Go Kart Harbor Freight Predator 212 Won't Start?
Вставка
- Опубліковано 15 сер 2024
- I pulled my go kart out this spring and it wouldn't start. I tested it out with starting fluid. It would start but shortly die. That tells me it is some in the carburetor. good thing they are easy to take off and clean. The great thing about the Predators they are easy to put on anything from a tiller, go kart, mower, chipper, power washer, generator so many things. This cleaning works on almost any small engine from Honda to Tecumseh to a Briggs. It is a close clone to Honda gx190 and gx200. Hope this helps!
Here are some other links to more small engine repair videos:
Valve Lash Clearance - ds • Small Engine Repair Va...
How to to replace ignition coil - • Video
Harbor Freight Predator won't start - • Go Kart Harbor Freight...
3 Small Engine Tips - • Small Engine Repair Ho...
Sharpen mower blades - • Video
Carburetor leaking - • Video
Generator won't start - • Small Engine, Generato...
and if you get really board and want to build a go kart - • Homemade Go Kart made ... - Навчання та стиль
Thank you, thank you!!! After having not used my Predator chipper/shredder for a few months, it would not start after hundreds of pulls. I drained the gas from the carburetor as you showed and it started up after just a few pulls!! You saved my butt.
Good to hear!
Thank you so much my man after cussing at this thing and watching 20 videos yours was the answer corrosion in that little thing
Awesome, glad it helped.
Mine wont start right out of the box. 😢
Same
Mine only start with the choke on run and shuts off immediately if I switch to start while it's running@@malachijodway3350
Great video, thanks for taking the time to make it
This is a good video ..sone guys like to here ther self talk but you were very straight to the point on wat u needed to do to make the motor run agin
Thanks!
aren’t these types of karts belt driven with a gear reduction box? did u put that sprocket in the differential?
What if the engine doesn’t want to run at all even with starter fluid. What’s the problem there
Have you checked for spark?
Double check it's on. Check that it has oil (these have oil sensors that cut power if the oil is low). Check if you are getting spark from the plug.
Mech Master Hi I have the same problem, how do you see if you’re getting spark?
@@hxnsell5825 I show how to do it in this video.
ua-cam.com/video/UHdktxjBjew/v-deo.html
I just subscribed to your channel you are a boss brother thank you my yr and a half project does 47 on the straight away....woooooooooooohoooooooo!!!
Awesome!
What if my turns on but when i switch to run it stalls out
Have you tried cleaning the carb? It means you have a very small piece of dirt or dust that is not letting enough gas into the cylinder when you take the choke off. Clean the carb and that should do the trick.
Changed out the carb on mines the only way I can get it to start is if im holding the throttle. Carb was tuned to specks im lost on this one any pointers..
O yea so when I was draing gas from the bowl I started it up just to see and it ran without shutting off the minute I closed the drain to stop the gas from leaking it shut off
Late response but it sounds like an air / fuel mixture issue. Did you end up finding the issue?
Thanks your the best. My kids go kart starts and then dies. Gonna try this see how it goes. Wish I had a man that could do this for me so I wont get my hands dirty. Could use a man for other things :/
Hope it did the trick!
Thanks for the video
Hey i was wondering if you know how to fix a problem that i have on my predator 212 it only starts with starting fluid then it shuts off and I already put a new carburetor
If it starts and then dies it's a carb issue. Was the carb an aftermarket one? Sometimes, even new ones, still have issues out of the box.
Need help with mine, it idles but it sounds like its cammed. Sometimes it dies out, then I have to pull it to start it, after doing that I try giving it throttle but it stalls. I've cleaned the whole carb, checked for air leaks. I'm super lost
Same bro same
@@lucid4984 i just figured out the problem, wasn't even the carburetor. It was the spark plug. Thing was fouled to hell and back with oil, and gas. Got myself a new spark plug and she runs like a dream now!
@@BAMaher mine has a good spark, everything seems fine but I can’t tell so I’ll try the spark plug but I cleaned the carb and it won’t start at all
@@lucid4984 dumb question, but do you have the motor choked when starting it? Also I'd try something here... squirt a little fuel in the cylinder threw the spark plug holes and see if it turns over
@@lucid4984 when I worked on 2 strokes and couldn't get them started I did that all the time
hey @Mech Master my go kart doesnt have that one bolt on the bottom of that goldish thing and mine is a trailmaster
Is the bowl threaded? Wondering how you would take it off.
what do i do if i cant get the jet out and i dont wanna strip it
Soak it overnight in penetrating oil.
Helped me immensely. Thanks!
Good to know it helped someone!
I tried the screw driver and didn’t work2:20
Same. How you get it out?
Mine starts. Stays on for like 10 seconds then it turns off. What should I do?
Did you try cleaning out the jet? That would be my first guess of the issue. Since it starts the port for the choke is not clogged just the main jet.
I used regular car oil for a go kart and it worked for about 10 minutes now it won't start could the oil be a problem its a brand-new go kart
No, I've used car oil for years.
One year late but the predator 212 is designed to turn off when the engine tips over. This is called the "oil sensor" which is the yellow cable next to the kill switch. You can youtube how to remove it. The engine will shut off when the oil is low and most of the time a 212 will be placed at a weird angel on a go cart making it shut off because the engine thinks it's not getting enough oil (even though it is)
I just bought myself one and it won't start out of the box. I checked the spark and it works, I can smell fuel when I pull the cord. I'm thinking when I hooked up the new fuel line I messed with the carburetor and knocked something loose. I'll have to take a look at it tomorrow.
I think I seen what I did wrong. What are those linkages you put on there at the end? What are those for because I took mine off and couldn't figure out where they went back on it.
Make sure if you order this engine that it doesn't come from California or any state with emission laws that effect small engines I bought this engine and it ran rough. It surged smelled as if it was flooding studied up on it there is no adjustment for air fuel flow had to order a new adjustable carb. Only 22 dollars with tune up parts but from time engine arrived till use was 5 weeks. Beware !!!
Mine will run a little bit and go out the driveway and shut off
I'd clean the carb again. Either the main get or the inlet is dirty. Sounds like a little is getting through when starting but not enough to keep it running.
I put the stage one kit from go power sports on the engine and I put the upgraded jet on there and now it won’t start? Do you think it’s because of the jet? Should I put the old one back on?
UA-cam how to "tune a carberator" you could be giving it too much air and its choking. Or giving it too much fuel and its drowning. Since you put a stage 1 from powersports im guessing you put just the exaust pipe and air filter. Those air filters are huge!!! And giving it too much air. You'll need to tune it down because giving it to much air will choke it out. Might even have to change the air filter only
that's cool! good info to know
I have a new predator 212 motor that will not start
I break a small piece of welding wire just run it through the jet
Nice‼
I use only ethanol free gas in my go carts and mini bikes
What about 10% ethanol
would a screw clog up the filter?
Like an actual screw in which filter? The fuel filter, air filter?