It's so rare that I watch a UA-cam video and within 1 minute of watching it, it completely solves my technical issue, but that's what happened in this case. Thanks for the video!
Aw dude!!! You're a life saver... I only realised there was noise in my recording after EQ and compression... On a perfect take, I'm sure we all know how depressing the thought of re recording is when you've nailed your performance... I just tried your method and in 20seconds my issue is GONE... THANK YOU!!
I recorded a whole song today with multiple guitar tracks without noticing I was getting static from my gain and a hiss from my AC and this fixed it both I just demoed the plugin but I have to go run and buy it fast. I have messed around with Izotope RX and it is way to confusing this was so straight forward thank you!
no more editing in adobe audition for noise removal for me yay! this thing does the same thing if not better! and now i don't need to remove noise for every audio file, i just pop it on the whole track or bus and BAAAAM no noise. and best part about this plugin, is that it doesn't just remove the in-between noise level, it actually removes the noise from over the top of your recording too, with the right settings of course. but took me like 5 min to get it right without sounding like i just crushed my audio file! Very happy, a must have!
Hey my name is pro Kenny rush thanks so much very much I don't know how to appreciate u,you have really changed my a lot in my production much love from Africa Kenya 😍😍😍
DANG. IT! Now I gotta spend more money on a plug in. hahaha, in all seriousness, I love these kinds of videos, Josh! Thank you so much for sharing them!
6 років тому+1
bạn hướng dẫn đúng nhất. Cảm ơn bạn rất nhiều. Mình cũng hay dùng plugin này nhưng làm sai cách.
In the last part of the video where you’re using ProTools and the girl is talking in the scene, after using the plugin I notice there is still room noise left. It definitely sounds better, but how do you eliminate ALL of that room noise so that it’s not noticeable at all? When I’m watching a film or show for example, I don’t notice any room noise at all whatsoever, so I want to know how to get a result like that out of my vocal with absolutely no room noise noticeable.
I have that one...it actually destroys the upper frequencies really badly even when the noise suppression is at 0. Just having it on the track destroys the audio instantly, on a somewhat clean take. HOWEVER....IF the audio is that bad....wow! It works really well...but you have to use a low cut filter because it won't take noise out of the lows as well as it does the highs. That's where I actually go with WNS or just end it all with RX for fine detail work in Post.
@@kalvenzander4710 I'd have to hear that vocal myself but, this plugin is really meant for live noise reduction. What you need is an external processing program like iZotope RX. It's significantly more expensive but it gives superior results.
In all probability it is because noise reduction through the plugin happens in real time. I would suggest that you add the X-noise first in your signal chain of the track, then render it and then do the rest of the processing on the rendered version
@@anshuljain8515 hey man thanks for the video but i seem to have the same latency issue could u further explain how to fix it i did not quite understand your reply what do u mean by adding it first then rendering it
@@rakbeatz4196 hey man.. What I'm suggesting it is to first add X noise in whatever audio you're trying to clean up. Only add X - Noise as the Plug-in and nothing else. Then adjust the parameters when you feel happy with the result. After that, in logic it's called "bounce in place" . What this does is it creates a new file with the processing applied and you can use this in your project without any latency issues.
This is great! Thank you so much! Can you tell me how to get rid of the latency when using the plugin? I have it on my mic channel, but my voice is lagging behind as I'm speaking. Should I wait to use this plug in until I'm done recording? Thanks so much!
Only use the plugin AFTER recording / editing your clips. It's also always best to keep playback switched off in your DAW. You'll always hear latency, no matter what latency setting you use! Secondly, using play back with plugins enabled is never a good idea, as your voice will be misrepresented. You need to hear when you're making mouth clicks and other unwanted sounds. Try to just bring your headphone volume up on your interface, so you can hear yourself properly. Hope that helps! :)
I use a plug-in by Audionamix called Instant Dialogue Cleaner (IDC) which helps with background noise especially during dialogue. It focuses on recognizing speech and separating it out from the background noise. Here is a video on youtube about it: ua-cam.com/video/jdyAO6Po8u8/v-deo.html
My background noise is bad it’s a static sound I have tried everything every UA-cam video but nothing help me so I’m going to try this and hopefully it works
X-Noise is almost always used for audio post-production (dialog) and for voiceovers. I've never used it on singing vocals if that's what you're talking about. If you're recording in a proper space, and applying the proper edits (or gating) to the vocals, you should never need to apply noise reduction to sung vocals.
Thanks for sharing your knowledge! God bless you! And please remember the following: For God so loved the world that he gave his only-begotten Son, so that everyone who believes in him should not perish but have everlasting life. Because God did not send his Son into the world to condemn the world, but so that the world would be saved by him. He who believes in him is not condemned; but he who does not believe has already been condemned, because he has not believed in the name of the only begotten Son of God. John 3: 16-18
Finally I learn about a plug in that doesn't completely fuck up your vocal when trying to fix it
It's so rare that I watch a UA-cam video and within 1 minute of watching it, it completely solves my technical issue, but that's what happened in this case. Thanks for the video!
Aw dude!!! You're a life saver... I only realised there was noise in my recording after EQ and compression... On a perfect take, I'm sure we all know how depressing the thought of re recording is when you've nailed your performance... I just tried your method and in 20seconds my issue is GONE... THANK YOU!!
I recorded a whole song today with multiple guitar tracks without noticing I was getting static from my gain and a hiss from my AC and this fixed it both I just demoed the plugin but I have to go run and buy it fast. I have messed around with Izotope RX and it is way to confusing this was so straight forward thank you!
Man this is about the 10th time you've sorted out the problem I was having !! THANK YOU ;-)
no more editing in adobe audition for noise removal for me yay! this thing does the same thing if not better! and now i don't need to remove noise for every audio file, i just pop it on the whole track or bus and BAAAAM no noise.
and best part about this plugin, is that it doesn't just remove the in-between noise level, it actually removes the noise from over the top of your recording too, with the right settings of course. but took me like 5 min to get it right without sounding like i just crushed my audio file!
Very happy, a must have!
Hey my name is pro Kenny rush thanks so much very much I don't know how to appreciate u,you have really changed my a lot in my production much love from Africa Kenya 😍😍😍
You are really a good teacher
DANG. IT! Now I gotta spend more money on a plug in. hahaha, in all seriousness, I love these kinds of videos, Josh! Thank you so much for sharing them!
bạn hướng dẫn đúng nhất. Cảm ơn bạn rất nhiều. Mình cũng hay dùng plugin này nhưng làm sai cách.
Thank you. Nice video
I have a question. Your voice was so clear. Which mic you used in this video? Can you tell me the model?
Wow...this is really helpful. Thanks bro
In the last part of the video where you’re using ProTools and the girl is talking in the scene, after using the plugin I notice there is still room noise left. It definitely sounds better, but how do you eliminate ALL of that room noise so that it’s not noticeable at all? When I’m watching a film or show for example, I don’t notice any room noise at all whatsoever, so I want to know how to get a result like that out of my vocal with absolutely no room noise noticeable.
Thank you very much. Greetings from Belo Horizonte, Brazil!
You can never go wrong with Waves 😄
Brilliant thanks very much from the UK
I actually like the NS1 plugin from Waves. One fader that kills a lot of that and I think it's cheaper.
I have that one...it actually destroys the upper frequencies really badly even when the noise suppression is at 0. Just having it on the track destroys the audio instantly, on a somewhat clean take. HOWEVER....IF the audio is that bad....wow! It works really well...but you have to use a low cut filter because it won't take noise out of the lows as well as it does the highs. That's where I actually go with WNS or just end it all with RX for fine detail work in Post.
@@kalvenzander4710 I'd have to hear that vocal myself but, this plugin is really meant for live noise reduction. What you need is an external processing program like iZotope RX. It's significantly more expensive but it gives superior results.
You’re the best man!! Thanks!
Do you know if there are plugins like that for garageband?
This is an excellent presentation.
Do yoy know why is there latency problems when I add the x-noise plugin in to a track ??
In all probability it is because noise reduction through the plugin happens in real time. I would suggest that you add the X-noise first in your signal chain of the track, then render it and then do the rest of the processing on the rendered version
@@anshuljain8515 thank you!
@@anshuljain8515 hey man thanks for the video but i seem to have the same latency issue
could u further explain how to fix it i did not quite understand your reply what do u mean by adding it first then rendering it
@@rakbeatz4196 hey man.. What I'm suggesting it is to first add X noise in whatever audio you're trying to clean up. Only add X - Noise as the Plug-in and nothing else. Then adjust the parameters when you feel happy with the result. After that, in logic it's called "bounce in place" .
What this does is it creates a new file with the processing applied and you can use this in your project without any latency issues.
Anshul Jain my daw is fl studio
This is great! Thank you so much! Can you tell me how to get rid of the latency when using the plugin? I have it on my mic channel, but my voice is lagging behind as I'm speaking. Should I wait to use this plug in until I'm done recording? Thanks so much!
Only use the plugin AFTER recording / editing your clips. It's also always best to keep playback switched off in your DAW. You'll always hear latency, no matter what latency setting you use! Secondly, using play back with plugins enabled is never a good idea, as your voice will be misrepresented. You need to hear when you're making mouth clicks and other unwanted sounds. Try to just bring your headphone volume up on your interface, so you can hear yourself properly.
Hope that helps! :)
I LOOOVE your channel! thank you so much!
What if u eliminated hiss with a noise gate but wanna wanna eliminate hiss when an instrument comes in with this ?
Hello, thank you for your video's, Is it advisable to use this on the Master Bus and if so where in the chain?!
What its the different of xnoise and Znoise?
much better than ns1
Fantastic tutorial, thank you!!
Thanks sooo much.... this video helped me out a lot
Great tutorial! Thanks!
very well done tutorial!
Thanks for the tutorial man!
Massive thank you mate!
Thank you so much :) Great tutorial.
Is there application work with phone can remove noise audio ?
Is there any alternative method reducing noise like fe. using Expander or some similar stock plugin?
Logic has a Denoiser that works for basic things, but not anywhere near what X Noise can do.
At which stage of the mix/mastering is it best to use this plugin?
I mean before or after EQ/Compressor, etc..?
thank you sir!
I use a plug-in by Audionamix called Instant Dialogue Cleaner (IDC) which helps with background noise especially during dialogue. It focuses on recognizing speech and separating it out from the background noise. Here is a video on youtube about it: ua-cam.com/video/jdyAO6Po8u8/v-deo.html
My background noise is bad it’s a static sound I have tried everything every UA-cam video but nothing help me so I’m going to try this and hopefully it works
Thank you 🙏🏻
This sucker plugin is monopolized.
Is a buy it or get lost.
is this worth getting ?
Thanks
great video!!!
this one is less cpu intensive then the rx one
Great vid thanks !
This is already Acon Digital Deverberate plugin does pretty good job and also fl studio edition does much much good job no need waves or ocean 😂😂
No need grammar either, apparently.
Wtf so you do a video about x noise and completely ignore using it on vocals when recording , jusssst great
X-Noise is almost always used for audio post-production (dialog) and for voiceovers. I've never used it on singing vocals if that's what you're talking about. If you're recording in a proper space, and applying the proper edits (or gating) to the vocals, you should never need to apply noise reduction to sung vocals.
thx man!
Anyone can remove noise old audio please
Thanks a lot sir :)
Couldn't you just use a noise gate?
on mastering it´s just different, that´s why this plugin exists by the way
Free X noise link please💌💌💌
Wicked !
Adobe audition is so much better than this.
Thanks for sharing your knowledge! God bless you! And please remember the following:
For God so loved the world that he gave his only-begotten Son, so that everyone who believes in him should not perish but have everlasting life.
Because God did not send his Son into the world to condemn the world, but so that the world would be saved by him.
He who believes in him is not condemned; but he who does not believe has already been condemned, because he has not believed in the name of the only begotten Son of God. John 3: 16-18
Free X noise link please💌💌💌
Free X noise link please💌💌💌