Failure Mode Recall - M-Series Troubleshooting

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 36

  • @eleanoreperry1231
    @eleanoreperry1231 Рік тому +14

    Purchased: August 2023 - still works GREAT!I ua-cam.com/users/postUgkxxsUnXhGsSJLim_XnMHyQK0u3XVaW-CGn live in a studio and during the summer it gets scorching hot - really old building with no ac units. I can’t express how EASY it was to install. This unit has been a life savior during the summer and some days during other seasons where it can still be a bit warm at night. In this small place is my friend, a husky, poodle mix and myself. We need AC - lolI don’t use the dehumidifier option - I’m not sure if it will leak in my house, since I did not install the small draining hose that came with it. May look into it late but I don’t worry about much humidity in the apartment. I don’t understand why the negative reviews since all things mentioned, I personally did not find issues with. Definitely worth it!

  • @ТатьянаАлександрова-з3ш

    *Used to supplement the up stairs when it gets hot outside this works very well and **Fastly.Cool** Also works good when the upstairs gets too hot in the Winter from the heater.*

  • @montelorne
    @montelorne 2 роки тому +3

    I can get into failure mode recall, but when I press the on off button, I don’t get the flashing lights and beeps. Any idea why this would happen?
    What’s really strange is after I reset the remote control to get out of failure recall mode and I guess erase whatever error messages should’ve shown up, the heat began working again....

    • @sheenaknowles5549
      @sheenaknowles5549 Рік тому +1

      Exactly the same happened to me! I only persisted after reading about your experience, so thanks!

    • @montelorne
      @montelorne Рік тому

      @@sheenaknowles5549 Gotta love UA-cam!!

  • @williamquintero3387
    @williamquintero3387 2 роки тому +1

    Can you do a video on troubleshooting codes for the model MUY-A24NA

  • @superCisco
    @superCisco 11 місяців тому

    I have no lights at all. I'm receiving power to the indoor and outdoor unit but it seems like the RF reciever isn't turning the unit on? Any recommendations there??

  • @dcgunman
    @dcgunman 2 роки тому

    I am trying to see if my remote works with Mitsubishi split unit PKA model unit. My remote power On/Off button does not turn the unit on & off or doesn’t control any of the functions. So I thought I would try this troubleshooting videos see if it’ll reset. Nothing. The model number on my split unit is PKA-A36KA7. The remote I’m using looks exactly like the one in the video. The number on the back of the remote is KM18G 040C. My other issue is this unit was off with a flashing green led, so I had to go on the rooftop unit to reset the disconnect to get rid of the flashing green led. Once reset the light is solid green but I still have no control with my remote. That’s the reason I used your video to see if there is anything wrong with the inside/outdoor unit or the remote. I put new batteries in the remote. I did the steps 3 times and I still have a solid green led. No flashing or beeping noise. Does that mean my unit is good? No issues? Thank you.

  • @rod4923
    @rod4923 2 роки тому

    I have one where the indoor doesn’t come on . There is power going to the inside unit . Will this failure mode be the issue or is it something else . Thx

  • @helpy852
    @helpy852 3 роки тому

    My voltages were fluctuating because of which the light was blinking 14 times i simply followed the tutorial and it solved. Thanks alot

  • @vrihenarora3731
    @vrihenarora3731 3 роки тому

    Can u pls tell me what to do as my indoor unit is beeping 14 times and repeating this pattern

  • @Refresh636
    @Refresh636 3 роки тому

    After doing this I had the "room temperature thermistor" error and after seemingly fixing it now my remote some times wants to work and other times doesn't. Sometimes my unit will be on working then i'll try to change a setting on the remote and i get no beeps or any input until i turn off and on the unit via power button on remote

  • @DerickHo
    @DerickHo 3 роки тому +1

    after enter Failure Mode Recall, my 1 is 1 blink with beep, 2.5 sec off .. this condition is not inside the table..

  • @memoversion4494
    @memoversion4494 3 роки тому

    Indoor unit continue blinking not on unit what reson & how to repair sir

  • @Lino-Logs
    @Lino-Logs Рік тому

    I have a slow beep like once every 5 seconds
    Didn’t see any code for that. Any ideas ?

  • @spurmarks
    @spurmarks 5 років тому

    Didn't work for me. Of course it's off warranty. Not sure if the $75.00 replacement will work or if I need to do something to get them to sync.

  • @NM_stoles.
    @NM_stoles. 4 роки тому

    Can this remote b used for srk12cm-6 ac plzzz
    If not plz suggest the correct remote

  • @innosenciazhishu362
    @innosenciazhishu362 3 роки тому +2

    THANK YOU VERY MUCH SIR, ITS WORKING ON ME..GOD BLESS YOU

  • @zool1956
    @zool1956 3 роки тому

    Works! On a 20+ year unit 👍👏🏻

  • @JP-ks9nh
    @JP-ks9nh 3 роки тому

    Everytime i go to turn my unit on the controller flashers for at least 30 seconds .

    • @MitsubishiHVAC
      @MitsubishiHVAC  3 роки тому +1

      Customer Care is just a phone call away: 1-877-311-1425. Our hours are Mon. - Fri. (8am - 7pm) EST

    • @JP-ks9nh
      @JP-ks9nh 3 роки тому

      @@MitsubishiHVAC I’m in Australia. Unit works fine though .

  • @draconightwalker4964
    @draconightwalker4964 4 роки тому +1

    hi mate, thanks you very much for this, i have been able to diagnose my dodgy unit down to having a dead room temp thermistor. two techs could not figure this out nor did they know about the failure mode recall

  • @technicalwork4551
    @technicalwork4551 2 роки тому

    Sir trane Vrf error code discussed

  • @kla3410
    @kla3410 2 роки тому

    Thanks for your help

  • @CleberGrossl
    @CleberGrossl 2 роки тому

    Thanks!!!!!!!!!!!!!!!!!!!!!!!!! Its working!!!

  • @roxanneabejuela6432
    @roxanneabejuela6432 4 роки тому

    is it possible to remove the beep sound? every function i do, it beeps.. i want that off.

    • @mitaliagarwal5511
      @mitaliagarwal5511 3 роки тому +1

      and mine somehow has stopped beeping.. i need it to beep again!

  • @ubaldovazquez9143
    @ubaldovazquez9143 4 роки тому

    How to change celsius to fahrenheit in mitsubishi w001cp r61y23304

  • @maggieliem7711
    @maggieliem7711 5 років тому +1

    IT WORKS! Thank you!! You just wiped all my sweat off

  • @aHmeDKWT
    @aHmeDKWT 4 роки тому +1

    Thank you so much.. 🙏🏼

  • @palomahealing5073
    @palomahealing5073 5 років тому

    Thank u...You saved my a##! I couldn't turn the damm thing off, it went blank!