JUST GOT A RIG LIKE THIS FROM MY NEPHEW. IM LOOKIN AT AT LEAST 7 DTC CODES,MANY STEMMING FROM CKPS. THANKS FOR THIS VIDEO! IT SEEMS ITS GETTING HARDER AND HARDER TO WORK ON THESE VEHICLES!! BTW,I JUST REBUILT A 4.0 BECAUSE OF "DEATH RATTLE"... ID NEVER GOTTEN THAT DEEP BEFORE BUT DO YOU KNOW WHY ENGINE WOULD RUN EVEN LOUDER?? NO CODES,NOW. I DID GET DRITY EGR. CLEANED IT. GOT LUCKY. HAVE TO HOLD AT 2 K RPM TO KEEP RUNNING..IM AT A LOSS. ANY INPUT MUCH APPRECIATED. THANKS AGAIN!
@@Marty09933 thank you I'll have to try again It took way too long for me just to get 2 bolts for the compressor 2hrs I'll need to remove the skid plate to make it a bit easier.. and even then wow what a pain
@@chrisburrell8489 yea some of these can be a pain in the butt. Sorry to hear that. But yes just give yourself plenty of time and take it nice and slow Take a break if you get frustrated 👍
Hi @glock316 the vehicle was running rough and it was popping up code 0335 so customer wanted it change but it didn’t fix the issue. Thank you for watching I appreciate you
@@Marty09933 wierd i started it an hour later nows its normal ran her for 30 min on the highway shes cherry again hopefully.. thanks alot to your video you gained a subscriber 👍🏼
@@elvishernandez9230 awesome brother oh yea I forgot to tell you sometimes you have to reset the light if you had one on and something’s it will reset by it’s self after a while so glad it fixed it you should be good now. and thank you for the subscribe 👍
Outstanding! I could not have changed mine without your video!!
Hi Carlton Padgett thank you very much glad it helped you and thanks for watching. I appreciate you.
JUST GOT A RIG LIKE THIS FROM MY NEPHEW.
IM LOOKIN AT AT LEAST 7 DTC CODES,MANY STEMMING FROM CKPS. THANKS FOR THIS VIDEO! IT SEEMS ITS GETTING HARDER AND HARDER TO WORK ON THESE VEHICLES!!
BTW,I JUST REBUILT A 4.0 BECAUSE OF "DEATH RATTLE"... ID NEVER GOTTEN THAT DEEP BEFORE BUT DO YOU KNOW WHY ENGINE WOULD RUN EVEN LOUDER?? NO CODES,NOW. I DID GET DRITY EGR. CLEANED IT. GOT LUCKY. HAVE TO HOLD AT 2 K RPM TO KEEP RUNNING..IM AT A LOSS. ANY INPUT MUCH APPRECIATED. THANKS AGAIN!
Thanks man really helped me out big time! Great video
Hi Mrjbafterlife you’re very welcome and thank you for watching. I really appreciate you.
Good video.
Hi@@ridgerunner106 thank you and thank you for watching. I really appreciate you.
Were you able to get to it from the bottom front of the truck I'm going to have to do this on the ground?
Hi Chris Burrell yes sir and thank you for watching I appreciate you good luck you got this man
@@Marty09933 thank you I'll have to try again It took way too long for me just to get 2 bolts for the compressor 2hrs I'll need to remove the skid plate to make it a bit easier.. and even then wow what a pain
@@chrisburrell8489 yea some of these can be a pain in the butt. Sorry to hear that. But yes just give yourself plenty of time and take it nice and slow Take a break if you get frustrated 👍
What brand of sensor did u use does it need to be motorcraft?
Hi @@tonnyajuhnke4727 it probably would be better but this one was from O’Reilly. Thanks for watching. I really appreciate you.
What would the truck run like before you replaced it
Hi Chrisjordan it would jerk when accelerating thank you for watching. I appreciate you.
Is this the same technique for the 06 also? Not looking forward to getting the belt on again.
Hi Foborising not sure but should be pretty close I’m guessing thanks for watching i Really appreciate you.
Thanks Marty
Hi Joseph Zielke your welcome and thank you for watching I appreciate you
Yes thanks for taking the time to do this video
Ford makes everything so complicated to work on
Hi@@Ezstreet327 you ain’t lying some of this is ridiculous. Thank you for watching. I really appreciate you.
Why did you change it ?
Hi @glock316 the vehicle was running rough and it was popping up code 0335 so customer wanted it change but it didn’t fix the issue. Thank you for watching I appreciate you
@@Marty09933 okay I was wondering if you were having no start issues. What ended up being the issue with the running rough ?
@@glock316 I don’t know the customer picked it up and took it with him but he also was having a lot of transmission codes pop up
Damn clean the engine

Didnt fix my issue either… my truck still shaking idles fines and drives fine just shakes when i put it in gear..
Hi Elvis Hernandez sorry to hear that. Have you had your truck scanned ? see if it will pop up a code Thanks for watching. I appreciate you.
@@Marty09933 wierd i started it an hour later nows its normal ran her for 30 min on the highway shes cherry again hopefully.. thanks alot to your video you gained a subscriber 👍🏼
@@elvishernandez9230 awesome brother oh yea I forgot to tell you sometimes you have to reset the light if you had one on and something’s it will reset by it’s self after a while so glad it fixed it you should be good now. and thank you for the subscribe 👍