02 Ford F250 bed crossmember replacement
Вставка
- Опубліковано 12 вер 2024
- In this video, a 2002 Ford F250 Superduty gets the truck bed crossmembers replaced. I share a couple tips and tricks along the way. Let me know what you think. Thanks for watching.
👍PLEASE LIKE AND SUBSCRIBE!👍
/ @fullrange4x4
PARTS:
amzn.to/3OuJTte
👆🏻👆🏻👆🏻
1999-2018 Ford Superduty LONG Bed Floor Crossmember Kit with Bed Mounting Hardware.
amzn.to/3SvGjjM
👆🏻👆🏻 1999-2018 Ford Superduty SHORT Bed Floor Crossmember Kit with Bed Mounting Hardware
amzn.to/3SN3bg3 👈🏼1999-2018 Ford Superduty Bed Floor Patch
⚠️DISCLAIMER⚠️
I am not a mechanic. Anything in this video do at your own risk!
#diy #repair #ford #rust #mechanic #f250 #fix #truckbed
Great job. Well made video too. I’m doing this project this winter with some other rust repairs. I’ve got a 2004 manual 5.4. Whole beds are expensive and hard to find. Replacing the truck is just not worth it.
Thank you, I appreciate it!
Great video , my F350 DRW could use this done to it wish you lived closer I'd hire you to do it. lol
Thank you, I appreciate that.
I wonder if body adhesive, even construction adhesive. would be a better choice. The bolts are holding it down anyway, the rails just keep it in place. Body adhesive can be stronger than welds. Also less chance for rust.
Probably could use 3M Panel bond. For me it is a time factor and I usually don’t have time to wait for everything to cure. Maybe someday I’ll try it.
@@FullRange4x4 Yep that is true, there is a delay to install. But I know some cars use it for the trunk floor, so it is up for the job. Welding definitely makes metal more rust prone, this metal is very thin to start. I also worry it would wreck my linex.
Dont think I'd be using panel bond for the center cross members. Its not a continuous flat surface due to the ribbing of the bed. I'd be okay with Panel bond if all the joints were perfectly flat for maximum surface area for the adhesive to bond to. During the repair I would use weld through primer to help the weld joints stay corrosion free.
Instead of spot welding them can you use a nut and bolt to secure the frame to the bed ?
Sure you could. I know I wouldn’t want to drill all the holes but I get it if you don’t have the means to weld them on.
How you keep the sprayed in bed liner from flaming up while welding?
It’s a really tedious process. Either the bed liner needs removed or I will do a quick tack…let it cool for a few second and then spot weld it. It takes a little practice and the welder has to be dialed in just right to get enough penetration on the tack weld before you spot weld it in.
Where did you get the support rails. I have a 2000 f350 long box. Thanks
Here is my Amazon link to the exact kit I have been using for these.
amzn.to/3vLguoH
@@FullRange4x4 there currently out of stock...dam
@@daverepole9283 I used these as well a few times. These were not available for a while but just saw they are now and will save you $30.
amzn.to/3xsQC1p
@FullRange4x4 I clicked on them and it say currently unavailable
@@daverepole9283 odd.
How did you flip the bed over?
I tip these up by myself. I have plywood and stuff to lay under so I do not scratch anything up. Sometimes I do have the help for that step by most of the time it is just me. I recommend a helper or a good workout routine which I do have in place.
Another option to look into is a DIY rotisserie using a piece of plywood bolted to each end and rolling the bed over.
Good vid but youtube background music blows
Always appreciate the feed back!