Відео

@@CarlaRFowler I learned after this video that my phone was under spec, this needs a fast phone processor. Here's something else you can learn, there is a newer upgraded model coming. I'm reviewing it before it is available for sale, can't tell you anything yet because I am working out of town for 2 weeks and it is likely still in transit to my studio.

If you have any specific questions or tests you would like me to do regarding the new model coming soon feel free to ask before September 11th. After the 11th I am back working out of town again.

@@pan_Mysz luckily with some motherboards that is easy with the bios flash button. Otherwise after resetting the bios it shows up again. Last night I finally ordered myself another B650 motherboard. I've had it with MSI.

@@sparketech i dont have flash button

@@danmagoo thank you. It feels excessive to have to bolt to a case but if that works for you that is great. These fans have too many wires for my liking and I ripped out the ARGB cables out shortly after and changed my case and shortly after reviewed the Thermaltake Swafan Ex120, Corsair QX120 and the Lian Li unifan which all had a hub with better stickiness and less cable mess and at least 2 of the hubs were magnetic and yes all out of pocket cost. The LTC fans interconnected and no hub needed and were provided for review. At low speed the light wings at 140mm are one of the most silent and still use 2 of them. The 120mm isn't as silent.

@@magnusgreel275I reviewed the older one and also 2 more remotes last week after this video. The new remotes especially the one with the gyroscope is awesome... I use it to control my PC, android mobile phone and to TV. It has an air mouse feature so no mouse pad like this remote needed. No press 50 times to turn volume from 0 to 100% lift arm volume up lower arm volume down. Yeah it's that cool. Click channel name and videos you'll see it at the top.

@@CurleeToes sorry no idea. Did you update the firmware and software using the software update section?

@@sparketech yeah I also reinstalled ICUE

@@timbush129 i have a video Series on trouble shooting a computer that won't boot. Sadly I am out of town working for 2 weeks and it is a nightmare to search videos using a mobile phone. If you have a PC (I have zero computer access here) on my channel you can search "reasons computer won't boot" should show both videos. Lastly, the most recent bios for this garbage board is blank screen unless I disconnect and reconnect the displayport cable. i chanced to CSM bios and the problem is now gone (as per my pinned in comments on this video). Also did you test your RX6800 on any other system to make certain it isn't the GPU?

@@Akirsop bet you got a real charge from the video quality 😉. Have a great day.

@@0x2049 don't know BUT looking at the specs the high capacity rechargeable should be very close to the Panasonic batteries. The non rechargeable would be close or maybe a little better than the Energizer max but that one is an assumption on my part. The next batteries I am reviewing are higher capacity... In about 18 days from now. I leave back to a construction work site for 15 days out of town today

I looked at the pictures on Lian Li and the connection points are in different spots therefore making them incompatible. The pins that hold the connector to contacts are all shifted over a bit. Otherwise it might be possible should you have the AL cable to the HUB... I don't know if Lian Li has a software block or not or HUB block. I hate exclusive software, that's why for months now I have been using the 3 times cheaper and similar LTC fans that can work with either motherboard software or openRGB and requires no HUB. ua-cam.com/video/kWXb8q0eUYk/v-deo.htmlsi Sadly I don't have the answer, I only used the SL model from Lian Li, the Corsair QX120, BeQuiet Light Wings with HUB and Thermaltake EX120 swafans. All out of pocket cost, LTC sent the fans, I bought the white out of pocket. And as of yesterday I removed all RGB and am now 100% Noctua puke color fans with low noise adapter for absolute silence. 50% of the Noctua fans has a slight bearing noise, I put those fans with slight noise into another computer I built.

@@luiscuper6731 I use the keyboard wired because the low power standby with a 2 second delay annoys me.

@@HypnoticValentino the high gain of a guitar distorts the audio to the interface. However you can do it with the Zoom F3, it's insane what I can do with the Zoom F3, make it an audio interface to my phone with XLR mics.... I have a video playlist called HOT TIPS with 3 videos showing all the crazy stuff I can do. Best decision I ever made.

Sorry I totally didn't notice you're not commenting from my studio channel where I test microphones, many audio interfaces and everything used in a UA-cam studio. Here's my HOT TIPS playlist: ua-cam.com/play/PLYKqcb5ycRPZcPKwZ0B9M1W7WduplZsl7.html&si=jeN87z88QWkiQ13b If you lock on my channel name right on top near my logo is the link to my Spark E Studio channel

Yes you can split them up. Just like I split up this other ARGB fans that are about 4 times cheaper at about $10 USD per fan or $30 for a pack ua-cam.com/video/kWXb8q0eUYk/v-deo.htmlsi=UaAQ6QaIi_uyMRzs

@@sparketech Thanks very much.

As far as I know there are zero plans to sell individual but there are plans for reverse flow and if you want to know how many fans can be connected and if reverse and forward flow white and back can all interconnected I am releasing my video in about 10 hours

@@m-vendor it's all the same even when HDMI. The reasons change and that is why I have 3 parts to this series of videos AND another video specifically for the MSI B650 motherboards as well with solutions pinned in comments in that video. Your issue isn't HDMI 2.1. rather it could be your HDMI cable, it could be the motherboard you bought, it could be the GPU, it could be connected devices and a combination of items. If you wrote your motherboard, GPU and monitor I might know the reason immediately. remember when things go wrong it's the parts used that matters not a spec of a part otherwise 100% of everyone would know the answer

@@Dmwntkp99 no it is not. The panels are both from the same company but this one I show is faster for gaming. The UR-QD is 4K this one is 2K resolution. The UR-QD is true 10 bit, this one is 8 bit + FRC. They are otherwise "nearly identical" with settings and the effects on the image and both panels are provided to MSI from the same company.

@@barenddeklerk2252 never had that problem "yet" but I also buy and sell off a lot of my aur purifiers. My Winix P450 still works like it did from day one but the filter holder is garbage. I modified it with clips to hold the filters in place

I must have heavy fingers.

@@deezmemes126 you are correct you want it the opposite side of which the door swings so it cannot swing out at you. The swing direction of MY door opens into the room, if I go the opposite side I am in a tight hallway. Not happening! This is NOT my house. This is the room I stay in, good observation none the less, if I don't show it nobody is going to consider it can swing into the room. I am not trying to sell you stuff and I paid this out of pocket, it's honest unlike a lot of other channels that hide possible issues.

@@markholman5540 it may work but not very well with a very lacking processor. The phone I used was just under spec but the Note 10 from 2019 is likely slower than my 2022 phone. Might still work but may struggle a lot I would guess.

@@Jayd3e101 nope, i wanted to buy AMD stock in 2016 but when you spend too much money ya ain't have anything left. Since I started UA-cam in 2019 I spent enough money to buy a turbo diesel truck cash on equipment. You may find my history of VIA Technologies interesting

@@robertgeorge9063 I am working out of town with no computer access so without looking the Corsair cables being short have a LOT of complaints from people with full tower cases. I also much prefer my EVGA Supernova G2 power supply over the Corsair which I am currently using. I have it in SFX but it also comes in ATX with longer cables and apparently even less coil whine.

@@Arelium yep... One is not even listed as one of the 3 parts... That would be the MSI B650 problems. Multiple monitors is an issue, and Nvidia GPUs updates listed in the description of part 3 video and links to the other videos are in the description. The AMD RX480 all the way to the RX590 is an issue. Samsung 4 240hz VA monitor is an issue that requires you to lower the refresh rate to 120, display adapters that change the connection beyond the cable itself, VR headsets take over the display... So many reasons

I am only just shy of 5 foot 6 about 169 cm in height. Those shirts come in different styles as you might have noticed I am wearing the long sleeve and have the T-shirts new. The fabric has some thickness to them but are super light weight. The cooling 2.0 shirts are super thin, I have a video with the thumbnail called BIG haul showing all the styles I collected for the last 2 years. ua-cam.com/video/MhynhRx2LM0/v-deo.html

The exact same second m.2 drive I tested. I would 100% never do a firmware updated unless directly connected to PC, no matter the device. Thanks for sharing, I updated the firmware before I tested my 990 Pro 4TB.

@@sparketech Acsis thunderbolt enclosures do not have this problem

@@Allan_Palms i show more changed settings in the newer firmware 041 video. If nothing help you there I am uncertain. For me I use calibration 1 under pro mode. Under gaming - game mode - leave it to the user setting. I still own my 2K version of monitor but not your 4K version, not sure what the differences are for color tones but it is certainly easy to mess things up with a setting. If you can find nothing you can always try "adjust desktop color settings" in Nvidia control panel. If you have AMD there could be similar settings somewhere... Either way, there is very little control over color tweaking :(

@@sparketech thanks a ton for your quick response man. I unfortunately don’t have a windows computer. Just IMac. I have just been using this monitor to play my PS5 on. I have a buddy coming over with his laptop and I’m gonna see what I can tweak in the intelligence app.

When these fans were first released the packaging might have been different. They provided an extra cable for free. That free cable that was not provided at the time is probably the extra included extra now.

@@sparketech ohh i see well im glad they didnt have any cable at the store cause i would buy for no reason haha

@@RoyAfuta I wrote corsair about needing an angled cable... I got like 3 cables from Corsair direct for free. I purchased my fans like everyone else, they simply did that for me

@@GolfDuff the high contrast logo was flickering in and out of focus. Firmware 2.01 was really really bad for autofocus so bad I went back to Sony. The issue was fixed in firmware 3.0 released june 26 2024 bought had already changed over and had a buyer for my Fujifilm X-S20 cameras (both of them). Wonderful camera actually, only wanted to only sell one but they wanted all or nothing

@@GolfDuff the best auto focus firmware for the X-S20 was 1.40 i believe. Really really good focus Here's the review with the 1.4 firmware (I think) showing how the camera works in different modes and use cases. ua-cam.com/video/mpL1xcKfeE8/v-deo.htmlsi=aLyEBlGTKG_ktJq2

Rescued * typo

I'll buy you a coffee for reviewing that god awful slow out of whack piece of 💩lmao DO NOT BUY

@@bookah8787 let me guess you didn't update the firmware like you 100% should. Updating improves colors, response time, improves HDR by turning off those zones that make HDR grey, stops adaptive sync from flickering and yes even more. Next time update the firmware and watch my firmware update video. My guess is you didn't even watch the best setting which is. A part of this and the next video 3 or 3. Out of the box settings is 100% the worst monitor colors and settings I have ever seen in a monitor ever. I still to this day use this monitor because it is Awesome 😎. Out of the box is laughingly bad.

@sparketech I have it set perfect it's just not for me preference really ain't it I have the LG ultra gear you also mentioned I find that way more responsive I'm a cod player iridescent rank , the colour of the msi I cannot fault absolutely crystal clear bright vivid colours it just seems to have more input delay than the LG ultra and obviously you need to be extremely quick, I mean visually 10/10 the photo editing can't fault that either, just a bit to slow on the reaction times I've got it overclocked it's at around 177hz the last time I played my settings are the same as yours so yeah for the images I'd say it's a top contender in this price range, it's just that extra millisecond or two that is off putting any other game runs beatiful ea wrc for example absolutely amazing, it's not really a big deal only for the cdl league I don't feel as quick, I may of been a bit harsh tbh lol just slightly annoying having to switch monitors for the cdl I'll probably keep it, and I tried playing a movie on it had no problems ran perfect nice details especially in 4k , it's for cod really that I'd say avoid you really need an edge on the competition expecially at iridescent, nit picking really but it really is a beautiful display

I've missed your 3rd video mate I'll have a look now cheers if I get that slight input delay perfect then it's a winner 👍

@@bookah8787 my 3rd video isn't the fix The fix IS in the firmware updates with the new settings to use. The firmware fixes the response time of button click to action on screen, the firmware has a better more accurate color mode that does not exist in out of box firmware ua-cam.com/video/npWfFVzJkWQ/v-deo.htmlsi=MzCRLi2_Cj9wxlh8

@@turbochargers7841 I never had a dual bios motherboard board so that I could not answer for 100% certain BUT usually a dual bios should only flash the selected one. Like GPU dual bios cards it is only the one that gets flashed.

@@thundermuffin5813 have you simply removed the displayport cable for 2 seconds and placing it back in? Another solution I have found is setting the bios to CSM. Details pinned in comments with different solutions but it could be the same thing, I have the same B650I. Welcome to MSI.

@@channelnamenotfound1751 if you want to know settings I show many of the settings and what gets greyed out based on what is turned on and how some settings like AMB is trash. The strobing is very bad and does not sync properly.

@@sparketech thank you

@@channelnamenotfound1751 no problem. My monitor for the past 2 and a half years has been the MSI MPG321QRF-QD it's a beautiful and expensive gaming monitor especially when firmware is updated. Haven't gone OLED due to the annoying pixel refresher and screen refresher that has to be run every so often. But for gaming there is nothing that looks better than OLED.

@@user-fl2il9pi1l i have not even tried and there is no XLR output... If you use the line out you could. I use an adapter often from line out to my camera mic in. You could use the line out in and put that into input on the mixer. The audio out if very clean

@@tamasmezei3715 it is possible, there is after all an update which I list in the description of the other videos for quadro cards. it isn't always GPU btw which several reasons are listed in the other 2 videos. MSI B650 motherboards are also an issue after EXPO / XMP memory is enabled. Also AMD motherboards take a while before they even boot up for the first time for memory training.

@@sparketech Thanks for your answer. My motherboard is a Dell 08HPGT and the GPU is a Quadro M4000. The other problem I could think of is that my monitor only have a DVI and a VGA port so basically I used a Displayport HDMI adapter with a HDMI DVI cable to at least connect it together. Im not sure if it could be a problem but hopefully not.

@@tamasmezei3715 in video part 2 i mentioned adapters can cause issues. It's common especially if you have a UEFI bios enabled... Easy solution to connect to a TV as I mention in my other videos.