You need to disable VRR / Game-Motion / 120hz modes It needs to run at native 60hz with 16ms refresh, otherwise you will seriously gimp the local dimming, resulting in poor HDR. Btw huge props to you my friend! Reducing contrast in HDR I thought was a cardinal sin, but it turns out as you point out, that reducing contrast with HGIG, gives the advantage of hard-clipping the peak brightness, and then matching your contrast to fit with it, so you don't clip any highlights (which you do at 50 contrast) On my QN95A I need contrast reduced to around 39, to avoid any clipping of White, red, green, blue, cyan, magenta. I specifically chose the 75" to get 1000 dimming zones, achieving much more localized control of contrast. Whereas the QN90B 65" only have 720 dimming zones, worse PQ eotf tracking, lower contrast, lower peak brightness in real scenes etc etc. (Rtings)
I just got a 65 QN95A as a gaming TV as I got a massive discount on it. Looks amazing, much more pop than my Panasonic OLED TV. Some blooming, mainly on loading screens in games but this TV gets REALLY bright!
For QN90A - but applies to any QLED in broard terms. This is Samsungs aporoach with their locally dimmed QLED's - due to LCD lifted blacks the image will appear dull and washed out, which is then 'corrected' by overly clipping the colors with too high contrast - making the image pop regardless of poor contrast ratio, - but the image is also much much brighter than the PQ EOTF. by reducing contrast below clip level, your image will look even duller and matte - that is until you start reducing shadow detail, obtaining real black - allowing you to actually reduce contrast below clip level without the image appearing washed out. Then a new problem arises, the image is now much darker than PQ EOTF, which then has to be corrected by increasing ST.2086 until you gain the correct amount of brightness. +1 ST.2086 -2 Shadow detail 39 contrast No HGIG. No 120hz mode No Freesync -As these will heavily impact local dimming negatively, because of how the image will refresh much faster, reducing the amount of time the local dimming processing can work with each frame. Simply running -2 ST. 2086 Will not get you true black, and will also overly darken the midtones. An image that in many instances will seem overly dark. - and then comes the trap that many fall into, attempting to regain correct brightness by running highly clipped contrast at 45 - 50. This will give an overly dark and contrasty image, with overly bright blown out highlights and overly dark midtones. In one scene your screen is way too bright, and in the next your screen is overly dark, a real paradox. If you want your QLED to hit as close to an OLED as possible (though not entirely achieveable) use my approach, - use the PS5 UA-cam app, where you can get loads of test patterns to adjust game mode. These settings will only work for QN90A game-mode. +1 ST.2086 -2 Shadow detail 39 contrast
Thankyou for this finally found a very useful comment on UA-cam, you fixed my TV for ages trying different settings I couldnt find one that really worked.....yours is spot on...thanks again
thanks! I like these settings a lot on my qn90b. IDK if the picture is "correct" but I get that "wow this scene looks good" impression more often with these settings than stock game mode and I don´t feel like I´m missing out by not running in movie mode instead. 120hz movie is okay input lag wise but I think it´s still a bit laggier than game mode.
@@LP-mh6ri you can play around with contrast as you please. You can also try -2 shadow detail +2 ST2086 With contrast being a slider you can play around with, 39 might be overly conservative for your taste. Above 45 and it begins to look criminally clipped though.
Man you are a legend haha! I Play all these years with, always searching for the best calibration and never found one that satistifying me, and this one you made, its great! I have an Q80A but want to buy the QN90B or QN90C, and even in the Q80A works very well. I let the constrast in 43, i think works best for a less powerfull television! Thansk man! (Sorry for any mistakes in the english, I am braziliam haha)
I learned how to calibrate my TV watching some of your videos and you’ve always been great with your information. I have a QN90A and since it’s less bright than your TV I had to go to 44 for brightness. Otherwise your settings are very close to mine. I also agree with what you say about sharpness. On my TV I found 10 was a bit high but 8 seemed to give my picture good clarity
QN90A (maybe it also work for QN90B): On my Game Modes i´m using - 2/-3 bt1886 Gamma and st2084 -2 /-3 (is more close to the curve) because it also help to eliminate some of the pulsaring backlight issues with loading icons and stuff like that. And beside of that, it looks more correct to the standard even with the sdr curve (not flat gamma with local dimming high) it looks natural on testpattern with faces compared to calibrated movie mode. SDR ives u a HDR Feeling and there is no need to force SDR to HDR anymore... My "final" game mode settings (firmware 2000x) / SDR brightness ~15 contrast 40 (important in SDR to get grey steps without a tint and more natural faces) color 25 (faces are also natural enough) sharpness 0 tint 0 local dimming high contrast enhancer off color tone warm 2, +10 red gain bt1886 -3 (more depth) shadow detail +1 color gamut auto / HDR brightness 50 contrast 50 color 27 sharpness 0 tint 0 local dimming high contrast enhancer off color tone warm 2, +15 red gain st2084 -3 Shadow Detail+1 color gamut auto (dci p3 greyed out) On external device settings under game mode turn ON Game HDR ("HGIG) / [[[ And if the discoloration processing bothers too much in a game and u need a clean stable picture, but reduced contrast! : you set local dimming to Low in SDR Game and set bt1886 to 0, shadow details +1, Color 25 and Contrast 20, brightness 26 On HDR you set ST2084 to +2 , shadow detail +1 while you set it on LD Low. Again only for games Otherwise i would use upper settings. Leave Dynamic Black Equalizer on 0 And on peak brightness settings on consoles i focus 1500 nits ads, 1300 va, also ingame peak. Black is 0, full black. and paper white 200 ingame. Gamma and digital brightness default. And remember that turning on Game Motion Pluss (0,0 +) helps a bit with the slower dimming. As minimum base 10 blur, 0 judder gives stable 60 fps games a 120fps camera look (work very good) and 0 Blur, 10 Judder for stable 30 fps games. 10 blur, 5 judder for stable 30fps games with too much ghosting Of coruse OFF for the lowest input lag and competitive.
I have the same set and use almost the same settings except the st 2084. I find that too dim. Don't you think it will crush black details which already qn90a does due to aggressive local dimming.
@@aayushmeena3516 no, because the low grayscale in game mode is much brighter. That means u will never lose dark details even with -3. From my measurements -3 with HGIG aka Game HDR on, the curve is closer to the standard. A very bit brighter. You will increase the dynamic range with lowering st2084. While 0 brightens the mid tones and lowers the contrast. U have to set the HDR brightness to around 1700 in games and in consoles. Hdr means not brighter all the time. It is more realistic and the difference between dark and bright is very big. But do what u want or like it is your tv
@@aayushmeena3516 highering the red gain to around 10 and -2 blue should bring u closer to d65 in warm2 on the qn90a. For whatever reason samsung uses around 10% less red gain on the qn90a out of the box. But it washes out the colors and on hdr u need on top around +5 red gain and again -2 up to -5 blue on top. But this vary between units. But i would say overall+10 red gain is a safe way for all warm 2 tones to improve it without colorimeter
One thing about Samsung TV's. Turning auto-update off does not prevent you from getting your TV updated. As long as it is connected to the internet updates will still be forced by Samsung. The only way to prevent it is not to connect to the internet. Learned this the hard way on QN90A.
If you name the HDMI input PC which enable PC Mode, the correct/neutral sharpness is 10 on the Samsung QN95B, but if you don't enable PC Mode on any other HDMI input, 0 is the correct/neutral sharpness setting. My recomendation is to enable PC Mode on all HDMI inputs for the best picture quality and response times.
The issue with sharpness setting on Samsung is even at 0 there is undefeatable processing. Both sharpening and smoothing filters. No way to get a native neutral detail.
If I would leave sharpness at 0 with my PC connected I would end up with a total un-sharp picture. I tested so many test pictures and clearly 10 is the best setting for MY PC. If I use the same test pictures on the consoles 10 is way to sharp and it will add artifacts . Not sure what I am doing wrong or what is wrong here
@@GamingTech-UA-cam yes on PC game mode there are 2 ways technically to get PC game mode on the TV. One of them 10 is similar to 0 on every other mode. Do you have any non 4k demo discs like Digital Video Essentials or Disney Wow? Those are good for upscale testing.
@@Diegoacosta4250 ahí depende un poco de tu gusto, ya que muchas películas o series tienen un efecto de ruido, lo que si te recomiendo es que para nada uses el digital clean view o reducción de ruido ya que pierde detalle. Para imagen nítida lo dejaría en 5 o incluso hasta 6 si quieres que se vea un poco más marcado todo
In regard to local dimming set to high or standard. Have you noticed game HUD elements discoloration issue? On QN90A for example in Cyberpunk 2077 if the screen has a lot of dark elements, or dark elements directly behind the HUD the TV dimming algorithm will wash out the whole HUD making it dim and faded. The only mode to prevent it is on the LOW setting. I can even see the algorithm dimming TV's menu elements when you switch options in your video. It's when you have a small menu and are switching between standard and high local dimming options.
Hi there,please try for game mode hdr Brightness 45 Contrast 40 Sharpness 6-8 no more Color 25 Local D high Contrast enhancer off or low Color tone warm 2 ST.2084 on 0 Shadow det 0
I wish samsung would fix the HGIG on their tvs.. the tv still does some dynamic tone mapping even with HGIG enabled so you're getting a double tone mapped imagine for gaming.
Hey, love this video. Quick question, did you ever figure out the sharpness setting for game mode on console? It defaults to 10 (like you suggested is correct for pc gaming) but just wondering if you landed somewhere different?
I have a Qn95A. These settings I also myself found to be good on QN95A, but right now I'm not so sure. Game HDR, it does some good, but also bad in my view. I'm still not sure about this one. Also lowering gamma -2, or -3 affects colors, I'm still not sure. It's more accurate but it's an S shape gamma. And sharpness finally I turned it off, for 1440p+ games. It adds noise and doesn't look that good. So I just lower the TV contrast and maybe play with in game brightness/gamma. SDR game mode is worse, overbrightened, not accurate. Mornings look like it's 13:00 o'clock. Samsung should do more for game mode.
Thanks for the settings, i used my CX for 2 years gaming bo issues just HGIG is so dim, now im gaming my ps5 on qn90a HGIG is much better brightness details, now i only used my CX for movie watching.
6:25 Sharpness at 0 is the best when playing on a console. They are designed to have everything at 4k resolution so adding sharpness will make it look worse. You need sharpness at 10 on PC like you said because most things are 1080p.
@William LeGod Just the way it is. On PC the apps you use, browser and websites you visit arent 4k. Just 1080p. On PC if I dont have the sharpness at 10 everything is blurry and hard to read. That's why its perfect it to use it on PC but not on PS5 and Xbox.
I'm all for you upgrading your tv set, but please don't forget about your subscribers who own the LG CX. I feel like that is a large part or your subscription base and while I can't speak for them it was a huge reason why I subscribed to your channel.......and I don't intend to upgrade anytime soon.
Excellent video and thank you for the information! I have only one question: when you watch hdr content at night and the room is dark, how can your eyes stand the brightness at 50?
Hello brother what do you recommend? S90C 55", QN95B 55", LG OLED C1 48" or C2 48" for PC gaming/occasional movie consumption? also if i buy either of the samsung TVs i will get a free benq portable projector with it as a bonus. i prefer glossy panels over matte coating.
Great Video :) I have copied your settings and will try it now. Do you also have a video for TV settings ? I am still struggling with some micro lags with SAT TV in case of non HD content.
Really a video about game motion plus, what the Best settings for 30 and 60 fps games would be amazing, add little lag and aparently can make 30 fps games look almost like 60, please make that video
Brother please tell about samsung qn90c game mode setting i m not getting the picture output i want please help sometimes its too bright some times its too dark please help. My tv is 55 inch🙏
Gamma at -2 leaves the screen way too dim for me, and colors are oversaturated. I have it set to 2 and sometimes to 3. Some youtubers are saying 3 and some say to decrease it to -2. I am very confused. Overall I am not happy with this TV when it comes to gaming. The screen is way too bright in the evening when playing games. And colors are oversaturated. I wish I bought an OLED. LG C1 or something. I just feel the colors are not the way the game developers intended, when I compare to screenshots online.
What is the difference between Plus and Pro Gaming Motion Settings? The QN95B should have Pro and not Plus - wondering about the menu name in your video. I can't find any details about the difference. Anyone knows? Is it required / better (because I'm thinking about to buy the QN800B with only Plus but my boys play on this TV with PS4 Pro)? Thanks
Hello, I’m using my PS5 on my 65 inch QN90B which I have just purchased last week do you recommend these settings for me to use and also how many clicks for the hdr adjustment for the ps5 ? and I know for the last one is the darkest
@@loki76 90b is the same brightness as the 95. I thought you have to do it until you can’t see the sun which comes up around 28 clicks when it just clips the sun. I’ll try 19 thank you
Can someone please help me. Just bought the AU8000 today and I have my Xbox series x to go with it. I'm using the hdmi fast speed cables provided with the xbox and have it plugged into hdmi 1 slot. I enabled the input signal for hdmi 1 also on my TV for my xbox and have game mode set to auto. But when I click on the game hrd to enable it says "this function isn't available". I also enabled all upgraded view modes in the general section of my xbox. What am I missing please and thank you? Simply want to enable game mode hrd but can't.
Hi really impressive detailed tutorial. But i have a problem: i have the samsung QN92B witch is Basically the same as th QN90B and im using an xbox one X, but in the tv HDR Tone mapping i cannot turn game hdr on maybe someone could help me thanks alot
hello with this settings the colors and light are good in game mode ? because the tests of this TV indicates that it s impossible in game mode to have a correct accuracy And can we apply another mode of image with the ps5 like cinema mode to have more accuracy ? Thanks :)
Wita. Czy to prawda że model qn95b ma dużo wiekszy blooming niŻ rok temu qn95a.Czy naprawdę w porównaniu do Lg c2 evo bede mega zły.75cali samsung qn95b 8000złoty bs 77cali lg c2 11000złoty.
@@GamingTech-UA-cam hi guys and thank you for reply,i had this issue only once when i was watching Irishman on netflix,Loki QN95A its not cheaper tv,its the best tv from 2021 and its amazing for ps5,i am so happy i can control motion for games up to 60hz
Hello Which TV do you recommend for desktop PC and console gaming? S95B OLED 55 inch S90C OLED 55 inch C2 OLED 48 inch QN95B mini-led 55 inch Sony A80K OLED 65" All of them cost approximately between $800 to $950. Thank you.
@@GamingTech-UA-cam Yes my brother, I will only do gaming on it. You like the C2 panel better than S90C because of it's glossiness? Is it true that the glossiness of LG OLED TVs give them inkier blacks and better clarity than Samsungs QD-OLED TV's?
@@Greystonee I like my S95C much better than my LG G2 . But the pixel structure can make small text on the S95C look blurry compared top the G2. If I would need to decide I would go for my S95C again
@GamingTech-UA-cam is there any difference between S90C and S95B? Isnt the latter supposed to be better than S90C? have you ever used any 55 inch television with a computer? Isn't 55 inch too big for desktop gaming? Although I have a big desk space I can easily place a 55 inch TV on it but I fear it might give me eye strain which I never experience not even in VR but some people on the internet say 55 inch television will give you eye strain not sure how true that is. I really like bigger TV's because they are more immersive there is not doubt about that, but I'm afraid 55 will be too big for desktop PC usage, not sure if I should go with LGs 48 inch C2 because of higher PPI and more fitting size for desktop usage, but for $120 more I can get a brand new 55 inch S90C which is better in terms of color and brightness because of the quantum dot panel, don't know man there are so many options, pros and cons for both Samsung and LG OLEDs. I also saw your videos praising the mini-led QN95B, is it even comparable to QD-OLEDs? Appreciate you for responding brother, thank you for your help. And I'm sorry for asking so many questions.🙏
Settings are almost all same on all Samsung TVs. I use mostly same settings like you except Sharpness - 0 at everything, because its oversharpening image and of course Color Tone i personally love Standard. Samsung even have on official site - Standard - Adds no hue to colors. Warm 2 is not looking natural at all if you like yellow text or snow... Those are my personal settings on 65inch Q7F from 2017, enjoy your Samsung and i hope you like it.
I have qn90d 43, contarast enhacer off in crew motorfest, the picture is so dim that i cant play it, i get thays natural and so on, but I use low contrast enhancer which is MUCH better. Am I the only one?
Why would you compare it yo CX? It has washed colors being WOLED tv. Set color space to Native or, set color space to custom select bt2020 then again seitch yo normal, this improves tone mapping a lot. Just try to play a game and go to photo mode during and explosion or looking at the sky, switch color space to native and tone mapping will improve a lot, at expense of color accuracy. This kind of behaviour is happpening for years now
@@GamingTech-UA-cam Samsung just released Firmware 1302 the other day. It's not on their website, and some say they pulled it already....I got it pushed to my S95B already and have a video on the way showing the difference from 1211.2 as it only affected Movie Mode from my understanding.
Hi 👋 GamingTech Just one question. I recently bought the S95B and was wondering how dim the image can get. Honestly I’m really disappointed, cause one of the reasons why I decided to Switch my LG C9 was the max peak brightness of the s95 but it gets really dark after 6 min of playing. Does this also happens with you QN95? Any advices would be really welcome 🙏🏻 Planing to return it and go with the QN95 but I’m really unsure 🫤
@@GamingTech-UA-cam you’re the best . Was planing to return it but it fixed everything. Now the S95B looks really bright. As you mentioned my auto logo brightness was set to High. I also saw a video from HDTVs from yesterday where he’s talking about the Auto Dimming. Would be great if you can talk about this in your next stream .
Does anyone have any knowledge of this TV versus the qn90b. I've checked Rtings and on balance the qn90b is brighter and has a far better colour volume, I mean the colour volume for rec 2020 on the qn95b is really poor. Anyone have any experience of this?
I have a 65" QN90B. The only significant difference in hardware is the lack of the OneConnect box mounted at the lower-center of the TV's back panel. All the inputs are in the right side as usual with Samsung. I honestly think the 90B is the better bang for the buck before diminishing returns, esp if you can get it at Black Friday prices.
@@GamingTech-UA-cam LOL isn’t it a shame just as little as 10 years ago screens was completely free of that? But oh no we gotta get are panels from china now so it’s plugged with DSE and banding🤦🏼♂️
@@GamingTech-UA-cam plasma had grainy picture, I’ve had 2 plasmas and a $7000 Samsung curve tv since 2007, nether had ANY problems they do now, it’s just horrendous QC
Schärfe auf 0 mein Freund. Film modus zeigt ja auch 0 an. Im PC modus ist alles unter 10 nicht mehr neutral das stimmt war bei den älteren Samsung auch schon so. Wen du Schärfe auf 10 lässt während du alles andere als den pc modus an hast ist es falsch. Auch ist es so, das Oled‘s, wie dein LG, schärfer wirken im Vergleich, das liegt warscheins an der leucht Technik da jeder pixel selber leuchtet. Also nicht wundern das der Lg schärfer wirkt auf 0 im Vergleich zum Samsung. Spiele selbst auf einem Samsung uhd auf ps5, schärfe habe ich natürlich auf 0 und es ist korrekt 👍🏻
Please like , share and subscribe. Thank You!
🙂 nice Rest Weekend 🙃
You need to disable VRR / Game-Motion / 120hz modes
It needs to run at native 60hz with 16ms refresh, otherwise you will seriously gimp the local dimming, resulting in poor HDR.
Btw huge props to you my friend! Reducing contrast in HDR I thought was a cardinal sin, but it turns out as you point out, that reducing contrast with HGIG, gives the advantage of hard-clipping the peak brightness, and then matching your contrast to fit with it, so you don't clip any highlights (which you do at 50 contrast)
On my QN95A I need contrast reduced to around 39, to avoid any clipping of White, red, green, blue, cyan, magenta.
I specifically chose the 75" to get 1000 dimming zones, achieving much more localized control of contrast.
Whereas the QN90B 65" only have 720 dimming zones, worse PQ eotf tracking, lower contrast, lower peak brightness in real scenes etc etc. (Rtings)
I just got a 65 QN95A as a gaming TV as I got a massive discount on it. Looks amazing, much more pop than my Panasonic OLED TV. Some blooming, mainly on loading screens in games but this TV gets REALLY bright!
For QN90A - but applies to any QLED in broard terms.
This is Samsungs aporoach with their locally dimmed QLED's
- due to LCD lifted blacks the image will appear dull and washed out, which is then 'corrected' by overly clipping the colors with too high contrast - making the image pop regardless of poor contrast ratio, - but the image is also much much brighter than the PQ EOTF.
by reducing contrast below clip level, your image will look even duller and matte - that is until you start reducing shadow detail, obtaining real black - allowing you to actually reduce contrast below clip level without the image appearing washed out.
Then a new problem arises, the image is now much darker than PQ EOTF, which then has to be corrected by increasing ST.2086 until you gain the correct amount of brightness.
+1 ST.2086
-2 Shadow detail
39 contrast
No HGIG.
No 120hz mode
No Freesync
-As these will heavily impact local dimming negatively, because of how the image will refresh much faster, reducing the amount of time the local dimming processing can work with each frame.
Simply running
-2 ST. 2086
Will not get you true black, and will also overly darken the midtones. An image that in many instances will seem overly dark.
- and then comes the trap that many fall into, attempting to regain correct brightness by running highly clipped contrast at 45 - 50. This will give an overly dark and contrasty image, with overly bright blown out highlights and overly dark midtones.
In one scene your screen is way too bright, and in the next your screen is overly dark, a real paradox.
If you want your QLED to hit as close to an OLED as possible (though not entirely achieveable) use my approach, - use the PS5 UA-cam app, where you can get loads of test patterns to adjust game mode.
These settings will only work for QN90A game-mode.
+1 ST.2086
-2 Shadow detail
39 contrast
Thankyou for this finally found a very useful comment on UA-cam, you fixed my TV for ages trying different settings I couldnt find one that really worked.....yours is spot on...thanks again
thanks! I like these settings a lot on my qn90b. IDK if the picture is "correct" but I get that "wow this scene looks good" impression more often with these settings than stock game mode and I don´t feel like I´m missing out by not running in movie mode instead.
120hz movie is okay input lag wise but I think it´s still a bit laggier than game mode.
@@LP-mh6ri you can play around with contrast as you please.
You can also try
-2 shadow detail
+2 ST2086
With contrast being a slider you can play around with, 39 might be overly conservative for your taste.
Above 45 and it begins to look criminally clipped though.
@@Lasse3 thanks! will check which settings I like best. Either way it´s an improvement over stock or the settings I tried before.
Man you are a legend haha! I Play all these years with, always searching for the best calibration and never found one that satistifying me, and this one you made, its great! I have an Q80A but want to buy the QN90B or QN90C, and even in the Q80A works very well. I let the constrast in 43, i think works best for a less powerfull television! Thansk man! (Sorry for any mistakes in the english, I am braziliam haha)
I learned how to calibrate my TV watching some of your videos and you’ve always been great with your information. I have a QN90A and since it’s less bright than your TV I had to go to 44 for brightness. Otherwise your settings are very close to mine. I also agree with what you say about sharpness. On my TV I found 10 was a bit high but 8 seemed to give my picture good clarity
QN90A (maybe it also work for QN90B):
On my Game Modes i´m using - 2/-3 bt1886 Gamma and st2084 -2 /-3 (is more close to the curve) because it also help to eliminate some of the pulsaring backlight issues with loading icons and stuff like that. And beside of that, it looks more correct to the standard even with the sdr curve (not flat gamma with local dimming high) it looks natural on testpattern with faces compared to calibrated movie mode. SDR ives u a HDR Feeling and there is no need to force SDR to HDR anymore...
My "final" game mode settings (firmware 2000x)
/
SDR
brightness ~15
contrast 40 (important in SDR to get grey steps without a tint and more natural faces)
color 25 (faces are also natural enough)
sharpness 0
tint 0
local dimming high
contrast enhancer off
color tone warm 2, +10 red gain
bt1886 -3 (more depth)
shadow detail +1
color gamut auto
/
HDR
brightness 50
contrast 50
color 27
sharpness 0
tint 0
local dimming high
contrast enhancer off
color tone warm 2, +15 red gain
st2084 -3
Shadow Detail+1
color gamut auto (dci p3 greyed out)
On external device settings under game mode turn ON Game HDR ("HGIG)
/
[[[ And if the discoloration processing bothers too much in a game and u need a clean stable picture, but reduced contrast! :
you set local dimming to Low in SDR Game and set bt1886 to 0, shadow details +1, Color 25 and Contrast 20, brightness 26
On HDR you set ST2084 to +2 , shadow detail +1 while you set it on LD Low. Again only for games
Otherwise i would use upper settings. Leave Dynamic Black Equalizer on 0
And on peak brightness settings on consoles i focus 1500 nits ads, 1300 va, also ingame peak. Black is 0, full black. and paper white 200 ingame. Gamma and digital brightness default.
And remember that turning on Game Motion Pluss (0,0 +) helps a bit with the slower dimming. As minimum base
10 blur, 0 judder gives stable 60 fps games a 120fps camera look (work very good)
and
0 Blur, 10 Judder for stable 30 fps games.
10 blur, 5 judder for stable 30fps games with too much ghosting
Of coruse OFF for the lowest input lag and competitive.
I have the same set and use almost the same settings except the st 2084. I find that too dim. Don't you think it will crush black details which already qn90a does due to aggressive local dimming.
@@aayushmeena3516 no, because the low grayscale in game mode is much brighter. That means u will never lose dark details even with -3. From my measurements -3 with HGIG aka Game HDR on, the curve is closer to the standard. A very bit brighter. You will increase the dynamic range with lowering st2084. While 0 brightens the mid tones and lowers the contrast. U have to set the HDR brightness to around 1700 in games and in consoles. Hdr means not brighter all the time. It is more realistic and the difference between dark and bright is very big. But do what u want or like it is your tv
@@aayushmeena3516 highering the red gain to around 10 and -2 blue should bring u closer to d65 in warm2 on the qn90a. For whatever reason samsung uses around 10% less red gain on the qn90a out of the box. But it washes out the colors and on hdr u need on top around +5 red gain and again -2 up to -5 blue on top. But this vary between units. But i would say overall+10 red gain is a safe way for all warm 2 tones to improve it without colorimeter
@@Da-iken bro doing - 3 st 2084 made so much difference like wtf. This looks like oled level. Why 1700 nits?? I have around 18 click so 1500 nits.
@@Da-iken if possible can you also provide ur discord or reddit? I need some advice regarding the tv.
@GamingTech For Samsung TVs, neutral sharpness is 10 only in PC mode, otherwise the neutral value is 0.
One thing about Samsung TV's. Turning auto-update off does not prevent you from getting your TV updated. As long as it is connected to the internet updates will still be forced by Samsung. The only way to prevent it is not to connect to the internet. Learned this the hard way on QN90A.
I used most of your settings but I kept colour tone at standard as warm 2 was way too much.
Even Warm 1 was pushing it.
Thanks for the video 😊
If you name the HDMI input PC which enable PC Mode, the correct/neutral sharpness is 10 on the Samsung QN95B, but if you don't enable PC Mode on any other HDMI input, 0 is the correct/neutral sharpness setting. My recomendation is to enable PC Mode on all HDMI inputs for the best picture quality and response times.
The issue with sharpness setting on Samsung is even at 0 there is undefeatable processing. Both sharpening and smoothing filters. No way to get a native neutral detail.
If I would leave sharpness at 0 with my PC connected I would end up with a total un-sharp picture. I tested so many test pictures and clearly 10 is the best setting for MY PC. If I use the same test pictures on the consoles 10 is way to sharp and it will add artifacts . Not sure what I am doing wrong or what is wrong here
@@GamingTech-UA-cam yes on PC game mode there are 2 ways technically to get PC game mode on the TV. One of them 10 is similar to 0 on every other mode.
Do you have any non 4k demo discs like Digital Video Essentials or Disney Wow? Those are good for upscale testing.
@@ClassyTechCalibrations Thanks! I will do more testing with sharpness.
@@GamingTech-UA-cam it seems to me that sharpness 0 looks blurry - but increasing sharpness looks jagged 😅😅😅
On ps5
@@GamingTech-UA-camput sharpness on 5 brother
Sharpness at 4 is the best, no blur and no edges, they actually start at 5, you can put it on 5 for that sharp edges, but 4 is natural
PC or Consoles or both?
@@GamingTech-UA-cam both
@@charlymundo1439 y para películas hdr y ser?
@@Diegoacosta4250 ahí depende un poco de tu gusto, ya que muchas películas o series tienen un efecto de ruido, lo que si te recomiendo es que para nada uses el digital clean view o reducción de ruido ya que pierde detalle. Para imagen nítida lo dejaría en 5 o incluso hasta 6 si quieres que se vea un poco más marcado todo
0-20 on Samsung, so 4 is about 20%.
In regard to local dimming set to high or standard. Have you noticed game HUD elements discoloration issue? On QN90A for example in Cyberpunk 2077 if the screen has a lot of dark elements, or dark elements directly behind the HUD the TV dimming algorithm will wash out the whole HUD making it dim and faded. The only mode to prevent it is on the LOW setting. I can even see the algorithm dimming TV's menu elements when you switch options in your video. It's when you have a small menu and are switching between standard and high local dimming options.
Hi there,please try for game mode hdr
Brightness 45
Contrast 40
Sharpness 6-8 no more
Color 25
Local D high
Contrast enhancer off or low
Color tone warm 2
ST.2084 on 0
Shadow det 0
Sharpness is best at 5
For the consoles try sharpness at 4. That’s what I use and find it perfect
Will test it!
y para películas hdr? yo lo tengo en 10 o es mejor bajarlo
@@GamingTech-UA-camyes sharpness at 5 is the best on consoles
Thanks for sharing the settings I will try them
Still the Best qn95b Game settings on fw 1430 after trying 100 another settings🙄😅 But sharpness on 4 and Game hdr Off(No function, very DIMM). Thx🙂
I wish samsung would fix the HGIG on their tvs.. the tv still does some dynamic tone mapping even with HGIG enabled so you're getting a double tone mapped imagine for gaming.
Yes unfortunately this is happening
Hey, love this video. Quick question, did you ever figure out the sharpness setting for game mode on console? It defaults to 10 (like you suggested is correct for pc gaming) but just wondering if you landed somewhere different?
I recently bought this TV to connect to my computer and I can not get HDR mode enabled in game mode unfortunately. :(
Great video. I would like to see more calibration related videos. Example, how can the average tv user test and adjust gamma etc?
I have a Qn95A. These settings I also myself found to be good on QN95A, but right now I'm not so sure.
Game HDR, it does some good, but also bad in my view. I'm still not sure about this one.
Also lowering gamma -2, or -3 affects colors, I'm still not sure. It's more accurate but it's an S shape gamma. And sharpness finally I turned it off, for 1440p+ games. It adds noise and doesn't look that good.
So I just lower the TV contrast and maybe play with in game brightness/gamma.
SDR game mode is worse, overbrightened, not accurate. Mornings look like it's 13:00 o'clock. Samsung should do more for game mode.
Game HDR makes my games darker
The average brightness certainly goes down.
Did you calibrate your tv well?
Thanks for the settings, i used my CX for 2 years gaming bo issues just HGIG is so dim, now im gaming my ps5 on qn90a HGIG is much better brightness details, now i only used my CX for movie watching.
Great content as always. Hey mate also wondering are you from South Australia?
Yes I am! :-)
Same here :) I live in Nuriootpa
@@taithaldane8777 Cool! >Did you miss my live stream?
@@GamingTech-UA-cam I did actually but I will definitely watch it some time after work tonight.
I have the s95b now as you know. Would love to know picture settings for it for hdr gaming and also how many clicks on hdr ps5 and series x sliders.
6:25 Sharpness at 0 is the best when playing on a console. They are designed to have everything at 4k resolution so adding sharpness will make it look worse. You need sharpness at 10 on PC like you said because most things are 1080p.
Most games on consoles are not native 4k though
@@DukeOfSera The PS5 UI and games have 4k in mind. Tho most games arent native 4k but they use checkerboarding to reach 4k.
@William LeGod Just the way it is. On PC the apps you use, browser and websites you visit arent 4k. Just 1080p. On PC if I dont have the sharpness at 10 everything is blurry and hard to read. That's why its perfect it to use it on PC but not on PS5 and Xbox.
@@doctorsilva1345 checkerboard sucks and on pc u can see 1440p resolutions too. Most high end pcs are on 1440p.
Sharpness on 5 is the best in everything
Ich kann bei Schärfe 0- 5 empfehlen! Im Spielemodus bei Samsung, greift die Schärfe, stärker !
y en películas hdr y sdr cuanta nitidez recomiendas?
@@Diegoacosta4250sharpness at 5 is the best for everything
Maybe you could show us.the same settings for lg cx.
I'm all for you upgrading your tv set, but please don't forget about your subscribers who own the LG CX. I feel like that is a large part or your subscription base and while I can't speak for them it was a huge reason why I subscribed to your channel.......and I don't intend to upgrade anytime soon.
No worries. My CX stays with me and I will provide settings for it as well
Excellent video and thank you for the information! I have only one question: when you watch hdr content at night and the room is dark, how can your eyes stand the brightness at 50?
Hi GamingTech,
would u still use HDR10+ GAMING and Game HDR in 1430 version?
How do you change the picture settings when the tv is in game mode?
Have you tried the Smart Calibration feature yet? It would be neat to see how those calibration settings match your own.
Will test
please ps5 and xbox Game Mode Picture Settings
Those are my PS5 and Xbox settings
I just subscribed. Thank you so much.
i love the your videos man keep it coming! i recently bouth the QN95A and just wondering if these calibration settings will wor on the QN95A as well?
Thanks. I doubt it but give it a try
Hi, The First Descendant on PC supports HDR10+. The TV goes flickering like crazy and looks like it wants to explode.
Hello brother what do you recommend? S90C 55", QN95B 55", LG OLED C1 48" or C2 48" for PC gaming/occasional movie consumption?
also if i buy either of the samsung TVs i will get a free benq portable projector with it as a bonus.
i prefer glossy panels over matte coating.
Hi, where can I find the photo of the contrast test? Thanks, interesting video! 👍
Do you have a video when playing HDR games with this settings on xbox serie x ?
Also what version of firmware you have ?
Great Video :) I have copied your settings and will try it now. Do you also have a video for TV settings ? I am still struggling with some micro lags with SAT TV in case of non HD content.
Really a video about game motion plus, what the Best settings for 30 and 60 fps games would be amazing, add little lag and aparently can make 30 fps games look almost like 60, please make that video
Brother please tell about samsung qn90c game mode setting i m not getting the picture output i want please help sometimes its too bright some times its too dark please help. My tv is 55 inch🙏
Gamma at -2 leaves the screen way too dim for me, and colors are oversaturated. I have it set to 2 and sometimes to 3.
Some youtubers are saying 3 and some say to decrease it to -2. I am very confused.
Overall I am not happy with this TV when it comes to gaming. The screen is way too bright in the evening when playing games. And colors are oversaturated.
I wish I bought an OLED. LG C1 or something. I just feel the colors are not the way the game developers intended, when I compare to screenshots online.
What is the difference between Plus and Pro Gaming Motion Settings? The QN95B should have Pro and not Plus - wondering about the menu name in your video. I can't find any details about the difference. Anyone knows? Is it required / better (because I'm thinking about to buy the QN800B with only Plus but my boys play on this TV with PS4 Pro)? Thanks
ok I did your seetings for my xbox series x and playing Resident evil 4 remake. But now with your settings its really dark 😞
It is super dim with game hdr and No contrast enhancement, how can I help it?
Hello, I’m using my PS5 on my 65 inch QN90B which I have just purchased last week do you recommend these settings for me to use and also how many clicks for the hdr adjustment for the ps5 ? and I know for the last one is the darkest
Not sure if they fit also the QN90B. I think it was 19 clicks for the PS5 calibration
@@GamingTech-UA-cam thank you just making sure because the sun just disappears after 28 clicks from darkest to lightest
@@loki76 90b is the same brightness as the 95. I thought you have to do it until you can’t see the sun which comes up around 28 clicks when it just clips the sun.
I’ll try 19 thank you
@@loki76 sounds about right thank you! I did the 19 clicks 👌🏽
Can someone please help me. Just bought the AU8000 today and I have my Xbox series x to go with it. I'm using the hdmi fast speed cables provided with the xbox and have it plugged into hdmi 1 slot. I enabled the input signal for hdmi 1 also on my TV for my xbox and have game mode set to auto. But when I click on the game hrd to enable it says "this function isn't available". I also enabled all upgraded view modes in the general section of my xbox. What am I missing please and thank you? Simply want to enable game mode hrd but can't.
Samsung by default in game mode has colour space set to native should it be set to auto when playing an HDR game?
Gutes Video, könntest Du vielleicht nochmal ein Setting Video machen mit der neuesten FW?
leider nicht. I ch hab den TV nicht mehr ;-)
Hi really impressive detailed tutorial. But i have a problem: i have the samsung QN92B witch is Basically the same as th QN90B and im using an xbox one X, but in the tv HDR Tone mapping i cannot turn game hdr on maybe someone could help me thanks alot
Never heard of a QN92B. Is your Xbox in HDR content with game mode turned on?
@@OMGtheykilledKenny42 it was just a setting issue i resolved it
hello with this settings the colors and light are good in game mode ? because the tests of this TV indicates that it s impossible in game mode to have a correct accuracy
And can we apply another mode of image with the ps5 like cinema mode to have more accuracy ? Thanks :)
My QN90B is coming tomorrow should I not do any updates at all when setting it up? Heard there was a few issues with updates
I can use this settings for Q60A 2021 ?
Can you repeat this video with the latest firmware update please
Wita. Czy to prawda że model qn95b ma dużo wiekszy blooming niŻ rok temu qn95a.Czy naprawdę w porównaniu do Lg c2 evo bede mega zły.75cali samsung qn95b 8000złoty bs 77cali lg c2 11000złoty.
Danke!
Thank You so much!!!
Great video,do you know how switch off ABL in service menu? I see alot of ABL on my QN95A when i watch 4k hdr movies,greetings from Scotland✌️
I haven't checked this out. So far ABL was not very obvious .
@@GamingTech-UA-cam hi guys and thank you for reply,i had this issue only once when i was watching Irishman on netflix,Loki QN95A its not cheaper tv,its the best tv from 2021 and its amazing for ps5,i am so happy i can control motion for games up to 60hz
Great review! How is game motion plus with this TV? Does it make 30 fps games look like 60 fps??? How is input lag delay in that case?
Most of the others use ST.2084 as +3 but u do -2. My TV is samsung q7. Could you help me pls?
If i turn hdr 10 plus off, i can't enable hdr gaming? 😮
Hello
Which TV do you recommend for desktop PC and console gaming?
S95B OLED 55 inch
S90C OLED 55 inch
C2 OLED 48 inch
QN95B mini-led 55 inch
Sony A80K OLED 65"
All of them cost approximately between $800 to $950.
Thank you.
@@Greystonee are you just playing? Then check the S90C and see if you like the panel coating. If not, the LG C2 is a fantastic TV
@@GamingTech-UA-cam Yes my brother, I will only do gaming on it.
You like the C2 panel better than S90C because of it's glossiness?
Is it true that the glossiness of LG OLED TVs give them inkier blacks and better clarity than Samsungs QD-OLED TV's?
@@Greystonee I like my S95C much better than my LG G2 . But the pixel structure can make small text on the S95C look blurry compared top the G2. If I would need to decide I would go for my
S95C again
@GamingTech-UA-cam is there any difference between S90C and S95B? Isnt the latter supposed to be better than S90C? have you ever used any 55 inch television with a computer?
Isn't 55 inch too big for desktop gaming? Although I have a big desk space I can easily place a 55 inch TV on it but I fear it might give me eye strain which I never experience not even in VR but some people on the internet say 55 inch television will give you eye strain not sure how true that is.
I really like bigger TV's because they are more immersive there is not doubt about that, but I'm afraid 55 will be too big for desktop PC usage, not sure if I should go with LGs 48 inch C2 because of higher PPI and more fitting size for desktop usage, but for $120 more I can get a brand new 55 inch S90C which is better in terms of color and brightness because of the quantum dot panel, don't know man there are so many options, pros and cons for both Samsung and LG OLEDs.
I also saw your videos praising the mini-led QN95B, is it even comparable to QD-OLEDs?
Appreciate you for responding brother, thank you for your help.
And I'm sorry for asking so many questions.🙏
Settings are almost all same on all Samsung TVs. I use mostly same settings like you except Sharpness - 0 at everything, because its oversharpening image and of course Color Tone i personally love Standard. Samsung even have on official site - Standard - Adds no hue to colors. Warm 2 is not looking natural at all if you like yellow text or snow... Those are my personal settings on 65inch Q7F from 2017, enjoy your Samsung and i hope you like it.
This is true....but warm 2 pops more....but also makes a clear sky tinted
I have qn90d 43, contarast enhacer off in crew motorfest, the picture is so dim that i cant play it, i get thays natural and so on, but I use low contrast enhancer which is MUCH better. Am I the only one?
Should I use these same settings on my s95b
Why would you compare it yo CX? It has washed colors being WOLED tv.
Set color space to Native or, set color space to custom select bt2020 then again seitch yo normal, this improves tone mapping a lot. Just try to play a game and go to photo mode during and explosion or looking at the sky, switch color space to native and tone mapping will improve a lot, at expense of color accuracy.
This kind of behaviour is happpening for years now
Why do you want everything to look red and blow up all your highlights and kill the contrast 😂😂😂 I feel bad for your brain
@@o_KingOfKings_o in Normal is that bad, a bit oversaturared, but not only red, so you lower overall color...
New firmware fix the local dimming bug?
I haven't had any local dimming bug so far. Not sure if there is a new FW for the QN90B
@@GamingTech-UA-cam Samsung just released Firmware 1302 the other day. It's not on their website, and some say they pulled it already....I got it pushed to my S95B already and have a video on the way showing the difference from 1211.2 as it only affected Movie Mode from my understanding.
Hi 👋 GamingTech
Just one question.
I recently bought the S95B and was wondering how dim the image can get. Honestly I’m really disappointed, cause one of the reasons why I decided to Switch my LG C9 was the max peak brightness of the s95 but it gets really dark after 6 min of playing.
Does this also happens with you QN95?
Any advices would be really welcome 🙏🏻
Planing to return it and go with the QN95 but I’m really unsure 🫤
No no issue here with my QN95B. This sounds like you play games with a lot of static symbols. can you turn off logo diming?
@@GamingTech-UA-cam you’re the best . Was planing to return it but it fixed everything. Now the S95B looks really bright. As you mentioned my auto logo brightness was set to High. I also saw a video from HDTVs from yesterday where he’s talking about the Auto Dimming. Would be great if you can talk about this in your next stream .
@@vparziale Just join my next stream on Sunday and remember me ;-) And please like and share my content. Thank You!!!!
Does anyone have any knowledge of this TV versus the qn90b. I've checked Rtings and on balance the qn90b is brighter and has a far better colour volume, I mean the colour volume for rec 2020 on the qn95b is really poor. Anyone have any experience of this?
I have a 65" QN90B. The only significant difference in hardware is the lack of the OneConnect box mounted at the lower-center of the TV's back panel. All the inputs are in the right side as usual with Samsung. I honestly think the 90B is the better bang for the buck before diminishing returns, esp if you can get it at Black Friday prices.
Why hdr looks so dark after activate it
Any DSE or banding? QN90B was just horrendous
Yes there us some DSE and banding
@@GamingTech-UA-cam LOL isn’t it a shame just as little as 10 years ago screens was completely free of that? But oh no we gotta get are panels from china now so it’s plugged with DSE and banding🤦🏼♂️
@@TechCody113 LCD was always worse and Plasma had DSE as well. Now with Oled we have almost a perfect display
@@GamingTech-UA-cam plasma had grainy picture, I’ve had 2 plasmas and a $7000 Samsung curve tv since 2007, nether had ANY problems they do now, it’s just horrendous QC
HDR10 Gaming why didn't you turn it on?
Makes the picture worse
What new in 1252 fw?
Brightness 50 is too bright for me
Schärfe auf 0 mein Freund. Film modus zeigt ja auch 0 an. Im PC modus ist alles unter 10 nicht mehr neutral das stimmt war bei den älteren Samsung auch schon so. Wen du Schärfe auf 10 lässt während du alles andere als den pc modus an hast ist es falsch. Auch ist es so, das Oled‘s, wie dein LG, schärfer wirken im Vergleich, das liegt warscheins an der leucht Technik da jeder pixel selber leuchtet. Also nicht wundern das der Lg schärfer wirkt auf 0 im Vergleich zum Samsung. Spiele selbst auf einem Samsung uhd auf ps5, schärfe habe ich natürlich auf 0 und es ist korrekt 👍🏻
Will this work with the QN90B
It should
Is the QN95B 100hz refresh rate?
up to 144hz with a PC
Kannst du das Video auch auf deutsch machen