If I might make a minor suggestion to save you some grinding. At 0:40 try drilling a hole and just making a cut on either side. Much faster and you don't wear down the grinding disc as much. Plus it looks neater without spending as much time cleaning the inside of the cut. Are those front wheels the same design you used previously on a project for a delta trike conversion? Made from hoverboard motors. I was always impressed by those, but the earlier one took away the ability to pedal as well. A tadpole trike (or reverse trike) gives pedalling back as an option when the battery runs out. 4:06 smart clamp design. Simple but effective It's good to see the design changes and evolution of the design as you go (e.g. the steering alteration). Gives good insight into how you overcome challenges and shows us things that do and don't work. Very much appreciated, thank you. I'd love to know how using the wheel axles hold up being used that way as opposed to using the steering tubes from bikes. Any chance of a future video showing what worked well and what needed upgrading later? Having similar traction problems with the front wheel drive on the ebike I just assembled for my mother - LOTS of wheel spin. But that's part of the fun isn't it?
your suggestion are great😮👍. for steering tube, I weld the tube in nut(5:31) and it counter by another nut, in video uphill, can't make it full throttle because both front wheel loose traction. and it not so stable in fast driving.
I also appreciate the way you added your steering design change. ''ANYONE'' who builds ''things'' always comes to those moments of realization that simply goes ''WAIT, I CAN MAKE THIS WORK BETTER IF I USE THOSE OTHER PARTS & BUILD IT THIS WAY''.
I was having a hard time locating old bike frames where I can chop off the head tubes for the steering of my recumbent trike that I'm building. Then I saw this video. I like the way to thought of using hubs to turn the front wheels. My problem is solved. Thanks bro. Keep it up.
Well done for the price. Next steps: - Ackermann steering (inner wheel steers sharper) - caster (wheel pivot axis points in front of the contact patch) - build wheels as close as possible to their pivot axis - suspension
Suspension would be an added feature, but the other points should have been incorporated into the original design; it's not hard to find the relevant information.
If I were to make a suggestion I would use your build and add the trike rear axel with basket for battery pack holder and perhaps adding a 2 cycle gas generator as well
You are the king of reusing hoverboard motors! :) I wonder if you have considered using one of these motors and creating a wind turbine to capture wind energy. I understand that electricity is very expensive there in the Philippines, and your skills are certainly enough to make something cool.
dude, to optimize steering the extension of the turn axis of each wheel should point to a point just cm before the contact point of the tire. this way you avoid bump-steer and motor or brake steering influences...
Abert, very inspiring and thanks for sharing. Uuwi ako later this year para magpagawa sa iyo ng isa- but purely by pedal power. Hope may time ka at that time👍🏼
Great job! Im hoping to do something a bit similar - but with tilt... Im learning stick welding - and finding it difficult - you make it look SSOOO easy! Brill!
Masyado syang magaan kaya nawawalan ka ng traction. Yung space sa ilalim dun siguro pwede lagyan ng battery storage. Pati likod may motor din? I think kailangan mo na gawing 60 or 100w yung battery.
my dad was trying to assemble something like this but with a custom built chassis, it would be pedal powered but with a custom shifter, it would be like one in a car but it would make the regular shifter like on the back of a mountain bike shift through 6 speeds, i might make a electric conversion for it with a high amount of torque and speed so i might go maybe 60+ mph with the 6 speed (edit: now that i think of it, it might be too fast for a 6 speed electric conversion for a 3 wheeler, and then it might be too dangerous XD)
NA$A engineer this🫡 person no doubt‼️ has a mindset to move forward💯(Well, many people are thinking about foolishness such as baseball games or cartoons:) no doubt he’s got things on his mindset that are yet to come into existence that will shock people at MIT✊🏽👋🏽🕊️
I have an old adult size trike I’ve wanted to convert to 2 wheels in the front but I want the front wheels to have brakes. I’m not really sure how to do that.
You'll have to buy braked front trike wheels, or at least brake hubs to put in rims. Alternative is to use whole front forks on each wheel and use rim brakes. Makes for a bulky front end.
@@albertnario4877 gañan talaga ang mga front wheel drive. Meron kasi akong cruzbike.com Silvio 2.0 fwd nag iiskid yung harap. Tuloy mo lang yan ding project na yan with motor sa likod para maging 3-wheel drive. O kaya another project with tadpole leaning front wheel. Nasa Recumbent bike ako since 1996.
Sayang nmn at mejo na late ito ng konte na sold ko na yung recumbent tandem kong bisikleta, halos matumba kami ni misis sa paakyat. Made by Sun Bicycles EZ-Tandem AX with IPS independent pedaling system.
If I might make a minor suggestion to save you some grinding. At 0:40 try drilling a hole and just making a cut on either side. Much faster and you don't wear down the grinding disc as much. Plus it looks neater without spending as much time cleaning the inside of the cut.
Are those front wheels the same design you used previously on a project for a delta trike conversion? Made from hoverboard motors. I was always impressed by those, but the earlier one took away the ability to pedal as well. A tadpole trike (or reverse trike) gives pedalling back as an option when the battery runs out.
4:06 smart clamp design. Simple but effective
It's good to see the design changes and evolution of the design as you go (e.g. the steering alteration). Gives good insight into how you overcome challenges and shows us things that do and don't work. Very much appreciated, thank you.
I'd love to know how using the wheel axles hold up being used that way as opposed to using the steering tubes from bikes. Any chance of a future video showing what worked well and what needed upgrading later?
Having similar traction problems with the front wheel drive on the ebike I just assembled for my mother - LOTS of wheel spin. But that's part of the fun isn't it?
your suggestion are great😮👍. for steering tube, I weld the tube in nut(5:31) and it counter by another nut,
in video uphill, can't make it full throttle because both front wheel loose traction. and it not so stable in fast driving.
Shows your keen interest in trikes!
I also appreciate the way you added your steering design change. ''ANYONE'' who builds ''things'' always comes to those moments of realization that simply goes ''WAIT, I CAN MAKE THIS WORK BETTER IF I USE THOSE OTHER PARTS & BUILD IT THIS WAY''.
I was having a hard time locating old bike frames where I can chop off the head tubes for the steering of my recumbent trike that I'm building. Then I saw this video. I like the way to thought of using hubs to turn the front wheels. My problem is solved. Thanks bro. Keep it up.
Great tricycle. Many thanks for showing us your skills making such a needed bikes also for senior citizens.
Well done for the price.
Next steps:
- Ackermann steering (inner wheel steers sharper)
- caster (wheel pivot axis points in front of the contact patch)
- build wheels as close as possible to their pivot axis
- suspension
Suspension would be an added feature, but the other points should have been incorporated into the original design; it's not hard to find the relevant information.
Never thought I'd be rocking the safety squints watching a video, but here I am.
You should thank your Mr. assistant cat at 7:51 that without his supurrrrrvising you couldn`t made it , i bet he gave you all the intrurrrrductions😁😉
If I were to make a suggestion I would use your build and add the trike rear axel with basket for battery pack holder and perhaps adding a 2 cycle gas generator as well
You are the king of reusing hoverboard motors! :) I wonder if you have considered using one of these motors and creating a wind turbine to capture wind energy. I understand that electricity is very expensive there in the Philippines, and your skills are certainly enough to make something cool.
I have plan for it.
dude, to optimize steering the extension of the turn axis of each wheel should point to a point just cm before the contact point of the tire. this way you avoid bump-steer and motor or brake steering influences...
من اين ناتي بالملفات الكهربائية
لدراجة كهربائية راقية
Ackerman angle.
Teach a man welding he will build anything
Very good simple design! Next work on front suspension.
q
Привет из Казахстана.классная техника получилась!!!.желаю успехов в дальнейших проектах!!!
Abert, very inspiring and thanks for sharing. Uuwi ako later this year para magpagawa sa iyo ng isa- but purely by pedal power. Hope may time ka at that time👍🏼
Great video, great work
I think that trike is awesome I'm disabled and ride a trike I would love to try one like that which won't tilt and tip over
Outstanding!! Love the cat, too :)
I guess this guy has done it! Twin wheels in front!, I mean. WOW! But this one is really special
Good to know I'm not the only person welding on the ground in sandals.
Great job , cool idea , I think I will do one with my son thanks for the idea and thanks for the video , keep the videos comming
Great job! Im hoping to do something a bit similar - but with tilt... Im learning stick welding - and finding it difficult - you make it look SSOOO easy! Brill!
Ни от нас нет
Going about 25 give or take top speed thats kinda crazy respect
if it was a tilting part and suspension that would be great
Awesome job friend , love the videos,keep em coming...
thank you
Wow galing naman educational marami aking nalaman sa demonstration mo marMing salamat.
Excellent invention
uhh. wont those front shocks fuck up the weld to the frame?
Masyado syang magaan kaya nawawalan ka ng traction. Yung space sa ilalim dun siguro pwede lagyan ng battery storage. Pati likod may motor din? I think kailangan mo na gawing 60 or 100w yung battery.
my dad was trying to assemble something like this but with a custom built chassis, it would be pedal powered but with a custom shifter, it would be like one in a car but it would make the regular shifter like on the back of a mountain bike shift through 6 speeds, i might make a electric conversion for it with a high amount of torque and speed so i might go maybe 60+ mph with the 6 speed (edit: now that i think of it, it might be too fast for a 6 speed electric conversion for a 3 wheeler, and then it might be too dangerous XD)
amazing!! nice work bro!!
I watched this in my kitchen in Detroit Michigan 🤣🤣
nice one bro 👏👏👏
Excellent Bro😎👍
Good job👍👍
Для ребенка в самый раз, молодец!
what are the controllers for? Could it work without them ?
Угол наклона колеса должен быть разным и во время поворота внутренне колесо должно быть с большим поворотом !
what a genius. next design add suspension and anti-rolling
Love the young kids. Try to do burnout then riding on two wheels. Fantastic.
But the wheels together next time to be one wide front tire, perhaps ✨💖
👍👍👏👏👏👏👏👏good
NA$A engineer this🫡 person no doubt‼️ has a mindset to move forward💯(Well, many people are thinking about foolishness such as baseball games or cartoons:) no doubt he’s got things on his mindset that are yet to come into existence that will shock people at MIT✊🏽👋🏽🕊️
You built another bike ? 👍
Nice idea. Needs a front shock system.
ALBERT, YOU'RE A F***ING GENIUS
Wow... Amazing, hello i'm from Indonesia
Ese hombre se pasa la vida en chanclas jajajaj
🚴♂️🔊🔊🏁🏁
logico mira vive en un ambiente caliente
You r a genius
nice work
Very nice i like that very well.
Excelente seu trabalho.
giving the not-a-wheelchair a go for its price hahah
@Elian Juelz nice can you tell me more??? i m intereesdted
@Lora Almanzar oh really? proof?
Why??? Seems to work fine with drive wheels in the back.
I have a hoverboard wheel motors at the font wheels.
Boa noite companheiro, trabalho bem feito, bem pensado, parabéns,de Feira de Santana BA Brasil
7:50 The cat came to check
I have an old adult size trike I’ve wanted to convert to 2 wheels in the front but I want the front wheels to have brakes. I’m not really sure how to do that.
You'll have to buy braked front trike wheels, or at least brake hubs to put in rims. Alternative is to use whole front forks on each wheel and use rim brakes. Makes for a bulky front end.
Oh come on now, how fast does it go
A lot of heavy metall as usual)) Very good)))
Greetings from Finland! Can I turn yours channel name into GIF?
nice thanks 😁👌
Nice bike bro
Where do you live in the PH anak?
VERY NICE -
NICE AND DANGEROUS
Que legal. Ficou bom
Центр тяжести вниз аэродинамика лучше при низкой сидячей спине
Great job
This guy welds with sandals on.
Good. Front drive it the best way for electric transport
Can you make a prototype of bajaboard model?
that's complicated, but lets see if I can 😅
Sir saan po pwede bumili ng mga 2nd hand or used na hoverboard motor? gusto ko din sana gumawa ng electric bike. salamat po
carousel ako nakakabili
Wish I could buy one of these?
you shoulve incorporated front suspension
I loot ft
с чего брал колеса.?
Very intrinsic will find a simpler way .... !
Very Good!..
😮😀😀😀😀💖👌
Magkano Kaya magastos ko may bike nko,I convert ko sa ganyan,thanks,sna napansin mo
nice, galing sir, parang sobrang lapad lang ng 2 gulong.
walang suspension
Idol keep it up!!! Malapit na din ebike ko dual motors
karera pag ok n yn.. 😆
Bueno no quedo bien explicado. Pero tienes algún vídeo más explicaciones.. no soy un mecánico
Turn it to recumbent tricycle
Good
Какая скорость ? What speed
Amigão pode me informar o tamanho do dos raios e do ar da janta por favor do pneu para encaixar hoverboard
Bravo !
By Cortina Italian cicli bizzarri
Thats neet useing bike hubs as bearings
This raw method
With same material a better product can be made
Hola amigo quiero hacerla para un familiar con discapacidad tienes los plano para hacerla
I wish but I would lose the rest of my fingertips. already lost one fingertip...
What happened to you?
Caliper AND disc brakes on the rear wheel. I see you don't play games.
Quality na naman boss 👍
muntik n nga ako tumaob jn.. hehe
@@albertnario4877 usually nmn di taubin ang tadpole design. Yung delta design ang taubin 2 gulong sa likod isa sa harap.
nag skid kasi yung gulong sa harap, kaya nawawala ang pagiging stable nya.. lalo na pag lumiliko parang tinutulak kapa para matumba..
@@albertnario4877 gañan talaga ang mga front wheel drive. Meron kasi akong cruzbike.com Silvio 2.0 fwd nag iiskid yung harap.
Tuloy mo lang yan ding project na yan with motor sa likod para maging 3-wheel drive.
O kaya another project with tadpole leaning front wheel.
Nasa Recumbent bike ako since 1996.
Ingat ingat na lang sir. 😊👍
А как развал схождение регулировал?
very cool
👏👏👏👏👏👏👍.Edvandro do Rio de Janeiro Brasil
Está fenomenal el invento, pero más parece fatal pedalear con chanclas. Me parece fatal utilizar chanclas para manejar cualquier tipo de vehículos
Me parece fatal pedalear con chanclas
No point if it doesn't lean😢😢
YesSiRr! 😎😎!100thcomm!! TrU story
Gd pm brod, puede b magpagawa sa inyo
👍👍👍👍👍👍👍
Sayang nmn at mejo na late ito ng konte na sold ko na yung recumbent tandem kong bisikleta, halos matumba kami ni misis sa paakyat. Made by Sun Bicycles EZ-Tandem AX with IPS independent pedaling system.
Ga beda jauh dengan becak, tapi bagus inovatif
Becak gk ada power steering berat klo belok