James_SV Спасибо! Класс ! Удачи, здоровья, любви!🔥🖐️

  • @mohammednovalija
    @mohammednovalija Рік тому

    What makes this a " two tier " highbanker as distinct from a normal everyday highbanker ? I'm not spotting the difference - please help

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      I have no idea but if you go to the manufacturers website you will see that is what he calls it. His company website is Prospecting Supplies Australia. As far as I am concerned it's a normal highbanker, but if he wants to call it by another name, that's his thing.

    • @mohammednovalija
      @mohammednovalija Рік тому

      @@Ken_James_SV sweet - I would have thought tier meant like rise in height. That's my next modification to my sluice

  • @bkrafter
    @bkrafter Рік тому

    Thank you for the video, I really enjoyed your bloopers :D Love the rocker box. I think someone here in the States has plans to build one. I would like to try it. Your video made me chuckle so I subscribed. Have a great prospecting day!

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      Thanks for the sub. Many people build rocker boxes because they work well 👍 Glad you enjoyed the video 😀

  • @todaysaussieadventure
    @todaysaussieadventure Рік тому

    Your doing it wrong 😂 only wrong thing is I’m not down there with you and you supplying me the special sauce 😊

  • @todaysaussieadventure
    @todaysaussieadventure Рік тому

    That’s awesome Ken your a man of many talents I remember you building your observatory, this one your ready for the zombie apocalypse 😂 Karen is very impressed as am I 👍👍👍

  • @BacGold
    @BacGold Рік тому

    Muito bom bonito de mais 💯👏👏🤝👍

  • @iamshredder3587
    @iamshredder3587 Рік тому

    Cool. Not bad spot. I think I've got the same highbanker. And I like it. Works well for me anyway. I normally just hose the miners moss out first while it's still in the hb and let it flow down into a bucket. (Then usually take it out at the end for a final quick rinse and get underneath) Idk if it's the best or proper method haha but I find it easier. Good luck. 👍

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      Cheers Shredder. Do what works for you 👍

  • @StoneyCreekSparkchaser
    @StoneyCreekSparkchaser Рік тому

    Wow! That’s awesome! I’ll take a piece :) great video my guy. New sub for sure!

    • @Ken_James_SV
      @Ken_James_SV Рік тому

      Yeah, I wouldn't mind a few like it 😄 Thanks for the sub 👍

  • @AliDeshi
    @AliDeshi Рік тому

    New subscriber My my dear respected friend full support and Big likes from Ahmed Ali Nizamani 💕

  • @PetesGoldAdventures
    @PetesGoldAdventures 2 роки тому

    Hi Ken, The highbanker is working well, looks like if Jacob changes the angle it will flow better, all come with experience I guess. Subbed to your channel, I'll keep an eye out for your next video. Cheers, Pete

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Thanks Pete, I appreciate your input 👍

  • @miertjestoer9525
    @miertjestoer9525 2 роки тому

    Hi. I think it's a nice one for beginners and easy to use? Is it also suitable to use with a solar telescope like the Lunt 40 mm ? - ideal for simple liveview shots? Thanks for the tip!

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Yes, I know people who use these cameras with Solar scopes like the Lunt. I have used mine on the Sun using a Glass White light Solar filter.

  • @260grew
    @260grew 2 роки тому

    An awesome job Ken, now let's see the plans

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Thanks Terry. LOL!!! There are no plans. I built it by visualising it in my head, and designed it as I went along. I have a habit of building things that way. Never with plans.

  • @260grew
    @260grew 2 роки тому

    An enjoyable video esp. the bloopers.....from Nova Scotia Canada

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Thanks Terry. Yeah, I still laugh at the bloopers myself LOL!!!

  • @Doc314
    @Doc314 2 роки тому

    G'day Ken. I know I've missed heaps of fines while sluicing in a little creek off the beaten track. Gritty blue clay, like glue with small gold in it that would just roll out the sluice in little balls....even after some intensive classifying. I've just purchased the 12" Gold Rat because of your video, I am confident after doing your modifications my return will be much higher. Your a legend mate ! There's already folks out there posting you-tube videos claiming the mods as there own. Thanks again and happy hunting brother

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Thank you Paul. You will really enjoy using the Gold Rat. I believe whoever designs a modification deserves the credit. That's why I credit them at the end as they deserve it. I just pass along their ideas 😆👍

  • @aquatashi
    @aquatashi 2 роки тому

    what settings do you have it on?

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Sorry, I can't honestly remember. I don't have this unit any more.

  • @martinsimko5308
    @martinsimko5308 2 роки тому

    Great video! Thank you for your efforts.

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Cheers Martin, I hope it helps you.

  • @pauls133
    @pauls133 2 роки тому

    This camera is not HD. The sensor array is 720x 576p. So it is 576p which is not HD. The output from the camera is analog video in the PAL format. Aspect ratio 4x3.

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Yep, you are correct. It's not HD. My mistake. The company website mentions their HD Hand controller to help operate the camera. I have accidentally added the 'HD' to the Camera specs, not the accessories specs. I have corrected it in the description.

  • @mohammednovalija
    @mohammednovalija 2 роки тому

    I thought this tape interesting ua-cam.com/video/mya2cMDACKg/v-deo.html

  • @miloradskibanovic7163
    @miloradskibanovic7163 2 роки тому

    SUPER ....... MAY FREND (724)

  • @ChasingGoldAustralia
    @ChasingGoldAustralia 2 роки тому

    Really enjoyed watching it ken 🇦🇺🤠⛏️

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Thanks Josh 😄 This is what I do when not out bush 😁

  • @wanhargoldprospecting2036
    @wanhargoldprospecting2036 2 роки тому

    Very nice work and good shiny with lovely setup thanks for sharing.Just sub take care

  • @markrobson948
    @markrobson948 2 роки тому

    Great video Ken, we met Jacob about a month ago. He's a great bloke , you should be very proud!

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Thank you Mark, I certainly am! 😃

  • @shaneozgoldrush.4549
    @shaneozgoldrush.4549 2 роки тому

    Awesome buddy bet that put a smile on the dial Happy Hunting 👍😎🇦🇺

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Sure did Shane 😄👍

    • @shaneozgoldrush.4549
      @shaneozgoldrush.4549 2 роки тому

      Just hit you with a sub 970 👍😎🇦🇺 Happy Hunting Fellas

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      @@shaneozgoldrush.4549 - Thanks Shane, cheers mate. Ken

  • @newbee1016
    @newbee1016 2 роки тому

    Well done Jake, nice little nugget. Ken put longer handles on that dolly pot, I would hate to see Jake or you for that matter smash his fingers with that piece of rod like I did, and it is still not right and that was months ago, damaged a nerve I think. Cheers Rob

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Thanks Rob, he had handles on it but he cut them off! Kids! what can you do with them? 🤣

    • @newbee1016
      @newbee1016 2 роки тому

      @@Ken_James_SV Weld them back on haha. I was holding my pot like Jake was with fingers around the top, brought the rod down and practically sheared the top off my finger.

  • @bedrockbennett1827
    @bedrockbennett1827 2 роки тому

    Recheck All that Rock with your detector and pan out all of it crush it up fine and pan the material there will be more gold

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      He does Bennett. Jake will be running it through his Muzz's Muncher rock crusher and through his clean up sluice. He does this regularly and it will be added to the pile of other rocks to crush if he doesn't get it done later today 👍

  • @highlandgoldfever4440
    @highlandgoldfever4440 2 роки тому

    Thats some high grade material you found! Great detecting. Keep up the good work

  • @Goldandtravel
    @Goldandtravel 2 роки тому

    Nice work Jacob 👌

  • @GSProspecting
    @GSProspecting 2 роки тому

    Great job all around fam. Gold squad out!!!

  • @NathanielOutdoorAdventures
    @NathanielOutdoorAdventures 2 роки тому

    Chasing gold sent me. Great catch on the gold

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Welcome Nathaniel. Yeah, Jake is often in Josh's videos too 👍

  • @CROXYS_fish_and_breeding
    @CROXYS_fish_and_breeding 2 роки тому

    Nice stuff mate about to smash my gold monster lol

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Thanks. The Monster does amazing things Croxy. Go smash the bush with it, don't smash the Monster itself LOL!

    • @CROXYS_fish_and_breeding
      @CROXYS_fish_and_breeding 2 роки тому

      @@Ken_James_SV lol if don’t give me any thing soon I’ll sell it lol

  • @ChasingGoldAustralia
    @ChasingGoldAustralia 2 роки тому

    😂😂😂😂😂 absolute legends what an amazing piece of gold and I love the tune at the end 😂😂😂😂

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      Thought you might get a laugh right at the very end 😆

    • @ChasingGoldAustralia
      @ChasingGoldAustralia 2 роки тому

      @@Ken_James_SV absolutely mate, I shared it on my community post

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      @@ChasingGoldAustralia Thanks Josh 👍

  • @getdownanddirtyprospecting
    @getdownanddirtyprospecting 2 роки тому

    Congrats Jake I hope u crushed the rest and panned it cheers Glenno.😎👌

  • @Sam-wi4je
    @Sam-wi4je 2 роки тому

    I wish there was some wireless control option to substitute for the wired UTC Controller to access the OSD. Any ideas? DVR?

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      G'day Sam, I don't know of any wireless solutions for this particular camera. The DVR for this model isn't wireless.

    • @Sam-wi4je
      @Sam-wi4je 2 роки тому

      @@Ken_James_SV Thanks Ken. Yep I agree there doesn't appear to be a wireless option except for maybe a pricey regular security camera DVR with coaxial control. Still a great camera though even with the cabling. I've really enjoyed the detail looking at the Orion Nebula and other few things I've been able to see so far with it on my 8SE.

    • @Ken_James_SV
      @Ken_James_SV 2 роки тому

      @@Sam-wi4je - Mike at 'Orange County Telescope' sells the DVR for these cameras. 👍