Careless Mistake Cost me an SR20...
Вставка
- Опубліковано 26 вер 2021
- You live and you learn... I'm bummed, but still extremely excited for the revised version that it takes to get this car to my favorite event of the year - Hyperfest! GET YOUR TICKETS NOW! hyper-fest.net
drifthq.com
LZMFG.com - Авто та транспорт
Adam's gonna name his kid Adam LZ Jr. just so that he can be Adam LZ Sr. and have SR in his name 😂
😂😂😂😂😩
🤣🤣
Don’t give him any ideas lol 😂
Lmao its pinned
This is 2000iq
Sometimes when my battery is dead on my camera I use my iPhone. Sometimes when my Sr20 has issues I swap a JZ.
That's pretty good
wise words
He doesn't drive the Cream13 and the FD car is already JZ swapped. I miss the SR content.
and when you don't have JZ money you put in an LS
🤣🤣🤣
“Careless mistake”??? You mean rocker stoppers!!!!!😤😤😤🙏🏼🙏🏼
Lol yeah adam
Hey sam
Love your content Sam!
Whoops
😎
Dude is over here becoming the US distributor for every Australian company.
'Cept Otaku Garage ;)
Next thing we know, motive DVD and Adam worked together 😅
Its so good the quality and parts that come out of Australia its unreal we need the push. He's really helping some good companies expand state side is so good to see especially from an Australian who uses these parts.
Midnight Midas that wouldn't be a bad idea they can build very good rbs and he has spoken to Andrew before so an Aussie built RB would be awesome he can come pick it up on an Aussie trip and throw it in a sick build.
Such is right
I like how this “quick and basic build” is so many peoples dream car. Love it.
And it’s not quick or basic
@@kevinmenard6792 of his three s15s its the quickest and basicest
@@ThisGuy3117 most basic*
@@ihatecops. I said what I said
“We’re gonna keep this build simple” 😂😂😂
Adam bought Drift HQ just as an excuse to have his own stock of parts a few steps away
Lmao who knows
He said he wanted to have his own set of parts but Adam lz branded but it would of taking him more time and money than buying drift hq
He got big mad over you bending that steering wheel lol
that guy is funny haha. Or maybe he's hella tired in this video
yhee didnt like his vibe in this video also when they where starting the engine and adam was turning that thing the right way
@@AfroGaming88 he did say it was 2am... Probably worked a 15 hour day I'm not suprised he was being a bit prickly
yea he probably worked a really long shift that day and adam made it longer by fucking up ok the engine. Then he goes to kicking th steering wheel, when he could break the steering column and make more work for them. I can understand why he was mad lol.
@@swervoOG normal shit lmao
Shop lights make for some beautiful footage. So bright and clear!
AISURU.TOKYO/AGNEZ/?[Making-love]💞
(◍•ᴗ•◍)✧*。18 years and over🍎🍑
UA-cam: This is fine
Someone: Says "heck"
UA-cam: Be gone
#однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾
AISURU.TOKYO/AGNEZ/?[Making-love]💞
(◍•ᴗ•◍)✧*。18 years and over🍎🍑
UA-cam: This is fine
Someone: Says "heck"
UA-cam: Be gone
#однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾
Inexperienced engine builder rushes engine build, surprised when it instantly takes a shit.
That piston is completely fine. I've had pistons with circles on them from completely smacking valves run fine in a modified diesel for 300k km, absolutely zero issues. Those pistons are actually in another engine now, running more boost with a bigger turbo.
pistons are made to handle impacts vertically so they’re pretty strong!
It probably would be in a diesel but on a petrol engine that roughness will cause some bad knocks. It should be fine if you just sand it flat like adam suggested but.
@@InDmand hopefully it won't throw off the final cr in that cyl.
Says he's done rushing then jumps in the window and starts kicking the steering wheel instead of waiting for the puller! LMAO
and then he complains when something goes wrong lol
Funniest comment
That was cringe to watch
His employees don't seem happy
Sean cracks me up bro 😂😂 so glad he’s a part of the team now
Dude always seem stoned asf
He's fuckin great 😂
Dudes mad cringe
Why? Cause he doesn’t enjoy watching Adam make more work for them? Lol
@@TranceFur make more work? It’s called a job and Adam is the boss smh go back to mommy’s basement
What happened to your mainline dyno and Freddie?
Sounds like he packed up his toys and moved out. No one will talk about it.
T R A N S P A R E N C Y
Piston should be fine, put it at TDC cover the others and buff it to take sharp edges off, blow it off & run it. Don't go crazy just a bit of scotchbrite & elbow grease, don't hit the deck. Can always check the piston to valve clearance if you wanna be sure next time.
Still crazy growing up watching Adam’s Bmx videos and now he’s a pro driver in formula drift fuckin crazy 🤘🤘
Seeing you destroy that steering wheel because you didn’t have the right tools basically explains why you destroyed an engine before it even ran lol
Who cares it’s a fake vertex they should all be destroyed
@@jordanlynch1204 the main point is not relevant to the brand of the steering or whether it’s genuine vertex or not big homie. The point was that since he didn’t have to right tools on the spot he decided to try and break it off which would’ve just broken all the trim pieces on the column, which more than likely explains why the SR took a shit.
@@jordanlynch1204 Honestly it could have been a real vertex too, they aren't exactly known as a high quality steering wheel.
So stoked to see this! Always pumped to have you guys in my hometown. Hyperfest is always my favorite event and favorite time of the year! See you guys this weekend
Johan always makes me die laughing
sounds so good, has the tone of an old school sr mani
Thanks for the jungle book you included in my order. That book is way easier to show my friends why i like you so much!
Must be so nice to go parts shopping right in your shop. GOALS!!
Man i love the content and have been watching you for almost 4 years, but ive noticed you tend to say you’re not gonna go overboard and then spend 20k on a build
It's just a meme at this point, as Tommy always said "you can't hide money" lol. If we all had it like lz we would be doing the same thing with every car
yea when he says that he is going overboard i just know tht he is😂
20k on a build is not much for a build at all. Try having 30k+ in just a engine.
Yeah there's waaay more than 20k in this build. Especially if someone was billed by labor hours
He just bought an entire parts company I don’t think that’s overboard for him
11:48 when your boss is fucking around but creating more work for you.
i understand yall tired and the crazy starts coming out but PLEASE dont play with compressed air. im not trying to kill the fun but iv seen some messed up accidents from people playing around with it and i just dont wanna see someones eye bulging out because or worse just because it seamed fun. keep up the good fight!
These are my favourite videos thanks
that little edit to the beat at 2:02 is so smooth
Can't wait to see it at Hyperfest. Hopefully I can get in ride along line when not driving B group. Either way can't wait to see this shred!!!!!
Very instresting , looking forward to watching the rest. 🤙🏾
That new manifold sounds sick. The turbo spool is nice and loud at low rpm revs 🔥🔥🔥💪
@12:00 Sean is so done w your shenanigans 😂
you can tac weld on to the scored part of the piston then grind it smooth and rebalance it as a easy fix, you might have to machine the head if you choose to reuse the same one
I get genuine good vibes from Adam😎👍🏻 rock on man
Rocker arm stoppers are also no good because instead of throwing the shims when they should, they keep them in-place and direct that damage to the valve in turn usually causes a piston to be not so happy anymore.. Ive thrown rocker arms from rev limiter, lucky enough the head has many cavities the shims like to sit in! just my .02
Johan doing some sick work!!
Good job Adam sounds really nice.
I'm not normally big on the sound of a 4 banger but that thing does sound sick. Love the deep tone.
All that matters is that you learned from the mishap. Don't look at it as a mistake just a learning experience. I have trashed a couple Motors by trying to rush and take shortcuts.
What an amazing life you have. To be able to do something you love and are passionate about every day and get paid a ton of money all while enjoying the fruits of your labor. You deserve it buddy!
Sounds amazing can't wait til it is all one color.
When my hair started to thin, I went and got a perscription for finasteride. Without it I'd be bald. I now have a full head of hair.
No shame in it brother
Ill look that up thanks
Finastride definitely works. The only risk is if it negatively effects your mood(which is possible) but it doesn't hurt to try.
@@Anon.G been on it for 2 years now. Not a single issue so far 👌👌
Takes about 6 months to start noticing efrects. 1 year to fully see benifits. But it will stop hair fall
Never rush. Rushing just creates new problems. When engine building always triple check every single thing. To many people working on one thing. Also working late into the night or working all day long makes it easy for mistakes to be made, even small mistakes or stupid mistakes are bound to happen when working late or when tired. I learned the absolute hardest way possible when reinstalling my freshly built trans into my truck. Did all the work in one day finishing around midnight and had it running/driving. After 65 miles I had to pull the trans back out because I broke an important part while working on it late after going at it all day. Tiredness and sloped driveway caused me a lot of extra work and another $500 😔
What a nice build !
Your telling me Mike wasn’t around at that moment to capture the engine failing.. the dissatisfaction i feel runs deep 🗿
As you can imagine not everything gets recorded nor put in the video.
@@logicskater1185 obviously
Sometimes I forget to hit Like, but then when you were fucking with the steering wheel and Shawn was getting so mad at you, I instantly looked for the like button, this is why im here
Wow that sounds so amazing
little XJ650 sounds nice with a 2 inch, when its running on clean gas that wasn't given away for free because it came out of a parts washing tub. so much oil the spark plugs are fouled right as its wormed up. compression detonation idle limiter.
Collettes rx8 @ 7.54 bring me back to nfs2 underground days...so nice I love you guys
bro i can see u work so hard... ur pillows bellow eyes.... and ur channel deep... ;)
Adam- today I learned that rushing things can lead to 😭
Also Adam - 11:05
If you are going to reuse the piston (which I probably would if the damage is as minimal as Adam makes it sound) I would remove the piston from the engine and polish out the damage and then clean piston, lube it back up and reinstall it. Additionally unless you have a lathe and proper polishing bow I would seriously consider sending the camshaft out to a machine shop to have scratches polished out. Not to rub salt in the wound I am a firm believer that before starting an engine that any internal work was done to I cannot stress enough the importance of removing the spark plugs and rotate the engine over by hand at least one time for every cylinder. Secondly if you hear a strange sound when starting a newly rebuilt engine and you hear a strange sound stop and determine the cause of the sound before cranking the engine again. All that said opinions are like a certain excretory body orifice and everybody has one. Have a nice day and a better tomorrow.
jus a couple friends workin together on cars.. great vids man.
Can someone fill me in on where Freddie's gone
It's really nobodies business.
@@SylasG is cos I want a tune off him. Pull ya head out
@@SylasG nothing wrong with people wanting to know.
All his employees like Adam no stop it’s gonna break.
I just love the idea of a “kid” running a company while the “adults” say that’s silly while they can’t do anything coz dats da boss 😂😂
Kid? They're all close in age to eachother.
@@SylasG adam is just funny and goofy, u get the idea...
That sounds really good
Honestly I felt the burn when ya just booted the wheel. Mind ya, forsure knockoff. The exhaust sounds amazing, incredible fab work
Its ok Adam. I don't think Mensa had you on their wait list to start with.
lovin the low-fi tunage!!!!!
sucks to see this happen for sure.. WOW hope you guys come back hard!
I have a HKS sleeved SR20 built by JP in CT if you're interested. Sorta just sitting since I pulled it to go turbo LS.
This is how you learn. Keep doing it! :)
Can’t wait to see finished
💪🌎🙏
Love the vids man
Awesome video!!
the shot of the garage at 18:52 it looks like a shot from a movie damn.
Good video Adam👍
Dude that SR sounds roudy I can wait to see what it does on the dyno💯💯💯
Sounds good dawg!
this car is sick love the green
Btw guys you don't need a power probe just set your multimeter to amps
Love the vids Adam
That cam sensor dopeeee
On a positive note…. That valve cover looks NICE!!😎
Not quite the same caliber dude but I lost a engine due to putting the vac line to the top of the wastegate at 2am with a fuel cut defender as my only management. Sent 20 psi through it and 4 miles later boom. Sorry for your loss
mm use the same pistons on that engine clean the dent from the valve hit and weigh all the pistons balance them and your good to go. but i would really weigh them and balance as it might have lost same material. no rush man skipping something so small can cause an issue again. power and reliability is all in those small tolerances and numbers ;)
Love the videos keep making them love the 2jz
There's no 2j in this video
Have to get on that Keeps treatment!
Love the vidz.. best content creator out their… keep up the great work.
that piston is totally fine. take like triple ott steel wool and polish all the high spots because thatll cause heat stress and run it.. we've had them worst on our sport fwd drag car over 1200 hp and motor lasted a whole season
Sounds SO good at idle
Much approve
Legit the best sounding car I’ve ever heard
16:30 the brake caliper has the + shaped anti rattle the wrong way. :)
Can’t wait too see what it puts down on the dyno
Sounds mint!
Wait that can't be an SR... Where are the lawnmower sounds!
I've never gotten an SR to sound as good as that does when it's running rough and untuned... Might need to investigate that manifold next time I have one
Dayum that sounds nice
I wonder how much that dented piston sacrifices the lifespan of the engine.. it had to have done something to the crank bearings (in theory). I wish ya the best with this build.
Sounds so damn good!
Whats that billet piece in between the idle air control valve with the rubber hose attached??
Adams lights are so good I thought I saw daylight 😂
The piston will be fine, light sanding so there are no high spots that will heat up and cause detonation
I need to come back to Florida and work on my car with u guys...
Turbo Tre helped me last then he moved
sr20 Sound so sweet bro
Can't wait for the dyno video. What ever happened to the Barra engine?
Thing sounds RAD!
That piston should be alright just from how it looks on camera. If you really can't feel much, even with a fingernail, you should be totally fine. Give it a rub down with some scotch brite just to make sure it's smooth and to remove any kind of burr (unlikely, but better to be totally sure) and you'll be fine. If it was super high interference with big valve reliefs I'd maybe want to get it looked at but it's all good for an SR.
Adams hair is on point😂😂🤙🏻
An absolute necessity on any mechanical assembly is to lubricate and put it through the motions by hand weather it be a engine, transmission, any sort of pumps like power steering. Basically anything metal that moves. It’ll save you a lot of time and heart break in the long run
I honestly think you've knocked a shim(or was missing one when it came back from the shop) or moved the rocker While installing ( Like you said in the video,) Rocker stoppers Don't cause that, Only down side is if nothing comes loose It will jam on the rocker and can cause more damage
I don’t like how uneven the compression sounds on the other engine while cranking