1960-66 Chevy & GMC Truck Cab Corner Repair Patch Install / Rust Repair / Metal & Body Work
Вставка
- Опубліковано 25 сер 2024
- Complete step-by-step process on repairing rusty Cab Corners on your Chevrolet or GMC Pickup!
Product Links:
1960-66 Cab Corner Patch Panel LH
www.holley.com...
1960-66 Cab Corner Patch Panel RH
www.holley.com...
Patch Panel Clamps
www.holley.com...
Connect with us:
Instagram: / brotherstrucks
Facebook: / brotherstrucks
Honestly this is the best channel ive ever seen for this! You are very in depth and the ways you teach and demonstrate are super helpful. I appreciate your work and you're helping me ALOT with my first vehicle! (1979 c10)
Wow, thank you! Good luck with your project!
Great instructional video as always.
You make it look easy.
Have really been enjoying all these older truck repair videos.
Thank you very much for sharing your knowledge with us weekend project novices.
Appreciate it.
Thank you for watching and giving us a reason to continue!
Great video, gives full confidence to get this job done! Thanks Dave!
Our Pleasure!
These series of videos are really awesome! Lots of great information. Keep them coming!
Thanks James!
I would love to see these projects done on 1947- 54 trucks. I like the detailed instruction.
We have lots of videos on the 1947-54 trucks on our channel. Anything specific you'd like to request?
@@BROTHERSTruckPartsTV I have watched alot of the videos. but not any metal repair or panel replacement for the 1947-54 series. I have a 1954 chevrolet 3100 and a 54 Gmc I'm getting ready to start Restoring. Videos on cowl panels, Rear Cab Panel, Floor pans, Pillar sections etc.. I've owned them for more 30 years and time to give them a makeover. I'm a fair welder but I could little use some of Dave Welch's instructions. I've watched almost all of his videos even the old ones. Great help.
@@wilsonwilson9074 Ok, that's good info. We'll poke around and see if we can find a donor truck that needs some or all of that work. Good luck with your projects!
Y’all have helped me out a lot with my trucks!!
Happy to do it!
Dave is the man.😎
Once I finish the big problem areas on my 62, I'll be looking forward to cab corners. :).
Thanks for the help
I’d like to see a full floor replacement in a 67. 😁
We'll try and find a donor truck. Thanks for the suggestion.
Dave you made it look easy, excellent info all the same.
Cheers
Thanks man!
Great video, now to do my 65 GMC cab corner with confidence
Right on! Thanks for watching.
Your videos really helped me out, thanks Dave
Our pleasure!
Love watching all his work very thorough explaining the process
Thank you Robin!
Thanks David a lot of good info it been helping me with my 61 chevy apache project
Right on!
Great information!! Great communicator!! Great channel!!
Thank you for watching!
How's the knees Dave ? Picked up a cool little knee saver awhile ago it's a small heavy foam pad you can pick up at harbor freight, probably 24"×12" really works well and fairly cheap. Nice work btw 👍
Thanks for the tip!
Thank you David, this was very helpful and look forward to your next video.
Thanks Miguel!
I'm collected all of (Brothers Trucks) tips & how to project videos putting on blank Cd & keeping them.
Solid idea!
Thank you very informative
Our pleasure!
Great vid ... Build On
Thank you sir!
👍
Yea. Do it right. Just wait until you know in your heart that it's right....
👍😊
WTG Dave!
Thanks!
Great video.... Do you offer the body panel block/holders that you used to hold the panel parts together ? Thanks
Yes we do, product links are in the video description. Here you go: Patch Panel Clamps: bit.ly/2QACGxc
That's it I'm buying an old truck
Yeah man, that's the right attitude!
How do you repair rust over windshield n doirs
What size welder and what settings do you use? and what size wire?
Just wondering, where did you find the replacement piece that you added on. It looks perfect for the application. I've got some section repair work coming up, and not sure where to find the metal for my replacement. Nice video, thank you!
All these videos are made using parts from BROTHERS Truck Parts = www.brotherstrucks.com
Why not drill those bottom holes before you weld the piece on?
Do you have a floor pan/rocker that extends all the way to the back of the cab?
Our floor pans will handle a rear of the floor repair.
Hello Brothers! Just a small question..i see and enjoy many of your body works and weldings. I restore a 1960 Apache Truck with new sheet metal in cab. So i just wondering what thickness you use in your welding core? And do you use gasless flux core or with argon gas. Thanks for answering. Robert j
we use .23 and we do use Argon.
@@BROTHERSTruckPartsTV Thank you. You are the best.
Under what circumstances would you brace the cab?
If you were to remove the entire floor at the same time and maybe a rocker panel as well. Really just anytime you feel like the cab "could" be weakened. There's really no wrong time to brace it, we always say it's better to be cautious than reckless.
Wouldn't you drill spot welds hold first in the new panel be4 u weld ?
I do that underneath on the rockers when I do them, basically because it's easier than laying on my back drilling holes. But when the holes are easy to see and access, I prefer to drill them in place. Honestly, there's no right way, either way works!
@@BROTHERSTruckPartsTV ok I was just always Taught to drill hole and clean metal behide n use weld though primer.. like the videos
Can someone please give this dude a small rolling chair to work on totally sucks working on concrete
We've offered every conceivable comfort option but Dave is stubborn and set in his self destructive ways. We just let him do what he wants to do.
I'd use that hoist for every job possible, working on the floor like a dog as Dave said gets hard on knees.
Why not drill those bottom holes before you weld the piece on?