Chris, you didn't give any commentary at the end comparing the power tool v hand tool approach. What's up with that? How long did each method take, which did you prefer, challenges of each, and so on. Great video nonetheless.
Good point thats a missed opportunity for sure. I guess I got lazy there at the end after hours upon hours of editing and narration haha. This has taken me days on and off. I can tell you in a nut shell that I much more preferred the hand tool side. I honestly dont think it took me a significant amount of time longer. cutting the tenons and tongue on the table top was a breeze and very enjoyable, but plow the groove and boring out the tenons was definitely hard work. For me it is always more rewarding and enjoyable when I complete a task with hand tools, but there are certain things that powertools are worth using. For instance router out the groove was substaintially easier than plowing it with the plow plane haha. Ill try to remember to do that commentary next time! Thanks Hazem!
My impression, from watching the video, was that both finished products worked out well ... so which approach one prefers would really be determined by the tools, skills, and how you want to spend your time working
And the amount of dust you can cope with. Mine's an attic workshop so dust is a problem. Dust extraction would be expensive, difficult and take a lot of already limited space. So hand tools are the way I've gone.
Thanks for the comparison video. I prefer hand tools these days but always find men standing around with comments like, "don't you like electricity", or "you would be finished in 20 minutes with power tools". Gets old pretty fast, it's nice to see someone proficient in both and to be honest sometimes a blend of the two is the handiest.
I bought this for my friend for his birthday as we just moved into a new house and he finally has room for a workshop. The bench was very easy to set up ua-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh They center support is a little difficult to snap in and out of place at first but at least then we know the bench is secure. It was a pleasant surprise when we saw it came with clamps. I apparently missed that in the description. My friend loves the versatility of the bench. Great starter bench for his workshop and easily transportable all over our property. I wish the bench was a little taller but the other features of the bench more than make up for that.
I really enjoyed your narrated and step by step video. I get so tired of turning on a video and seeing it in high speed and no explanation of what and why they are doing something. Just a great video. Thanks so much. David
I absolutely LOVE the hand tool vs. power tool format!!! Please do more like this. Not only do you get to see how to do both, but you can mix/match techniques depending on what you have in your shop to work with. Love it!
Very well explained. Thank you. I am presently building a harvest table & will be doing breadboard ends. Recently bought 5 Douglas fir doors from the early 1900’s that could have possibly ended up in the dumpster and repurposing the lumber. Anyone who has worked with today’s lumber cannot appreciate the high value of old growth trees from 100 years ago. You are a young man & already possess the fine qualities of a good woodworker and can only hone your skills even further. Your common sense approach to the discipline of wood & tools is a great example to anyone watching this video that wants to get done The proper way. Victor from Canada. .......thanks for your time & consideration.
I hardly own any hand tools because of the skill and coordination required. I fully get the appreciation folks have for them and respect those who take the time. It's a lot quieter, which can make a big difference of you have children trying to sleep and stuff. Hats off to a super strong breadboard. Love the thought and engineering that went into it.
Hand tools are for the true craftsman, and not only requires good tooling, but lots of talent from years of experience. Power tools are for quicker build times, and the quality of the job is determined by the builders efforts and accuracy in setting up the machinery correctly. Once this is done, electricity takes over. (Thank you Benjamin Franklin.). Thanks for a good video.
I know the video is a little older but I felt that I should comment. I think what you have done here really shows that whatever tools you have your disposal and you can afford are the right tools. Certain tools, power or handtools, are better for certain jobs. It was nice to see that you don’t have to necessarily be committed to one or the other and you can appreciate working with both. Great video.
I have always been a power tool junkie, but the older I get the more I appreciate hand tools and the old ways of doing things, and you gave me the drive to learn the old ways even more. You are a fine craftsman and I really enjoy your channel!
Thanks so much Tony. It is definitely a super rewarding experience for me when using hand tools and my own practiced skills to build something. It feels great when I am done.
I'm a girl and a bit shy of power tools. But my past life in the Victorian times has led me to love furniture that was crafted this way, I like furniture that is sustainable and can be reused for centuries. Unlike the garbage today that gets thrown out in the trash. I searched this video because I found an antique draw leaf table missing its leaves, and it is built with breadboard ends. So.Now I am in search of some hand tools to try my hand at what you've done in this video, which is amazing and so much appreciated .
I watch this video about every three months. Based on my UA-cam search history it keeps popping up as a suggested video. A pure joy to watch. The hand tool side is my favorite and a big reason I’m converting over to using more hand tools in my shop over the power tools. Good call quitting your day job!! 👍🏻
Excited to see you using that little slick. I work at a small timber framing company, and we all carry 2” wide chisels and use them for anything we can. They can be monsters or persuasion tools
Chris, great video. This comment is late as the video was posted two years ago but to cut the mortises I use a forstner bit of the width I want and after the first plunge to depth, advance the board 1/8 in at a time the bit will cut just fine and when done the mortise only needs a chisel run over the surface in case of any stray fibers left. This worked fine for a 3/8 wide mortise. Needs to be done in a drill press set up with a 90 degree fence so the board is perpendicular to the wood and just needs to be moved along as needed. Also round over the ends of the tenon sides so I don't have to square the mortise ends. Thanx again
He said “regular, affordable, power tools”…. I agree with the power mortiser and am saving for one myself, but even a decent quality one isn’t really regular and affordable IMO. What may work for some guys in a short term is a power mortise attachment for their pillar drill ~$200 for decent one with bits; just keep in mind that this is more of a solution for floor standing drills since table top pillar drills don’t have enough throw in the quill to have an effective mortiser. The table top pillar drill really hits its max effectiveness with a mortiser attachment in the 1/4” mortise range like in rail/stile cabinet and small furniture. Just my 2¢
I am a new subscriber and wanted to say I enjoy watching, you showing both hand tools and power tools is vary helpful seeing how I am just starting to get involved with woodworking and don't have a lot of either just a littel of both.
haha. yea I sure do like that truck. Unfortunately its in the body shop right now because some druck driver smashed it while it was parked on the street
A few years ago, I fumbled my way through the power tools version of breadboard ends. After watching you do it, I’m glad to see I didn’t do it completely wrong. But, it would have been nice to have you there to point out how I could have done better! Amazing job!
Well done Chris. Those tenons look stout. Myself... I'm a hybrid woodworker and use both to get whatever task accomplished the fastest with the best results. I find that I use power tools during the day and then hand tools at night after I tire of the noise. That stated I get great pleasure from using scary sharp hand tools no matter what time of day. :)
I watch a lot of videos on line, yours by far are the most professional I have seen. Done very well on all aspects. Very talented wood working skills and a joy to learn from. I just found you this morning and you have a new fan. I install hardwood flooring and I am always looking for a way to grow my skill sets. One of the hardest things I deal with on a daily basis is not being given enough time to do my job the way I would like as far as quality is concerned. I consider myself a perfectionist, a gift sometimes and a curse too, but that is how God wired me I guess. Thanks for the work put into video form for all of us to learn from. Ed
Wow, thank you very much for the kind words. I really appreciate that I love that you get some enjoyement out of them. I am totally the same way as far as being a perfectionist, and that can hurt your profits for sure as time is money and the longer you spend on a job the less you make. But I cannot sell someone something unless Im truly happy with it. But keep being a perfectionist sir, it means we sleep better at night knowing we did a job well done :)
I think the finished product shows the craftsmanship involved regardless of what tools you use to accomplish it. I cringed when the router started plowing out the groove, the hand tools way was much quieter and seems like the way to go, but so so so much work. Pushing that plane sure makes your arms look good tho, maybe I need to do that more. I bought a camera to make videos a few years ago and still haven't figured out the process and I hear so many talk about the time it takes to edit etc. You've rapidly become my favorite woodworker. Great job as usual. Another fine video from my favorite woodworking team. Be sure to give Utz an attaboy from me.
Being an older, non trained, retired lineman who has patiently builds things, i loved how you built that one end with hand tools. i wish i could have had a dual trade because it would have been wood working. thanks
Hi Chris - Great video and fantastic workmanship. Its great to see someone using hand tools with such skill. I think you demonstrated that they are not really much slower than power tools but with so much more satisfaction. Love the draw bored dowels - I have just completed a new workbench with a laminated Bubinga top on a Mahogany base. I used draw bored oak dowels for the complete assembly and it is so solid. Keep up the great work - Dave
Greetings from Ireland. I'm a hobby woodworker and within the next few weeks, I'll be starting to make my first ever tabletop with breadboards. This video was just great and I picked up so many tips from it. I'm sure I'll be referring back to it often during my attempt. I'll be using Wych Elm which is very hard but beautiful. Many thanks.
Something about hand-tools make it look more relaxing to do. I have very few power tools, but collecting some hand tools to get into some woodworking. Just feels right to me. ;-) Really nice work.
Hey Chris, just revisiting this video on the breadboards and getting all the ideas in my head to do the same on a project in the near future. I will be taking the all hand tool approach myself as I have limited space in my rented one car garage. I want to thank you for all your videos and great content that you put out. As mentioned before, I am building many of my hand tools as well. I am looking into the bowl blank suggestion from before. As always awesome content.
Great vid, awesome build, entertaining to watch, and I really appreciated your ability to clearly explain WHY you did what you did while you were doing it... that is SUPER helpful to newbies.
Thank you so much for the thoughtful explanation of both. I was hesitant to try breadboard ends, but now feel confident I can do it. My table top is only 7/8" I think it should work with the proper calculations. Thanks again!
I just watched two of your videos and learned a tremendous amount on how these tables are made. Subscribed!!! An excellent table and fantastic video. I'm sure I'll be referencing your videos often as I plan on making a similar table from 100 year old tobacco barn timber.
Great instructional video for both techniques - clearly presented, with some good tips on how to proceed correctly. Thanks. Might try this in a future project!
Un-stinkin-believable! Your patience and skill with the handtools is remarkable! And the finished product looks incredible! I loved the little chamfer highlight you did to accentuate the breadboard ends. So what was the time difference between using both methods?? Did they really turn out as identical as they seemed in the video? Or were there some pros and cons of going with any particular method? Amazing job, Chris!
Whats up Drew! I appreciate the kind word friend! I am really liking that chamfer too. I was super worried Id ruin the entire top by doing that, but it turned out nice. cutting the tongue and tenons on the table top goes to the hand tools. It was probably the same amount of time or slightly longer, but it was WAY more enjoyable, and very accurate. The breadboard ends goes to the power tools. plowing the groove and boring those mortises by hand was a LOT of work haha. Both sides really did turn out great (thankfully as this is going to a client) There is not distinquishable differnce between them
That was a lot of fun. Thanks. I've been a furniture maker for 30 yrs and it's always fun to hang out with other woodworkers in there shops and see there tools and stuff. Good job!
Hi Chris Just found you and subscribe, here in England I do the very same work as you and I can't believe what a pleasure it is watching someone else doing it, this site is going to be my new past time keep up the great work mate and the laid back way you do it 🇺🇸🇬🇧
Nice work. I once fixed breadboard ends before I learned of the movement that happens. So far the project is still intact. I flooded it with mineral oil, it seems to have a more stable moisture content. It is an island top cutting board basically.
Great work! This has become one of my favorite channels over the past couple weeks. IMHO you sir are underexposed in the youtube woodworking world. I'll be sharing links in the future. Thanks you for your great work.
Wow Richard, thank you so much. That means a lot to me. I am glad you like the videos, and hopefully as time goes on and I put more stuff out there I will continue to grow. Comments like this really keeps me motivated so thank you!
You are skilled, my man. Great work. I personally prefer hand tools, maybe more time is needed, but I believe there is more control using good hand tools. Only problem is I don't have the skill that you possess, so I'll just watch in awe. Great video
Instead of using a chisel or spokeshave to whittle the ends of dowels, I keep a pencil sharpener in my tool box (for sharpening my pencils 🙂) and use it to trim the ends of the dowels. Works great!
Awesome. Working on a cutting board and my homemade tablesaw isn’t accurate enough for doing it so I was trying to figure a good way todo it with hand tools
In another life I worked for a high end furniture manufacturer. The place was 100 years old back then and I have never seen such a collection of craftsman in one place since. I was there for 3 years and got the wood working bug. The company went broke. Fast forward 40 years and three other careers, I'm semiretired and for the last 18 months I have been collecting tools and building a small work shop. I put the word out that I was taking orders and my daughter said she wants a large table for the 6 of them. My plan is to make a 1/2 scale table as practice first. I have your plans and I'll keep you posted.
Great video and I'm happy I found your channel. I liked that you approached the task with different tools, not so much for comparison, but rather for its educative merit. Great to see how you can acheive the goal through different means :)
Thanks Gerhard. Yes I definitely want to make the point that different tasks in woodworking can be accomplished in many different ways. Some ways are more efficient, and some are more peaceful and less dangerous, but you can usually get a job done with basic tools
Chris, you didn't give any commentary at the end comparing the power tool v hand tool approach. What's up with that? How long did each method take, which did you prefer, challenges of each, and so on.
Great video nonetheless.
Good point thats a missed opportunity for sure. I guess I got lazy there at the end after hours upon hours of editing and narration haha. This has taken me days on and off. I can tell you in a nut shell that I much more preferred the hand tool side. I honestly dont think it took me a significant amount of time longer. cutting the tenons and tongue on the table top was a breeze and very enjoyable, but plow the groove and boring out the tenons was definitely hard work. For me it is always more rewarding and enjoyable when I complete a task with hand tools, but there are certain things that powertools are worth using. For instance router out the groove was substaintially easier than plowing it with the plow plane haha. Ill try to remember to do that commentary next time! Thanks Hazem!
My impression, from watching the video, was that both finished products worked out well ... so which approach one prefers would really be determined by the tools, skills, and how you want to spend your time working
....and the amount of noise the neighbours can stand :)
And the amount of dust you can cope with. Mine's an attic workshop so dust is a problem. Dust extraction would be expensive, difficult and take a lot of already limited space. So hand tools are the way I've gone.
Thanks for the comparison video. I prefer hand tools these days but always find men standing around with comments like, "don't you like electricity", or "you would be finished in 20 minutes with power tools". Gets old pretty fast, it's nice to see someone proficient in both and to be honest sometimes a blend of the two is the handiest.
I bought this for my friend for his birthday as we just moved into a new house and he finally has room for a workshop. The bench was very easy to set up ua-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh They center support is a little difficult to snap in and out of place at first but at least then we know the bench is secure. It was a pleasant surprise when we saw it came with clamps. I apparently missed that in the description. My friend loves the versatility of the bench. Great starter bench for his workshop and easily transportable all over our property. I wish the bench was a little taller but the other features of the bench more than make up for that.
I really enjoyed your narrated and step by step video. I get so tired of turning on a video and seeing it in high speed and no explanation of what and why they are doing something. Just a great video. Thanks so much. David
I absolutely LOVE the hand tool vs. power tool format!!! Please do more like this. Not only do you get to see how to do both, but you can mix/match techniques depending on what you have in your shop to work with. Love it!
Hands down the best woodworker on UA-cam!
Very well explained. Thank you. I am presently building a harvest table & will be doing breadboard ends.
Recently bought 5 Douglas fir doors from the early 1900’s that could have possibly ended up in the dumpster and repurposing the lumber.
Anyone who has worked with today’s lumber cannot appreciate the high value of old growth trees from 100 years ago.
You are a young man & already possess the fine qualities of a good woodworker and can only hone your skills even further.
Your common sense approach to the discipline of wood & tools is a great example to anyone watching this video that wants to get done
The proper way.
Victor from Canada. .......thanks for your time & consideration.
I click like before watching every video because they are so well done.
I hardly own any hand tools because of the skill and coordination required. I fully get the appreciation folks have for them and respect those who take the time. It's a lot quieter, which can make a big difference of you have children trying to sleep and stuff. Hats off to a super strong breadboard. Love the thought and engineering that went into it.
You should get yourself some more hand tools. They are a blast to use!
Hand tools are for the true craftsman, and not only requires good tooling, but lots of talent from years of experience. Power tools are for quicker build times, and the quality of the job is determined by the builders efforts and accuracy in setting up the machinery correctly. Once this is done, electricity takes over. (Thank you Benjamin Franklin.).
Thanks for a good video.
I know the video is a little older but I felt that I should comment. I think what you have done here really shows that whatever tools you have your disposal and you can afford are the right tools. Certain tools, power or handtools, are better for certain jobs. It was nice to see that you don’t have to necessarily be committed to one or the other and you can appreciate working with both. Great video.
Thanks Jeremy, thats definitely a point I want to make for people
I have always been a power tool junkie, but the older I get the more I appreciate hand tools and the old ways of doing things, and you gave me the drive to learn the old ways even more. You are a fine craftsman and I really enjoy your channel!
Thanks so much Tony. It is definitely a super rewarding experience for me when using hand tools and my own practiced skills to build something. It feels great when I am done.
I'm a girl and a bit shy of power tools. But my past life in the Victorian times has led me to love furniture that was crafted this way, I like furniture that is sustainable and can be reused for centuries. Unlike the garbage today that gets thrown out in the trash. I searched this video because I found an antique draw leaf table missing its leaves, and it is built with breadboard ends. So.Now I am in search of some hand tools to try my hand at what you've done in this video, which is amazing and so much appreciated .
Masterfully done! A Craftsman knows how to wisely use both hand and power tools... GREAT example!
Chris you are a real craftsman and a natural teacher. Great work sir.
Fantastic job and great explanation of the project.
I watch this video about every three months. Based on my UA-cam search history it keeps popping up as a suggested video. A pure joy to watch. The hand tool side is my favorite and a big reason I’m converting over to using more hand tools in my shop over the power tools. Good call quitting your day job!! 👍🏻
Excited to see you using that little slick. I work at a small timber framing company, and we all carry 2” wide chisels and use them for anything we can. They can be monsters or persuasion tools
I enjoy watching stuff like that, give ppl new idea, that others don't know about!
Chris, great video. This comment is late as the video was posted two years ago but to cut the mortises I use a forstner bit of the width I want and after the first plunge to depth, advance the board 1/8 in at a time the bit will cut just fine and when done the mortise only needs a chisel run over the surface in case of any stray fibers left. This worked fine for a 3/8 wide mortise. Needs to be done in a drill press set up with a 90 degree fence so the board is perpendicular to the wood and just needs to be moved along as needed. Also round over the ends of the tenon sides so I don't have to square the mortise ends. Thanx again
I watched the whole video of you actually making that table. Sick, bro. Sick.
Awesome love watching u work,i see im not the only woodworker who lives in a subdivision with an HOA
Square Hole Mortising Drill Bits are what you were looking for
Di Wu - Norm Abrams approves of this comment.
That’s what I was thinking
He said “regular, affordable, power tools”…. I agree with the power mortiser and am saving for one myself, but even a decent quality one isn’t really regular and affordable IMO. What may work for some guys in a short term is a power mortise attachment for their pillar drill ~$200 for decent one with bits; just keep in mind that this is more of a solution for floor standing drills since table top pillar drills don’t have enough throw in the quill to have an effective mortiser. The table top pillar drill really hits its max effectiveness with a mortiser attachment in the 1/4” mortise range like in rail/stile cabinet and small furniture.
Just my 2¢
Nice video.
I love the contrast between the noisy screaming power tools vs the sweet symphony of hand tools
Yes, its the exact reason I alway grab the hand tools if I can help it.
Great plans! Building this table is Ash. Godspeed
I am a new subscriber and wanted to say I enjoy watching, you showing both hand tools and power tools is vary helpful seeing how I am just starting to get involved with woodworking and don't have a lot of either just a littel of both.
Just found this channel and instantly hooked
I don't know what I like more, the way the table turned out or that B-E-A-UTIFUL GMC out front.....great videos bud...very helpful!
haha. yea I sure do like that truck. Unfortunately its in the body shop right now because some druck driver smashed it while it was parked on the street
Third Coast Craftsman Dang dude, sorry to hear that. Y'all catch the moron?
Enjoyed this immensely. Thanks
You sir, have ninja woodworking skills - beautiful work.
You're an excellent carpenter with more patience than I have. Keep at it. Look forward to more.
A few years ago, I fumbled my way through the power tools version of breadboard ends. After watching you do it, I’m glad to see I didn’t do it completely wrong. But, it would have been nice to have you there to point out how I could have done better! Amazing job!
Impressive woodworking skills my friend.
Thanks bud. I definitely appreciate that coming from a fine woodworker as yourself!
Well done Chris. Those tenons look stout. Myself... I'm a hybrid woodworker and use both to get whatever task accomplished the fastest with the best results. I find that I use power tools during the day and then hand tools at night after I tire of the noise. That stated I get great pleasure from using scary sharp hand tools no matter what time of day. :)
I watch a lot of videos on line, yours by far are the most professional I have seen. Done very well on all aspects. Very talented wood working skills and a joy to learn from. I just found you this morning and you have a new fan. I install hardwood flooring and I am always looking for a way to grow my skill sets. One of the hardest things I deal with on a daily basis is not being given enough time to do my job the way I would like as far as quality is concerned. I consider myself a perfectionist, a gift sometimes and a curse too, but that is how God wired me I guess. Thanks for the work put into video form for all of us to learn from. Ed
Wow, thank you very much for the kind words. I really appreciate that I love that you get some enjoyement out of them. I am totally the same way as far as being a perfectionist, and that can hurt your profits for sure as time is money and the longer you spend on a job the less you make. But I cannot sell someone something unless Im truly happy with it. But keep being a perfectionist sir, it means we sleep better at night knowing we did a job well done :)
Chris, This is wonderful. You expertly explain the breadboarding purposes, techniques and process. Thanks.
Thank you, the whole narration part has been a struggle for me, Im glad to hear I am on track haha.
Great demo of making bread board ends with a variety of tools.
Thanks Bill much appreciated
Just shows that there is still a need for hand tools in modern day woodworking. Amazing!
Incredible work call mom came out looking fantastic! Super helpful seeing both methods as well, thanks for posting!
A really enjoyable comparison, lovely result. Nice, Chris!
Thank bud!
I think the finished product shows the craftsmanship involved regardless of what tools you use to accomplish it. I cringed when the router started plowing out the groove, the hand tools way was much quieter and seems like the way to go, but so so so much work. Pushing that plane sure makes your arms look good tho, maybe I need to do that more. I bought a camera to make videos a few years ago and still haven't figured out the process and I hear so many talk about the time it takes to edit etc. You've rapidly become my favorite woodworker. Great job as usual. Another fine video from my favorite woodworking team. Be sure to give Utz an attaboy from me.
That was a fantastic, clarifying and enjoyable watch. Thank you. Subscribed
I've never heard of that type of joinery before... looks really interesting!
which type? drawboring or the breadboard?
Being an older, non trained, retired lineman who has patiently builds things, i loved how you built that one end with hand tools. i wish i could have had a dual trade because it would have been wood working. thanks
Nice trick with the straight edge and the saw. Also a good reason to have one with a high angle handle/deep blade.
You're highly underrated. Your work is amazing.
I like the chamfered edges also. Gorgeous build!
Very good cinematography. Good approach to comparison, using a single item with two sides that allow comparison.
Thank you, I was hoping do both sides with a different approach on each side would make for a good videi.
Great job on the table. I don't own a brace or auger bits so don't feel bad about the drill. You use what you've got!
We are not worthy!! Lol. Great job man. Your a great teacher!
Hi Chris - Great video and fantastic workmanship. Its great to see someone using hand tools with such skill. I think you demonstrated that they are not really much slower than power tools but with so much more satisfaction. Love the draw bored dowels - I have just completed a new workbench with a laminated Bubinga top on a Mahogany base. I used draw bored oak dowels for the complete assembly and it is so solid. Keep up the great work - Dave
Greetings from Ireland. I'm a hobby woodworker and within the next few weeks, I'll be starting to make my first ever tabletop with breadboards. This video was just great and I picked up so many tips from it. I'm sure I'll be referring back to it often during my attempt. I'll be using Wych Elm which is very hard but beautiful.
Many thanks.
Awesome Alan, I am glad you found the video helpful. hopefully you can send me pics on facebook or instagram once you get working on it!
Something about hand-tools make it look more relaxing to do. I have very few power tools, but collecting some hand tools to get into some woodworking. Just feels right to me. ;-)
Really nice work.
Hey Chris, just revisiting this video on the breadboards and getting all the ideas in my head to do the same on a project in the near future. I will be taking the all hand tool approach myself as I have limited space in my rented one car garage. I want to thank you for all your videos and great content that you put out. As mentioned before, I am building many of my hand tools as well. I am looking into the bowl blank suggestion from before. As always awesome content.
You do beautiful work. Thanks for sharing.
One of the few videos that I have watched multiple times and enjoy. Thanks Chris
good work, very handmade, which adds value to the piece.
Thanks Armando
Very nicely shot, great video. Thanks
Thank you. Means a lot coming from such a great woodworker as yourself!
Well thank you very much, but I am really just a knucklehead with a chisel and a camera having fun ;) Keep up the good work.
haha. Yea me too, just causing ourselves more work with these dang cameras!
Best breadboard end techniques.
Dude, excellent video! This is one of the best woodworking videos I’ve ever watched on UA-cam!
Really good work, I like your quality of the video. Thanks
One of the better breadboard and videos I've ever seen brother. Great job. Love the channel keep up the great
Thanks so much dave. That means a lot man!
Great vid, awesome build, entertaining to watch, and I really appreciated your ability to clearly explain WHY you did what you did while you were doing it... that is SUPER helpful to newbies.
Thank you so much for the thoughtful explanation of both. I was hesitant to try breadboard ends, but now feel confident I can do it. My table top is only 7/8" I think it should work with the proper calculations. Thanks again!
Great job explaining everything thank you very much
I just watched two of your videos and learned a tremendous amount on how these tables are made. Subscribed!!! An excellent table and fantastic video. I'm sure I'll be referencing your videos often as I plan on making a similar table from 100 year old tobacco barn timber.
Hey Michael, I am glad you found the videos and learned some stuff. Thanks for subscribing and good luck on your table!
He is a very good quality craftsman . Well explained videos. or tutorials.
Excellent video and I appreciate you covering it with multiple approaches!! Great job and your table top with breadboard is awesome!!!
Interesting video. I like how the table looks.
Im excited to see how it turns out with the based built. Ill be posting a video of that too.
I normally don't commit but really enjoy watching your work man . 👍 & subscribe
Very well done. Absolutely gorgeous.
Thanks Kory!
Great instructional video for both techniques - clearly presented, with some good tips on how to proceed correctly. Thanks. Might try this in a future project!
Thank you for our GREAT WORK.
Thanks, Chris. I’ve seen these techniques before but something about the combination of your shots and voiceover gave me some new insights.
Hi Adam, thats awesome, im glad you were able to get something out of it!
By the way... surfing today I found this. Are you aware that you’re "Big In Japan"? ua-cam.com/video/KlS6vuN93JM/v-deo.html
Adam Aronson oh my gosh! They stole my video!!! Haha thanks for letting me know!
I suppose that's a compliment. ;-)
Will be building my first table soon thanks for the great video
NIce video- thanks for sharing...
Un-stinkin-believable! Your patience and skill with the handtools is remarkable! And the finished product looks incredible! I loved the little chamfer highlight you did to accentuate the breadboard ends. So what was the time difference between using both methods?? Did they really turn out as identical as they seemed in the video? Or were there some pros and cons of going with any particular method? Amazing job, Chris!
Whats up Drew! I appreciate the kind word friend! I am really liking that chamfer too. I was super worried Id ruin the entire top by doing that, but it turned out nice. cutting the tongue and tenons on the table top goes to the hand tools. It was probably the same amount of time or slightly longer, but it was WAY more enjoyable, and very accurate. The breadboard ends goes to the power tools. plowing the groove and boring those mortises by hand was a LOT of work haha. Both sides really did turn out great (thankfully as this is going to a client) There is not distinquishable differnce between them
Utz is a gorgeous pooch! Love the eyes and chocolate fur..
Beautiful craftsmanship, detailed commentary, and great video. Subscribed!
This was mesmerizing and inspiring, thank you
Thanks Linda. Inspiration is one of my goals in these videos!
That was a lot of fun. Thanks. I've been a furniture maker for 30 yrs and it's always fun to hang out with other woodworkers in there shops and see there tools and stuff. Good job!
Thanks so much Daniel. A furniture maker for 30 years!? I sure wish I could come hang out in your shop, Id learn a ton!
Hi Chris
Just found you and subscribe, here in England I do the very same work as you and I can't believe what a pleasure it is watching someone else doing it, this site is going to be my new past time keep up the great work mate and the laid back way you do it 🇺🇸🇬🇧
Thanks Jim. I agree I always LOVE watching woodworking videos, especially ones with lots of hand tools. Thanks for subscribing and the kind words!
The top looks wonderful.
Thank you Jim, I gotta agree, I am SUPER happy with how it turned out.
I came here trying to figure out what a bread board was. I stayed because of some awesome techniques and tips
I really enjoyed your video very much Chris. Thank you for sharing and the comparison as well
I've watched a lot of your videos your a great woodworker I hope to be this good one day l!!!
Nice work. I once fixed breadboard ends before I learned of the movement that happens. So far the project is still intact. I flooded it with mineral oil, it seems to have a more stable moisture content. It is an island top cutting board basically.
Well explained and enjoyable vid. Great to compare the two methods. Cheers, Rob.
Thanks Robert, Im glad you enjoyed the video!
Excellent skills are impressive and beautiful. No matter how much I aspire, I don’t think it’s in me!
Great work! This has become one of my favorite channels over the past couple weeks. IMHO you sir are underexposed in the youtube woodworking world. I'll be sharing links in the future. Thanks you for your great work.
Wow Richard, thank you so much. That means a lot to me. I am glad you like the videos, and hopefully as time goes on and I put more stuff out there I will continue to grow. Comments like this really keeps me motivated so thank you!
You are skilled, my man. Great work. I personally prefer hand tools, maybe more time is needed, but I believe there is more control using good hand tools. Only problem is I don't have the skill that you possess, so I'll just watch in awe. Great video
Instead of using a chisel or spokeshave to whittle the ends of dowels, I keep a pencil sharpener in my tool box (for sharpening my pencils 🙂) and use it to trim the ends of the dowels. Works great!
Nice work and nice video! That should be an awesome table.
Great video, loved seing both methods, gives me options in the future.
Great inspiration! I just started doing woodwork at home and your videos has been really helpful!
Beautiful work.
Awesome. Working on a cutting board and my homemade tablesaw isn’t accurate enough for doing it so I was trying to figure a good way todo it with hand tools
In another life I worked for a high end furniture manufacturer. The place was 100 years old back then and I have never seen such a collection of craftsman in one place since. I was there for 3 years and got the wood working bug. The company went broke. Fast forward 40 years and three other careers, I'm semiretired and for the last 18 months I have been collecting tools and building a small work shop. I put the word out that I was taking orders and my daughter said she wants a large table for the 6 of them. My plan is to make a 1/2 scale table as practice first. I have your plans and I'll keep you posted.
Can't remember the last time I watched a 17 min video without fast forwarding, good work!
17 mins IS a long video for sure. Makes me happy that the content was engaging enough that you watched all of it. Im on the right track! :)
Great video and I'm happy I found your channel. I liked that you approached the task with different tools, not so much for comparison, but rather for its educative merit. Great to see how you can acheive the goal through different means :)
Thanks Gerhard. Yes I definitely want to make the point that different tasks in woodworking can be accomplished in many different ways. Some ways are more efficient, and some are more peaceful and less dangerous, but you can usually get a job done with basic tools
Great video and skills! Thanks for sharing
Thanks Stavros, much appreciated friend!