ELEGOO MARS 5 ULTRA - SMALL AND PACKED WITH FEATURES

#elegoo #3dprinting #pcbway
PCBWay: www.pcbway.com/
To Purchase - shareasale.com/r.cfm?b=168032...
The newest 9k Resin 3D Printer from Elegoo - The Mars 5 Ultra
Mars 5 Ultra $269.99 [Pre-Sale]
Mars 5 $179.99 [Pre-Sale]
Due to the technical issues I experienced I would defiantly suggest watching other videos to see what their experiences were like. Below are some of the content creators I would suggest watching!
‪@UncleJessy‬ ‪@FauxHammer‬ ‪@LoyalMoses‬ ‪@vogman‬
Specs
Build Size -153.36 x 77.76 x 165 mm³
Display Resolution - 18x18um (8520x4320)
Automatic Bed Leveling
Mechanical Sensor Alarm
AI Camera Detection
Camera Monitoring with Timelapse
Wifi
Temperature Detection
Tilt Release Technology
Power Loss Recovery
Print Speeds
Touch Capacitive Screen
OTA Updates
PRINTER DIMENSIONS
260 x 268 x 451.5 mm³
JAMG HE Clear Green Resin-
www.jamghe.com/
3D Models by
MRRF Trophy -
offset_maker_lab
Gambit Bust -
3dwicked.gumroad.com/?query=g...
LUFTMENSCH_STUDIO
cults3d.com/en/users/LUFTMENS...
It adopts the latest tilt-release technology, eliminating the need for fast resin and additional conditions such as ACF release films, thereby achieving true high-speed printing at 150mm/h under ordinary conditions.
Automatic intelligent leveling design ensures plug-and-play functionality without the need for manual leveling.
Mechanical sensor alarm prompts for the resin tank, along with AI camera intelligent detection functions (AI detection of the light board, AI detection of model warping).
Flip cover design, features such as power-off resume printing, temperature protection, and Wi-Fi connectivity.
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
/ tripodsgarage
/ tripodsgarage
/ tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, @Creality3D silent board, silent board, BIRGTREETECH, SKR CR6V1.0, #Artillery Hornet, Artillery Genius, #Kywoo Tycoon Slim, #Ender5Plus #CR6SE, #FLSUN #SR #Superracer, Bondtech #FOKOOS #ODIN-5-f3 #3DPrinter #3DPrinting longerlk5pro longer3dprinter #LK5PRO 3D Printer Ender 3 Max, Creality Ender 3 Max Neo, Sovol SV01 Pro, #creality #Neptune4 #budget3DPrinter Neptune 4 Max #resin3dprinter #resin3dprinting

[@3DPUK-TECH-CHANNEL]

thanks for your great review :)

[@TripodsGarage]

Thanks for watching and commenting!

[@dovmerrill804]

My understanding is that the springs in the buildplate are part of the self-leveling feature. The Saturn 4 Ultra has them, as you noted, and the Saturn 4 Ultra’s build plate did move and compress the springs when you squeezed the build plate. I would assume the Mars 5 Ultra buildplate should of had the springs, and those springs should have compressed, like the Saturn 4 Ultra compressed, when you attempted to compress or squeeze the Mars 5 Ultra’s buildplate. Since the Mars 5 Ultra buildplate did not compress on squeezing, I wonder if those springs were missing, and that was causing failures on first- layer adhesion, and thus all your problems. Just a thought.

[@ChippedBuilds]

It looks so little and cute

[@TripodsGarage]

It is a cute Mini Me 😊

[@papapowertoday]

Well, done Mr. tripod keep it up. You are awesome, but bear is even more awesome.

[@Immolate62]

Based on the other reviews I've seen, I agree that your unit was probably defective. I'm glad Elegoo is eager to replace it. One thing I wanted to remark on is that I would avoid inverting the build plate to keep any resin drippings from contacting the upper part of the the mechanism. Thanks for the review!

[@TripodsGarage]

If I didn't have such a positive experience with the Mars 5 big brother the Saturn 4 Ultra. Plus resin machines are Elegoo's bread and butter. If I didn't take that into account, I might have had a different opinion. Thanks for your suggestion about inverting the build plate. I am still very new to resin printing.

[@woodwaker1]

John, good review! I'm amazed how much resin printer prices have dropped and the quality seems to have gone up. I sill don't have a need for them, and am very concerned about using resin, but do appreciate the information.

[@TripodsGarage]

Many thanks!
Yes, you get a lot for your money now! I am still not a fan of the resin workflow, and the smell. However, you cannot beat the quality of the prints!

[@offsetmakerlab7514]

The little guy with the MRRF logo almost made it back with no issue, but nothing a little glue couldn't fix! Thank you again for that!!!

[@TripodsGarage]

Thanks for providing the STL! Now you known the challenges I was facing getting these to print. Glad they held mostly together. See you guys at Printopia! I just booked my Silver booth, and should have some extra room!

[@offsetmakerlab7514]

​@TripodsGarage Silver, you say?? Well aren't you fancy! See you there, bud!!

[@TripodsGarage]

@@offsetmakerlab7514 @therealsamprentice got his Silver for free, because he is special. Us common folk have to pay 😀. I did request to be next to him, so there should be room for your crew, especially if The Edge of Desk doesn't use his table

[@offsetmakerlab7514]

Always looking out for us little guys! I love you 😁