2020 ford f150 3'5 ready lift kit installation
Вставка
- Опубліковано 10 жов 2024
- This episode we will show you how to install 3.5’ ready lift kit on this beautiful Ford F-150 , its a fun project , with this kit the costumer wanted 35” tall tires on 22x10 -25mm hostile wheels , the 3.5’’ lift kit takes about 4hours to complete .
If you have any question about installation just send us a question .
www.firstchoic...
/ firstchoicetiresnashua
/ firstchoicetires
www.google.com...
I had this lift kit on my 2010 F150 and now I have it on my 2018 F150 for 3 years now. It is a great kit! No issues with ball joints. Just keep them greased. I'm running 20x10 -24 offsets with 33x12.50 tires. I did remove the front crash bars and there is no rubbing at all.
What is this kit called and where can I find it?
Its a READYLift SST 3.5. You can buy it at Custom Offsets.
Definitely getting this setup for mine for sure !! Super slick 👍🏼
the leaf spring center pins hold the leaf pack from coming apart using the c-clamps was pointless
Let’s see some pictures of the cv joints!
sorry don't habve it that
You think I can use my bilstein 5100 with those spacers on the strut assembly..
Nice looking truck perfect stance..
Ready lifts site says that kit is not suppose to be used with off road package. That truck has the off road FX4 package is there anything you had to do ? were the CV angles okay ? I want to put this kit in but my f150 but it has the FX4 package my local shop says it won't work but with no reason why other than because ready lifts site says so .
Same process on the 2021? Can’t find an install video for my 2021 4x4
Hi there! I was wondering how much you had to cut off the crash bars? Did you have to cut crash bars and plastic trimming?
I just put a 3.5” rough country lifted kit and now planning to put the rims 35x12.5 22 what kind of cut I need to do?
Did you do the lift? If so do the wheels rub?
Zero offset will require trimming. Instructions say zero offset to +18 is good with 35x12.5. I'll be installing +16 offset and we'll see how it goes
I noticed the license plate on that truck is Massachusetts,, are you located in Massachusetts?? I have the same truck. I would like to do the same thing to my truck
Did you just trim the front plastic? No trim to crash bars?
some plastic and cross bars because the customer wanted 22x20 negative off set
Truck rides like a dump truck with mine on. Also has 18 35 x12.5 wheel tire.. I feel either stick with a level kit or do the full diff drop 4 or six inch lift.. I’ve had two shops do this first one screwed up second one didnt do much better I wasted 1000 on second shop trying to fix should have went 4 inch
I believe this new truck has been destroyed IWE??? Are you torquing anything ??
My friend everything is torqued , it’s a quick video.
Hi my mech didn’t put the 1” drop shaft thing I never 4x4 u think it’s will b issue?
It should, just in case, why he didn’t installed it?
That is only used with a two peice drive shaft.
Iam try to fit my 37 inch tires on a 3inch lift I can't afford that 6inch lift for my 2016 f150
37” way to big , you will need 7” inch lift kit to make work
@@firstchoicetires6017 got damn. I just bought 3.5 lift kit Iam do some cutting Iam try to make it work
did you guys added grease to the upper control arm ball joint?
It’s pre-greased
You guys need some help. Chrome sockets instead of impact sockets, no reference to torque, Jack used as Jack stands, so manysafety concerns. It appears you don't know about the IWE actuator. You probably damaged a brand new truck.
Did you trim the bumper crash bar.
yes because customer wanted have 22x10 negative off set on 35"
Is it possible to leave the factory small block that you took off on the rear leaf springs and add the new 3in. Lift block with the factory to get another inch or 2 lift ?
Yes you can but then your truck will be way off level , the rear of the truck will set higher , I personally don’t like .
@@firstchoicetires6017 thanx for the info
First Choice Tires I have done some research on this, and I have heard that the spacer is not to be used on the FX4 trim, but it looks like it worked fine for you. How are the cv angles on that now?
Zac so ford is wird , on this truck I used the full kit , but this truck did not came with off road packages, this is platinum edition with fx4 decal , I don’t know why the put fx4 on it , but cvaxel is right every thing works well, Ford has so many trim .
@@firstchoicetires6017 Excellent. Have you tried to drive it in 4 wheel drive? Heard there can be issues with the CV angles at the angles they achieve. Let me know.