Ford F150 Rough Country 3” Lift Kit Install | 21-24
Вставка
- Опубліковано 28 лип 2024
- "Upgrade your 2023 Ford F150 with this detailed DIY guide on installing a 3-inch lift kit! 🛠️ Follow along as we walk you through each step, providing expert tips and tricks for a smooth lift kit installation. Boost your truck's performance and aesthetics as we elevate it to new heights!"🚗✨
👉 Timestamps:
0:00 - Introduction
1:21 - Parts
2:37 - Rear Suspension Lift
4:36 - Front Suspension Lift
8:34 - Final Look
🚀 Don't forget to like, share, and subscribe for more exciting truck mods and DIY tutorials! Have questions or suggestions? Drop them in the comments below. Happy lifting! 🤘
www.shopfive7.com - Навчання та стиль
Nice truck clean work man
Looks like you took your time and did a professional install. Can I hire you to install mine?
Did you use a vacuum pump on the cv axle “actuator” thing that instructions mention or no?
Will it work on a 2wd?
What happened to the bimmer?
Cadê os videos da BMW???? Kkkkk
How thick would you say those preload spacers are?
I don’t have an exact measurement but I would guess they were about 3/8 of an inch a piece totaling about 3/4 stacked give or take. Hope that helps.
Any problems with putting the shocks on upside down? I just did this install and Rough Country specifically says to put the piston rod up. I’ve heard other installers say they had issues and had to flip them over.
What size tires do you have on?
Does the tire rub with the control arm? I installed some but my tire rubs on it and don’t know why? Any thoughts
I'm having the same issue, did you ever get an answer
I apologize I didn’t see the other person‘s message but when the installation was done, I did not notice the tire rubbing with the control arm. I don’t see why it would but I will say that the owner did want an aggressive stance so we installed 1 inch spacer/adapter couple days later. That might’ve fixed the problem but initially I did not notice the tire rubbing.
How are the CV angles?
Watched the video for the same reason I’m thinking of doing the 3 inch RC vertex lift, how are those CV angles?
just did 3” rc struts with upper arms and the axles are almost binding. trying to find a diff drop kit
@@huntervaden9228 got a video or picture of it?
Hello, Are you interested in testing our products? We would like to invite you to test the Scratch-Resistant Windshield for your 2017 RZR 1000