Great job and excellent explanation! It’s been driving me nuts trying to fix the problem. Almost ready to buy new key fobs and have reprogrammed. Thanks to your 2 videos I’m definitely gonna save money and can fix myself. Thanks bro well done 🙏🏼 and I’ll definitely share this to others that have same issues
Great video, thanks for putting it up, it helped me a ton. 06 Chrysler 300c 199,878. My wife says buy a new car, but the 300 has never let me down. So I'm representing till then.
So glad I saw your video mine is 200 more difficult to access the cylinder assembly had to cut through the plastic to remove the lock cylinder that got stuck. Thanks for a clear close up of each parts & how to do it and change the defective part!
I'm glad I found your video... was just about to buy a new starter for my 2006! After I saw your other video where you hit the dash to start it, I'm keeping the original starter... just replacing the broken piece. Thanks!!
Great videos bro!! Very detailed. Great explanations. Well done!! Helped me figure out how to fix my 300 and your other video helped me figure out how to start it until I get the parts and can replace the ignition switch. Thank you!! 💯🙌
Great video. First off God bless you brother. My niece has a 2005 Chrysler 300 3.5l that shuts off randomly. Could be a pit stop at store and car won't start or crank. Also car would just quit on roadwhile driving. No engine lights on when this happens. I checked the starter relay, seems good. Starter works fine. Tried bypassing the starter relay but car just cranks but won't fire. The fuel pump does sound like it builds up but doesn't fire. So when car acts up, it doest start through bypassing relay but when car starts, it seems to run perfectly
Working on a 2006 Chrysler 300.. jo start from they key. I can jump relay and it turns s over. No spark nor does the fuel pump kick on.. also the lightning bolt is flashing.. could this issue cause those as well??
I replaced both of them parts and still doing the same thing I tried jumping the starter still nothing and we turned the moter so we know it’s not locked only thing left to replace starter it’s not clicking or nun
Hi, so we have a 2005 Subaru Outback 3.0 that is doing the same thing now after changing the fuel pump, alternator and starter and still no crank or start but I get all the lights in the dash when I turn the key on. Do you think it may be the starter switch and relay? I have not pulled it apart yet and just got a relay tester. Thanks
Hi do this get a 19mm socket and try to rotate the engine to make sure the engine is not lock up , also you can put the key ON and touch the small cable to the big cable at the starter and see if it crank , here is a link of this car how I got it to start before fixing it ua-cam.com/video/zgGQmGkREy4/v-deo.html
Hi Nestor i have a cuestion. my daughter have a dodge charger 20 11 after overheating the car wont turn on, i rotate the crank shaft manually and it turn complete but is hard to rotate it,whe i try to start the car with the fob key it make a noise coming from the starter i replaced the starter but the car still the same.what do you recommend bro? Thanks in advance.
I have a 2006 300 it would start with key but die out. I had a aftermarket remote start put in it professionally. If I started it with the remote start it would run fine. I took the remote start out thinking maybe it was causing a problem. Now the car won’t turn over at all. Key fob still unlocks locks panic pops trunk but dash lights up the security light flash’s and the lighting bolt light comes on and won’t crank over. Had a lock smith out today to trying reprogram the key and cut me a new one nether worked. And I scanned it and I have a code for invalid key skim code I’m lost here can’t wrap my head around any help would be greatly appreciated
Ok got it so when you remove the alarm there is a wired by the steering column that was original cut so you need to connect this withe back make sure is the same color on both ends,, if you just unplug the alarm or just remove the fuse , the car will not start untill you reconnect the wire that was cut
I have a 2006 Chrysler 300 c hemi and my car started up and then just cut off all lights work even the horn, the fuel pump is engaging but the car doesn't make a single noise when I got to start it. Could this be my problem? I tried the relay switch I also switched it with the horn fuse and it still didn't start. I even took out the #5 and #29 fuse out my trunk fuse box for my anti theft and my car still is not starting . Any Other Suggestion?
Im looking at one thats a 5.7 guy told me it shut off while idling. Said he turned it on it shaked then shut-off again he's giving me a deal but id want to make that deal worth it by knowing what to do.
@@nestorautorepair yes and yes. I’ve replaced bcm, starter, hsm, esm, all oils and fluids and filters, starters, battery, all fuses and relays, pcm etc and still nothing.
@@danellison1555 hey bro what was your problem I really need help I have p1df3 code idk if I need a battery charge it starts right up with a jump no problem
I replaced both and still no crank no start. I even tried the starter relay hack 30 n 87 still nothing my last guess my solenoid gone bad. All fuses and relays are good.
@@nestorautorepair yes the engine is free I put marvel mystery oil in each cylinder let it sit for a little bit then turned the engine by hand and did an oil change
I have a 2018 Chrysler 300 it won’t crank or start. I replaced the motor of the windshield , disconnected the battery for that and once I put everything back in place my car doesn’t want to turn on . But the lights do
@@nestorautorepair 2007 Chrysler 300, I was able to start it using the paper clip trick, but i wasn’t able to turn it off with my key. I had to pull out a fuse to turn it off.
@@nestorautorepair is it possible for me to fix it myself if I can buy the parts? I’m not a simp, I’m a fast learner. And UA-cam is a good platform to “do it myself”
@@nestorautorepair it’s just that I called some auto shops and they said it’s something that needs to be taken to the dealer. I’m pretty sure there’s a way to do it myself without having to depend on a stupid dealer.
Had my 300 for 5 years never failed me only water pump once nd saw first video💯🙏🙏thank u so much for everything got to fix asap
You're more than welcome , thanks for your feedback
Man oh man, saw the first video, then you came back with the fix!, Fantastic!! Thanks
Thanks boss yes
Great job and excellent explanation! It’s been driving me nuts trying to fix the problem. Almost ready to buy new key fobs and have reprogrammed. Thanks to your 2 videos I’m definitely gonna save money and can fix myself. Thanks bro well done 🙏🏼 and I’ll definitely share this to others that have same issues
Thanks boss
Hi Nestor the banging dash with key in worked on my 2007 300c am still smiling thank you so much for sharing your knowledge bless you
You're welcome boss thanks for taking the time for the feedback
Great video, thanks for putting it up, it helped me a ton.
06 Chrysler 300c 199,878. My wife says buy a new car, but the 300 has never let me down. So I'm representing till then.
So glad I saw your video mine is 200 more difficult to access the cylinder assembly had to cut through the plastic to remove the lock cylinder that got stuck. Thanks for a clear close up of each parts & how to do it and change the defective part!
You're welcome boss thanks for your feedback
I'm glad I found your video... was just about to buy a new starter for my 2006!
After I saw your other video where you hit the dash to start it, I'm keeping the original starter... just replacing the broken piece. Thanks!!
You're welcome sir , thanks for your feedback
What's the broken piece?
I believe I show it on the video
Great videos bro!! Very detailed. Great explanations. Well done!! Helped me figure out how to fix my 300 and your other video helped me figure out how to start it until I get the parts and can replace the ignition switch. Thank you!! 💯🙌
You're welcome boss thank you for taking the time to give me a feedback 🙏
What exactly is this procedure for a no crank no start?
My next project! Thank you so much for the video 🍻🍻🍻
You're welcome
Great job really helped me out.Thanks , bro
Great job really helped me out.Thanks bro
Great video very helpful thanks! Blesdings
you're welcome , thanks for your feedback
Great video by the way and very detailed.
Thanks for your feedback Angela
Huh, ok, thank you!
You welcome Angela
Great video. First off God bless you brother. My niece has a 2005 Chrysler 300 3.5l that shuts off randomly. Could be a pit stop at store and car won't start or crank. Also car would just quit on roadwhile driving. No engine lights on when this happens. I checked the starter relay, seems good. Starter works fine. Tried bypassing the starter relay but car just cranks but won't fire. The fuel pump does sound like it builds up but doesn't fire. So when car acts up, it doest start through bypassing relay but when car starts, it seems to run perfectly
Thanks boss 🙏 sounds like crank sensor and fuel pump , you are having two problems , when the fuel pump heats up it stops sending gas
When the car wont start the dash and radio seems to work fine. Everything looks good Just no crank when turning key
Does the same parts work for the 300c ? Hemi ?
Hay is their a special switch to start car if youlost key fob to a 2019 Chrysler 300
Thx man
Your welcome boss
Hi, my friend has an Chrysler 300
She can not find key ignition for her car. How can we find this part? Please help
Working on a 2006 Chrysler 300.. jo start from they key. I can jump relay and it turns s over. No spark nor does the fuel pump kick on.. also the lightning bolt is flashing.. could this issue cause those as well??
Sound more like bcm
Good work, you can save time just remove those 3 screws he showed, push the assembly back wiggle it out by hand.
What is that part called?
I replaced both of them parts and still doing the same thing I tried jumping the starter still nothing and we turned the moter so we know it’s not locked only thing left to replace starter it’s not clicking or nun
I have a 2010 and it power is on not turning over though, can’t figure out what fuse 33 is in the trunk fuse box, do you happen to know
No I don't know about that fuse , well try to jump the starter from under the car
Hey is they any way I can get in contact with you ? Wanna see if you still able to put the lower springs on
Yes sure
Hi, so we have a 2005 Subaru Outback 3.0 that is doing the same thing now after changing the fuel pump, alternator and starter and still no crank or start but I get all the lights in the dash when I turn the key on. Do you think it may be the starter switch and relay? I have not pulled it apart yet and just got a relay tester. Thanks
Hi do this get a 19mm socket and try to rotate the engine to make sure the engine is not lock up , also you can put the key ON and touch the small cable to the big cable at the starter and see if it crank , here is a link of this car how I got it to start before fixing it
ua-cam.com/video/zgGQmGkREy4/v-deo.html
@@nestorautorepair ok, thank you, I will let you know what happens. Both our vehicles went down at the same time. Uuuuggg🙄
Wow ok best luck
What causes no crank no start in a 2005 chrysler 300 after a TIPM service
Hi Nestor i have a cuestion. my daughter have a dodge charger 20 11 after overheating the car wont turn on, i rotate the crank shaft manually and it turn complete but is hard to rotate it,whe i try to start the car with the fob key it make a noise coming from the starter i replaced the starter but the car still the same.what do you recommend bro? Thanks in advance.
Sounds like coolant got in the piston and now the engine can't compress it , remove the spark plugs and confirm it
Perhaps you can tell me why my remote start dosnt work after replacing this!?
Mmm check all your connection
You never said what the name of this part is....is this part of the ignition system?
Did this 300 have ignition issues?
Yes igntion switch , I believe I show the part I replace
I have a 2006 300 it would start with key but die out. I had a aftermarket remote start put in it professionally. If I started it with the remote start it would run fine. I took the remote start out thinking maybe it was causing a problem. Now the car won’t turn over at all. Key fob still unlocks locks panic pops trunk but dash lights up the security light flash’s and the lighting bolt light comes on and won’t crank over. Had a lock smith out today to trying reprogram the key and cut me a new one nether worked. And I scanned it and I have a code for invalid key skim code I’m lost here can’t wrap my head around any help would be greatly appreciated
Yes hello was the system only remote start or a two way alarm as well ,?
@@nestorautorepair it was a alarm and remote start
Ok got it so when you remove the alarm there is a wired by the steering column that was original cut so you need to connect this withe back make sure is the same color on both ends,, if you just unplug the alarm or just remove the fuse , the car will not start untill you reconnect the wire that was cut
what is the name of the 2 parts you replaced?
At the end I only replace one
I have a 2006 Chrysler 300 c hemi and my car started up and then just cut off all lights work even the horn, the fuel pump is engaging but the car doesn't make a single noise when I got to start it. Could this be my problem? I tried the relay switch I also switched it with the horn fuse and it still didn't start. I even took out the #5 and #29 fuse out my trunk fuse box for my anti theft and my car still is not starting . Any Other Suggestion?
Have you seen my video before this fix how I was able to start the car , I believe the link is below this video
Thank you! It’s fixed it was actually my starter wire it came out. Just needed to be clipped back together. It started right up.
Nice!!
Heyy I need some help with my Chrysler 300M it would not start but the battery is new
Is the engine turning over ?
Like
Im looking at one thats a 5.7 guy told me it shut off while idling. Said he turned it on it shaked then shut-off again he's giving me a deal but id want to make that deal worth it by knowing what to do.
Oh ok well good luck boss
Can you help me? I have a 2017 Chrysler 300. The push start only stays in off mode no matter what. No crank no start.
Make sure you have good battery charge , also is the remote battery any good?
@@nestorautorepair yes and yes. I’ve replaced bcm, starter, hsm, esm, all oils and fluids and filters, starters, battery, all fuses and relays, pcm etc and still nothing.
Did you fix?
Yes
@@danellison1555 hey bro what was your problem I really need help I have p1df3 code idk if I need a battery charge it starts right up with a jump no problem
I replaced both and still no crank no start. I even tried the starter relay hack 30 n 87 still nothing my last guess my solenoid gone bad. All fuses and relays are good.
Does the inition turn ON?
@@nestorautorepair yes
HMMMM
any update? ground wire?
@@moexus bad starter
Hey mine's doing the same exact thing no crank no start do you live nearby
I’m in sterling va google Nestor auto repair
new starter in, it clicks but no start, can this be a cause of click no crank?
Yes sir
Have you try to rotate the engine by hand ? Make sure the engine is not lock up
@@nestorautorepair yes the engine is free I put marvel mystery oil in each cylinder let it sit for a little bit then turned the engine by hand and did an oil change
Ok check your starter relay , but I think just take the key switch apart and see inside if the little leg inside is broker
@@nestorautorepair ok im going to try that, thanks
My 2017 Chrysler 300 push start only stays in off mode. No acc or start :(
Wow that's suck
I just put a brand new battery in my 2007 dodge charger now it doesn’t even wanna crank please help I’ve tried everything
Fuse box
Where are you located
Sterling va
g.co/kgs/mmaibN
I have a 2018 Chrysler 300 it won’t crank or start.
I replaced the motor of the windshield , disconnected the battery for that and once I put everything back in place my car doesn’t want to turn on . But the lights do
So the car was good untill you work on it replacing the wiper motor ?
@@nestorautorepair hey I disconnected my battery on my 2017 Chrysler 300and it didn’t start when I went to go start it again
2008 challenger won’t start will not turn over
Try hiting the starter , or check if the starter is getting power
I got an emergency question. I’m having the same problem with the no crank no start
What car ?
@@nestorautorepair 2007 Chrysler 300, I was able to start it using the paper clip trick, but i wasn’t able to turn it off with my key. I had to pull out a fuse to turn it off.
Sound like your key cylinder is broken inside just like this one
@@nestorautorepair is it possible for me to fix it myself if I can buy the parts? I’m not a simp, I’m a fast learner. And UA-cam is a good platform to “do it myself”
@@nestorautorepair it’s just that I called some auto shops and they said it’s something that needs to be taken to the dealer. I’m pretty sure there’s a way to do it myself without having to depend on a stupid dealer.
Screw in the top right just change my out
Good!!!
2008 challenger
Ok
Minute 4:56!
Oio
Ok
are all the comments bots? copy paste responses are lame AF 👎🏻👎🏻