HOW TO REGLAZE a FIBERGLASS / ACRYLIC BATHTUB | Tub Reglazing & Refinishing Time Lapse | DP TUBS
Вставка
- Опубліковано 27 січ 2022
- Here is a straight forward bathtub reglazing job. No major repairs.
I start off by sanding / cleaning with a 100 grit wet sanding block to remove any loose dirt and soap scum. Then I dry it off with some paper towel before sanding again with 120 grit dry sand paper to scuff up the surface to prepare for primer. Once I wipe it down and tack cloth it we start taping and masking off the bathtub to get ready to start sparying the primer before refinishing with the top coat. I spray two coats of Resurface solutions Euro Epoxy Primer and then two coats of Resurface Solutions ISO FREE Gloss White Top Coat. Hope you enjoy...feel free to ask any questions in my DM on instagram or here in the comments.
FOLLOW ME ON INSTAGRAM: / dp_tubs
Products Used in Videos on this Channel:
Material Used:
Titan Capspray Compresson and Spray Gun: amzn.to/3rmhEm0
Bondo Fiberglass Resin: amzn.to/3rneluX
Bondo Fiberglass Mat: amzn.to/3nNUjXZ
Bondo Glass Short Strand: amzn.to/3xlYuh0
Ryobi Corded Drill: amzn.to/3xkf3K6
HDX Mixing Cup 32oz: amzn.to/3p0JD7L
2" Paint Brush 24pk: amzn.to/3nLdZMd
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet: amzn.to/312NYzi
Bondo Spreader Pack: amzn.to/3HNIEAJ
Bondo All-Purpose Putty: amzn.to/3CPE29p
Zinsser 1-2-3 Primer: amzn.to/3oXAmO2
Krylon Alternative: Rustoleum Tub and Tile White: amzn.to/3FFTcQi
Caulking DAP Stretch: amzn.to/30YsZhe
Napco Extra Strong Acid Etch: www.napcoltd.com/case-extra-s...
Jasco Paint and Epoxy Remover: amzn.to/3xniGik
Loctite Foam Gap Filler: amzn.to/3xkgTuu
Capspray Titan Compressor 75 / 95:
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051: amzn.to/3CUJo38
3M Half Mask Reusable: amzn.to/3DSmomO
3M N95 Respirator Filter 10pk: amzn.to/3cNv9CI
3M Cartridge Replacement Pack: amzn.to/2ZpjhUq
Fume Exhauster 8" Duct Tubing: amzn.to/3cKe64v
Portable Ventilation Exhaust Fan here: amzn.to/3k5Gz5W
Tack Cloth: amzn.to/2Zks2yT
Rustoleum Appliance Spray White: amzn.to/3r8Iw8T - Навчання та стиль
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
hello very nice work a question when you put primer you paint the same day or until the next day?
Nice
i have a steel tub that has a slight dip that holds a little water after draining. how do i level that out so it wont hold water after i glaze it?
Sir, how much should I expect to pay to have this done in the tub only? Also, is the peeling from the old glaze dangerous to one’s health? Thank you!
What paint do you use after the primer?
You can remove the drain hardware and overflow cover ... I mean its one screw in the overflow trim, faster than taping it.
Some customers don’t want to pay for the trip back to put it on. You do what the customers will pay for when it’s not your own. Right?
Hi , what epoxy paint you use ?
Great video thanks for posting. What primer do you use and do you thin it for the spray gun? I know you've used the Zinner 123 from the spray can before. Cheers
I might have mentioned in the video description but I use Resurface Solutions Euro Epoxy Primer and there is not need to thin it out. If I spray Zinnser out of my gun it definitely needs to be thinned with water quite a bit to spray out of the gun ok. I have started using the Resurface Solutions primer topcoat combo and the results have been amazing.
@@DPTubs thank you so much. Amazing info
Can I do the resurfacing by rolling both the primer and finish coat. I dont like sprayers
Ive recently almost burned down my house due an accident. I had to throw a flaming blanket on the tub to quench it. my tub had some deep burn marks and some melted parts. Do you have any suggestion on how to go on and fix it? im afraid if i sand it that its gonna make a hole on it cuz idk how thick a tub is
Don't risk it. If there's extensive damage, your tub may no longer be structurally sound. This means you could develop leaks or break through the tub. Call a pro refinisher to come look at it or just replace.
How can tell if it’s either?
Will you do another q&a sometime or is there a way to message you directly? Had a few questions I'd like to get another perspective on.
I will do another Q&A soon
How long after completion can the customer use the shower? Also what do you charge for a tub like that? Thanks
48 hours!! I charge $395 but depending on where you live and competition it can range from $250-$500.
Hey is it normal that dust gets on your hand when you slide your hand over the finished bathtub?
Yes but it’s not normal after you rinse the tub.
Hi Danny I'm a big fan of your work, why no more videos?
More videos coming up! I been very busy sorry
Making that money lol
Es todo Danny
Great repair vids. Got the bondo down on hole in fiberglass tub, now wondering where i can get spray paint to match? Unfortunately not plain white, but almondish maybe slightly darker color ... suggestions what to use and where to get that color would be appreciated
You can try Rustoleum Tub and Tile Bone or Bisquit for DIY! If it’s professional grade you might be able to get Bone color from Resurface Solutions out of Texas
@@DPTubs ill give that a try. Thanks again
Marine paint.
I would like to learn this trade. Is the business in demand and recession proof?
I have the same question ???
It’s there only the spray can of the paint? Or they sell big cans?
They sell quarts and gallons depending on material and where you get it
@@DPTubs thanks replying ✅
Is the too coat you use, water based??
No! Acrylic aliphatic plotless urethane
@@DPTubs where can I get it from?
WHERE CAN I GET THAT REGLAZING Agent or paint?
Resurface Solutions
cheap work
cheap comment
@@DPTubs I got your attention , when you do something like that tell us about details, like what you use to clean the dust and speckles, after you prime it do you have to light sand it too, then when you paint 3 times and I hope you do that 3 times how long you wait between each coat, then do you buff the final product. the way you showing your job I will not access in any of my tub restoration, you work is only good enough for some rentals and not on price residents.