Omg seriously! This works right here!! We were literally sitting in the car trying to figure out what to do!!!!! Not starting. Push button not sure what to do. Searching through Google came across this video! Thank you so much! It worked! 💙
Hello there i would like to thank you so so very much for this video because i did what you said and it worked on my chrysler 300....i can't thank you enough...again thank you
Incredible! Start at the 5 minute mark and PRESTO! I can’t believe it actually worked. Thank you Thank you for this video. I was literally stuck trying to figure out the problem. Just replaced my dead battery too so thanks again! Today’s date is Oct. 14th 2022 this is awesome fix 😊
YO! I was working on this issue (starter clicking once and not turning over) and wife came across this video (head super big now) I gave it a knock and it worked. Avoided towing fees. Much appreciated.
My Magnum did the same thing ...just tryed it and it worked...the olny problem is I brought a starter from parts geek thinking it was the starter..I hope I can return the starter back for a refund..now I know it's and ignition problem...thanks bro...
Hi everyone, make sure you dont hit the key... you will break the actuator pin. If the barrel isnt the issue there is a common fault with the 300c that the starter motor exciter wire becomes cruddy and loses a decent connection. Get under the car and make sure the connection is good. It just pulls off/pushes on. This is very common
It worked on my chrystler ! Thank you so much but my only question now is what the real problem is ? & how long will this work until I need to fix whatever problem it is ?
I’m sitting in my Chrysler right now when I do this trick it usually works but at times I acts funny on me. Like now I’m stuck on the side of the road because it decide not to work today. So do think my ignition is finally done done?
Could you help me I have a 2005 chrysler 300c good starter, no turn no start just clicks, fuses look alright, good battery/jumped, tried this trick didn’t get much results so I don’t believe it’s the switch, I tried jumping and switching out the starter fuse, also I’m getting sound from my fuel pump and I’m a bit stumped on what I should do next?
So problem is the actual key cylinder? I have this exact issue I’ve replaced ignition switch and actuator pin still no start…. Imma try this when I get home.
What would you suggest? Water pump, fuel pump, starter, radiator, brand new fuse box, everything's been fixed I don't know why it's not starting but it's not the battery I had a new battery put in and besides it's lighting up its dinging just fine I don't know I'm stumped I changed fuses
Awesome trick. Thanks for the tip. I went to look at a 2006 300c and tried to start with the Booster cable with the owner. But after turning the key to the start position all we got is that clicking noise..? Owner told me a mechanic came and told him it might be the starter? Obviously his battery is dead, i offer him 1250$ I would need to tow it to my house..to figure it out ? What's your opinion ?
Mine doesn't even light up or anything. I just happened to press down on all of my fuses, front, and the car started. I tried it again but it won't start. I have a remote starter that I had put on, could that be an issue?
So my Chrysler 300 has a no crank no start issue, but hitting under the ignition didn’t get it to start. The only times I’ve gotten it to start is by jumping it from the starter relay and throwing gasoline to the throttle body
@@nestorautorepair Jumping the starter relay is only going to activate the starter. Like you said, something is either preventing the injectors from firing or the fuel pump from working. I would check and see if the fuel pump fuse is getting power. He should not have to use gas or starting fluid for the car to run.
Aye bro i changed the rocker arms on my 06 300 and put it back togerher n it cranked just a little bit then stopped now its just like that car? Would this work?
My car did this a week ago took it to the shop they charged me 200 for a new battery it ran for 2 days on the second day I went to start it up after driving it all day it sounded like a lawn mower the check engine light came on and the red lighting bold symbol I cut the car off now it won’t start but will crank
Okay so I need some help. Ive already asked three separate mechanics and they’ve all proven to be useless… They seem to rely too much on their OBD scanner, and when my car wouldn’t give them any codes they were all stumped so I hope someone here can help… Heres the issue, I have an 06 Chrysler 300. Every once in a while Ill try to start it and ill just hear a click and nothin happens… if I try again immediately after Ill get same result. However Ive learned thru trial and error that if I wait for about a minute or so before making another attempt, it will start right up no problem!! Anyone have any idea what could be causing this? It doesnt happen often, but when it does happen its always at the most inconvenient time!! Like when im on a date -.- PLEASE help
2010 300 same issue. Just clicks. Jump from relay just clicks. Hit under key just clicks. Every now and then after turning 50x it will fire. Oh. New starter new battery. New fuse box. Plz help.
@@nestorautorepair I have one more question. Is the WIN’s plug and go or do they need to be programmed? I have a 2010 charger 3.5 same WIN wIth the key. Could I use that WIN in the Chrysler 300 3.5?
I have a 2010 Chrysler 300 and it doesn’t start. I tried this and it didn’t work. The electrical stuff and the beeping comes on but nothing from the engine or any real starting..
Same here. I got the same car and it’s the same year. The anti theft light is on too so I’m thinking my key isn’t getting recognized. Did you end up fixing the problem?
Now this is what needs to go viral !!!! It’s the best! It works!
Omg seriously! This works right here!! We were literally sitting in the car trying to figure out what to do!!!!! Not starting. Push button not sure what to do. Searching through Google came across this video! Thank you so much! It worked! 💙
You’re a life saver bro! Was literally sitting in my car trying to go to work and car wouldn’t start, tried this and it crunk right away
Fixed for my 2006 Chrysler 300!!! Thank you so much bro
You're welcome bro , thanks for your feedback
Hello there i would like to thank you so so very much for this video because i did what you said and it worked on my chrysler 300....i can't thank you enough...again thank you
🙏you're welcome boss ,, thanks for your feedback
you just saved me 500 bucks.... my dude! and i only had to bash it once and now it works like brand new
Thanks for your feedback boss , I'm so glad that my video help you please sub for more
Thanks man, that's exactly what mine is doing. Will update of it works. Preciate it bro.
It worked perfectly man thanks a bunch!!
Mine wouldn't crank. I did this technique and it work. Thanks a whole lot.
You're welcome boss , thanks for your feedback
Thanks man you helped me out alot take care it was a 300 2006 car
You're welcome boss thanks for your feedback
Incredible! Start at the 5 minute mark and PRESTO! I can’t believe it actually worked. Thank you Thank you for this video. I was literally stuck trying to figure out the problem. Just replaced my dead battery too so thanks again!
Today’s date is Oct. 14th 2022 this is awesome fix 😊
You're welcome , thanks for your feedback, make sure you watch the link under this video for the real fix
Sean Pinkney hurry up infested
@@nestorautorepair this not fix what is the fix my friend?
@@nestorautorepair never mind I found the link thank my friend
YO! I was working on this issue (starter clicking once and not turning over) and wife came across this video (head super big now) I gave it a knock and it worked. Avoided towing fees. Much appreciated.
You're welcome boss , thanks to your wife, under this video I have a link for my other video for the real fix
@@nestorautorepair
What’s actual problem to fix
I have the link under this video for the real fix
This really helped me with my crysler 300 2006 this method worked
I'm Glade it did , thanks for your feedback
Now it dont work it was workin for a while now i hit it and no start ?
Wow well under this video I have the link for the real fix
It worked for my 2006 chrysler 300..good looking
You're welcome Anthony , thanks for your feedback
I was telling my self it wouldn’t work I tired it out and did 😂 thanks 🙏 man
Thanks for your feedback , I guess I'm not the only crazy one lamo
Thank you so much. It works!!!
Your welcome
Thanks I have a 2007 Chrysler 300 2.7l but I'm not having this problem but if this ever happens I'll keep this in mind
Thanks sure
Came out from work and this is the first UA-cam video that popped up and what do you know it worked
My Magnum did the same thing ...just tryed it and it worked...the olny problem is I brought a starter from parts geek thinking it was the starter..I hope I can return the starter back for a refund..now I know it's and ignition problem...thanks bro...
You're welcome , check my link below for the real fix
@@nestorautorepair okay..
Yes
Thank you!
You're welcome!
Thank you 🙏🏾
✅🙏
Hi everyone, make sure you dont hit the key... you will break the actuator pin.
If the barrel isnt the issue there is a common fault with the 300c that the starter motor exciter wire becomes cruddy and loses a decent connection. Get under the car and make sure the connection is good. It just pulls off/pushes on. This is very common
Yes
Where is that
@@krich4972 under the car more or less off centre to the engine.
It worked on my chrystler ! Thank you so much but my only question now is what the real problem is ? & how long will this work until I need to fix whatever problem it is ?
Hi you're welcome and thanks for your feedback , I believe I have the link under this video for the real fix
Cheers feller
Thanks
I love you so much
Thanks me too! Thanks for your feedback
Life saver
Thanks boss
It’s crazy how that actually worked.
You see thanks for your feedback , I just save you a towing
Perfect.
That’s not gonna always work gotta fix the ignition system hood job tho man thanks for sharing
I’m sitting in my Chrysler right now when I do this trick it usually works but at times I acts funny on me. Like now I’m stuck on the side of the road because it decide not to work today. So do think my ignition is finally done done?
Yes I believe in this video I have the link of the fix
Good morning hopefully this works for me because my car is completely dead
Gm Yes sir good luck
good
My 2012 Chrysler 300s is having the same issue & I’m hoping I don’t waste my money on a new starter
Thanks for the video. Can you send me the link for the light u are using .
Sure let me check
Hi I don't recommend the one I was using , here is the link for the one I use now
amzn.to/3LIcW8H
@@nestorautorepair thanks for your reply...sorry I meant to write the link for the car LIFT you used in the video.
Lol www.ebay.com/itm/234361649303?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=22s_t2shqa6&sssrc=2349624&ssuid=KQN2XEv1TDC&var=&widget_ver=artemis&media=COPY
Could you help me I have a 2005 chrysler 300c good starter, no turn no start just clicks, fuses look alright, good battery/jumped, tried this trick didn’t get much results so I don’t believe it’s the switch, I tried jumping and switching out the starter fuse, also I’m getting sound from my fuel pump and I’m a bit stumped on what I should do next?
Have a mechanic check it for you
this guy is a geneie
Thanks boss
Do you have to hit it all the time your going to start it
No , under this video I have the link for the real fix
Hey bro this worked but after a few times of working it didn’t work for me no more. Do I have to fix it permanently now?
I have a video for the real fix , I think under this video I have the link
Unintentional safety feature brother.... 😂
Yesssss
LOL😂😂 Yea oohkaaay!😅
So problem is the actual key cylinder? I have this exact issue I’ve replaced ignition switch and actuator pin still no start…. Imma try this when I get home.
Dash lights up all the monitors coming ON?
@@nestorautorepair yes
What about 2011 push start chrysler what do I do in that situation
In this case more likely the starter is bad if the battery is full and not low , try putting it on neutral and try to start it
Question witch part needs to be replaced the key ignition or the electrical part behind the key ignition
Hi yes I believe I have a link under this video that show you the fix
ua-cam.com/video/t2bhsK6EBmc/v-deo.html
I bout to try this hope it works lol
Best luck boss
Did it work
Yes
Will that work with a key fob tho cause mine dont have a key
No
What would you suggest? Water pump, fuel pump, starter, radiator, brand new fuse box, everything's been fixed I don't know why it's not starting but it's not the battery I had a new battery put in and besides it's lighting up its dinging just fine I don't know I'm stumped I changed fuses
Dam it I went through a lot of hassle I'm going to try that and see what someone put everything back I hope it works homie
Ok boss good luck
I see no issue. Makes it harder to steal lol
Lol
Premo . Thats f crazy. 😂
Yes did it work ?
Awesome trick. Thanks for the tip. I went to look at a 2006 300c and tried to start with the Booster cable with the owner. But after turning the key to the start position all we got is that clicking noise..? Owner told me a mechanic came and told him it might be the starter? Obviously his battery is dead, i offer him 1250$ I would need to tow it to my house..to figure it out ? What's your opinion ?
Try putting power to the starter first or try my trick lol
Will do, Thanks for the reply.@@nestorautorepair
If u still want the c300 I got one in good shape good condition in it runs but miner fix
Mine doesn't even light up or anything. I just happened to press down on all of my fuses, front, and the car started. I tried it again but it won't start. I have a remote starter that I had put on, could that be an issue?
Mmm I will say your problem is a bad relay or a bad fuse box where you press it and it start try hitting it there at the fuse box
No lights, battery?
So my Chrysler 300 has a no crank no start issue, but hitting under the ignition didn’t get it to start. The only times I’ve gotten it to start is by jumping it from the starter relay and throwing gasoline to the throttle body
Wow sound like the inigtion is not opening the injector and not sending the signal to the starter
@@nestorautorepair Jumping the starter relay is only going to activate the starter. Like you said, something is either preventing the injectors from firing or the fuel pump from working. I would check and see if the fuel pump fuse is getting power. He should not have to use gas or starting fluid for the car to run.
Correct
Aye bro i changed the rocker arms on my 06 300 and put it back togerher n it cranked just a little bit then stopped now its just like that car? Would this work?
Mmm 8m not sure , when you say rocker arm the one I side the engine ?
@@nestorautorepair passenger side
Ok
How about if it is a start stop engine?
You will need to take the starter out and test it off the car
I have a 05 dodge Magnum r and r moter ...change starter new battery won't start
How do you fix the problem so you don’t have to hit it??
How's the pup
Big
I have a 2012 Chrysler to push start no crank no start what do I do?
I'm having same issues 2013 Chrysler did u figure it out?
The 2012 doesn’t have a key!! I hear something spinning though !!!im guessin it’s the starter on my 2012 300
If is a push star then yes it can be your starter , but to be sure you can add power to the starter and see if it crank
What about If is push start
Maybe starter
@@nestorautorepair thanks it was the. Starter
i have a 2019 charger and its not starting I swapped the starter fuse and it started and after that it dose not start
Wow sorry to hear that , well in a 2019 it charger it can be many thing , like is newtral safety switch , put the car in newtral and let me know
Does that mean a bad starter?
@@nestorautorepair will try that tomorrow morning will let you know thanks for the response!
@@nestorautorepair I tried putting it in neutral and still nothing.
My car did this a week ago took it to the shop they charged me 200 for a new battery it ran for 2 days on the second day I went to start it up after driving it all day it sounded like a lawn mower the check engine light came on and the red lighting bold symbol I cut the car off now it won’t start but will crank
Dam
I’m having the same exact problem, did you find a solution?
Yes under this video I have the link for the fix
its not the calendar itself... its the electric switch behind it
Ok
@@nestorautorepair cylinder sorry... spell check really goofed on me
Lol I still knew what you mean
What if its push start?
Not the same fix
Can you do it with a push start
Okay so I need some help. Ive already asked three separate mechanics and they’ve all proven to be useless… They seem to rely too much on their OBD scanner, and when my car wouldn’t give them any codes they were all stumped so I hope someone here can help…
Heres the issue, I have an 06 Chrysler 300. Every once in a while Ill try to start it and ill just hear a click and nothin happens… if I try again immediately after Ill get same result. However Ive learned thru trial and error that if I wait for about a minute or so before making another attempt, it will start right up no problem!!
Anyone have any idea what could be causing this?
It doesnt happen often, but when it does happen its always at the most inconvenient time!! Like when im on a date -.- PLEASE help
I will say your starter is going bad.
Owned a 2005 and 2007 with the same problem. It was the starter for both.
Shit does not work on my car theres a recall anyway right
Not sure about recall
2010 300 same issue. Just clicks. Jump from relay just clicks. Hit under key just clicks. Every now and then after turning 50x it will fire. Oh. New starter new battery. New fuse box. Plz help.
Wow I will still say until problem
@@nestorautorepair I don’t understand that comment.
I mean to say the inigtion will be your fix
@@nestorautorepair I have one more question. Is the WIN’s plug and go or do they need to be programmed? I have a 2010 charger 3.5 same WIN wIth the key. Could I use that WIN in the Chrysler 300 3.5?
No need programing
What is the permanent fix to this?
Hi I believe under this video I have the links for the fix on my next video
@Nestor Auto Repair thanks I got the link. Great info 👍 👌
I have a 2010 Chrysler 300 and it doesn’t start. I tried this and it didn’t work. The electrical stuff and the beeping comes on but nothing from the engine or any real starting..
Same here. I got the same car and it’s the same year. The anti theft light is on too so I’m thinking my key isn’t getting recognized. Did you end up fixing the problem?
so how do i fix it 🤣 so i dont have to keep doing this
I have the real fix , the link is under this video
What if it was push button ?
Maybe the starter is bad
This not fix What is the fix??
Never mind I found the link. Thank you
Ok
Jaja
Mine is blowing a fuse
Didn’t work for me🤔
Didn't work for me
This meant this will not be your fix then
@@nestorautorepair its wiring problem my senior fix this
didn't work
Sorry then you have a bigger problem
Cap I tried it a few times
Did it work ?
No
Gracias
BS
Thanks