I have a Mitsubishi MrSlim R410A model MUY-D30NA. It’ll start working but then it kicks off and the light starts blinking three times. I’ll go up to the unit on the roof and there’s no lights showing but there is power going into it. Would that be a bad board? I’ve had the mini split for over 8 years and this is the first time I ever had any problems with it. Any help would be appreciated.
I have a MXY-3A28V condensing unit .The indoor unit displayed 5 blinks and outdoor 2 Red flashes.i checked the compressor and it was fine.i changed the power board any yet the system does not work.The compressor comes on for 06 seconds and shuts off.Could you help me with this.
If the power board shorting is a common problem, why is the board designed that way? You didn't explain the underlying cause of the short. What is shorting? A transformer? A capacitor? A power transistor? The bridge? Which is it? If the power board is shorting, there is a reason. We need to know the reason if the underlying cause is to be fixed.
Do you thing normal peoples and technicians knows how to troubleshoot an electronic board? Resistance can be check only with one leg out of the board with knowing value of the resistor in ohm. So please just say the board is bad, change it !!!
where do you check your resistance on the power board? is it at the terminals where you removed the incoming power wires?
I have a handheld oscope. A video on wave forms would be great
I have a Mitsubishi MrSlim R410A model MUY-D30NA. It’ll start working but then it kicks off and the light starts blinking three times. I’ll go up to the unit on the roof and there’s no lights showing but there is power going into it. Would that be a bad board? I’ve had the mini split for over 8 years and this is the first time I ever had any problems with it. Any help would be appreciated.
Why do you make it near impossible to access the power board on these things???
I have a MUZ-D36NA-1, I REPACSED THR POWER BOARD AND THE UNIT BURNED OUT THE NEW BOARD. CAN YOU HELP?
Is this the same for the MITSUBISHI CITY MULTI?
After paying top dollar for your equipment there should be no shorted boards , this makes me rethink what system to buy.
Bought mine and failed at 33 days...Now I am here.
@@G_Zero127 It is a good idea to instal power surge protector .
Does the noise filter board keep the unit running quieter?
I have a MXY-3A28V condensing unit .The indoor unit displayed 5 blinks and outdoor 2 Red flashes.i checked the compressor and it was fine.i changed the power board any yet the system does not work.The compressor comes on for 06 seconds and shuts off.Could you help me with this.
Did you manage to get this problem solved?
Swapped out the compressor 👍
Sounds like u had power surge, replace all tge boards + install surge protector to protect it in the future occurrence from repeating
Hi Nice channel
I have Mitsubishi heatpump which heats up tp 30 minutes & upper green led blinks 5 times repeatedly plz help
Call certified mitsubishi hvac tech or company
this is a great presentation please keep them coming
Great information
Thanks for the video =)
If the power board shorting is a common problem, why is the board designed that way? You didn't explain the underlying cause of the short. What is shorting? A transformer? A capacitor? A power transistor? The bridge? Which is it? If the power board is shorting, there is a reason. We need to know the reason if the underlying cause is to be fixed.
Q. C. Is going downhill as is everything else greedy corps.!
Hi
Do you thing normal peoples and technicians knows how to troubleshoot an electronic board? Resistance can be check only with one leg out of the board with knowing value of the resistor in ohm. So please just say the board is bad, change it !!!
Hi