Hobbywing Max 8 G2 with 2250 in the Traxxas Maxx V2
Вставка
- Опубліковано 22 сер 2024
- Well you guys asked for it, the new Hobbywing Max8 G2 in the WideMaxx! STILL AWESOME!!! Links below, use them and if you order from Hobbywing Direct use code EXOCAGED RC for 10% off!!
Hobbywing Direct
Here is the info to order the Combo (Currently Advance Order)
www.hobbywingd...
Remember to use CODE: EXOCAGEDRC for 10% off!!!
The ESC here
www.hobbywingd...
MAX8 G2 ESC
Amain bit.ly/394C3W3
The 2250kv motor here (2s-6s)
Amain bit.ly/3NplG51
www.hobbywingd...
The 2500kv (2s-4s)
Amain bit.ly/38QPdWk
www.hobbywingd...
Traxxas WideMaxx V2
Amain bit.ly/3IWGEFQ (Blue)
Amain bit.ly/3Gvn3ei (Yellow)
Amain bit.ly/32UZ5eG (Rock N Roll)
Amain bit.ly/3rsee0M (Red)
Amain bit.ly/3sKVda9 (Orange)
Amain bit.ly/32VxGcz (Green)
All the Vitavon for the MAXX
Ebay ebay.us/W6iIey
CHANNEL MEMBER INFO
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
If you want to help support Exocaged RC, I have the other Affiliates, please click and check them out. Thank you
Abu Garcia bit.ly/3tndZV4
Armed American Apparel
Fishing Lures for Bass bit.ly/3MIFpvZ
EMP Shield bit.ly/3QmUGFv
Maui And Sons SURF Apparel bit.ly/3aD4Z7Q
Get Upside, I use this every time I fill up and just let it earn and fro till Christmas time and cash out. It works and once you get used to it, it’s an easy habit.
Click this link or use promo code 9H6W8 to get an extra $2.22 bonus the first time you make a purchase. upside.app.lin...
It’s really hard to beat Hobbywing. I’ve always had great luck with their stuff
The self rigting always cracks me up. Reminds me of a poor tortoise on it's back that just lost in a mating battle, lol.
Kinda like an old man getting up off the couch to . And to lazy to go turn it over .
Nice! I’m running a Max 6 and using the stock motor and stock gearing in my Maxx, definitely woke it up!
Did it make it any faster? If so what is it's top speed now?
Yeah i did the MAXX 6 and made my truck insanely quick. and on 4s I want to put this motor in as well and i think ill be set for 60mph
You can tell how smooth this is compared to stock combo Joe 😏 was this run on stock remote also💯 nice of you to share the fun😎
Your discount code still works. My esc died, and I found this video. Thanks a lot! Got the combo max 8 2250kv for $225 shipped.
AWESOME!!
thank you for this....your the first youtuber to put it in the maxx also
Awesome. I’m super happy with this combo in everything so far
Man that’s awesome! Slap a fan on the motor your golden golden all day ripping. 💪
At last a system that keeps relatively cool, that was nice to see Joe. 👍
With a fan you could run that thing till the wheels fall off 😆
Cool vid 🔥👍✌️
yep!!!
I have the same combo in my MAXX but I use the TRX-8960X motor mount so you can use the brace that comes with it to secure the motor on the back end.
Hey @pandamax. Does the motor mount from the original combo fit on these 2250kv Motor? Just ordered a Max8 G2 combo and i want to use the original fan and motor mount ( the pin system).
Greetings from Austria and Happy New Year
Cool, I was thinking about getting this system for my Sledge and maybe my XO-1 and future Infraction 6s v2 or getting waiting until Hobbywing releases a new Max 6 sensored with 4985 motor. My other option would be the Castle MMX 8s with 1717 1,650KV for the XO-1 and the Infraction. Keep up the good work Exo.
Mmx8s , with the 1650kv works awesome in maxx!!! Just now put 25/46 in it. Test today!
Use a thin none-shiny tape and stick it onto the motor and measure with thermometer on it, will show true temps. Measuring on shiny reflective objects with a lazer thermometer, gives inaccurate Temps.
Nice 'Can Can' at 4:40👋👋👋
WE said for years, hobbywing is the better system. 🤷 HW is in everything nowadays! Surface vehicles, planes, helis, boats, everything. The spektrum esc's are renamed HW. 90% of all manufacturers use rebranded hobbywing.
You should try one of these system in the hammer rey and see what happens considering the motor is very tucked away with minimal air flow in that rig
yeah its kinda blocked in
Oh yeah. Had to watch this again. Got one going in soon!
This will more than likely be going into my LMT roller
My stock setup is just fine coming up on a yr with the V2! But I do plan on updating
Great video but doesn’t seem like much performance gain over stock for a lot of $$$
It’s super smooth but I agree. The stock systems are getting better than in the past.
I run 50/25 with Trencher LP and it runs hot, same Max8 G2 combo!
WOW!!! I have my set for 45/26 gearing. Stock motor still doing about 65 plus MPH! I like the speed lol. GREAT JOB!! I may get this motor set when I burn out mine with all the viravon I have on it
just bought one for my kronos
What brand gears are you running? I tried the Traxxas steel gears with the pin on the first hole and stripped out two gears
Cool combo and nice test video!! 😀
Thank you
Could it be running so cool because it's a 6s system on 4s well I guess the esc at 160amp could probably handles 8s.?m
It runs cool on 6S as well. This system just runs really cool
@@ExocagedRC I cant wait to find out
do you think the max8 g2 2500kv would suit it as well?
What pinnion were you running in the sledge with this combo please
18t
Exo, this is an awesome vid. I have the max8 installed in my v2 maxx already and I’m thinking of getting the g2 2250kv motor. Are you running the stock 50k/20m/50k diff fluids?
I tried to do something very similar Joe, I have all the Vitavon just the same. It chewed up a Castle 1515 and fried it on 4s. Never even got to run it on 6s. I haven’t touched it since, so thank you for revisiting this. How did you get the gearing to mesh? Only reason I asking is because I couldn’t get anything smaller than a 25 or 27t pinion because the motor mount wouldn’t slide down far enough to mesh on a 46t. My only solution was a a Castle 1717 that would take it.
It’s on the first pin and meshes fine for me.
We’re ya fans
none on the motor only one on esc
Please someone help! how do i mount the hobbywing 2250 in my traxxas maxx???
Run it on 6s and let's see them temps.
I tried but my darn 6s wouldn't fit the stock battery tray
Any sugggestions on rear shock on v2, tried traxxas all springs for it and 50-80wt oil, diffrent rebound etc.. It still kicks up the rear of it
having the vitavon gear covers does it keep the transmission clean stock it seems this truck gets a lot of dirt and rocks in the trans gears.
it would actually be really cool to see a running video in some sand and loose dirt and really tear it up then take off your covers at the end and see how it looks. I'm trying to resolve how it looks in this vid and he talks about it at 7:33 ua-cam.com/video/isJ0EDC4QeE/v-deo.html
Just got the same setup.
May i ask your tune in ota.
Gearing you ended up with and temp/speed with it.
Hello 🖐 I recently bought a max8 g2 4278 2250kv combo, and in my combo there are no additional cables to solder on another motor, and the color of the thermal sheaths at the ends of the wires already soldered on the motor they are blue young orange not black like yours, Do you have any idea why it's like this in my house? Or if it's normal? 🤔 Thank you in anticipation! 🖐
Awesome
I know it's a little small but I'm really curious how that g2 max8 and 2250kv sensored motor would be in your Udr? I know you have the big block but I'd think you would get a ton of views
Not sure but I just put it back in the Sledge
@@ExocagedRC Cool, yep, that system is about perfect for the sledge. Well thank you for the reply. And I'll definitely continue watching
Forgive me Exo, but isn't 51.5 a little slow even though its running a 2250kv motor? Thats a 60mph truck out of the box no?
I had the same question. Mine does 49 mph or so out of the box on stock pinion. For the cost of the swap I’d want more than a couple mph.
Grass field? On 4S? On 6S it’s way way faster.
@@ExocagedRC But I mean considering the truck comes stock with a 4s system and RTR does 50 on short grass already. It's a 60mph truck stock out of the box, 45-50 isn't hard on short grass like this right? And if you put 6s on this motor, you would have smoked it considering it was at 160 already on 4s
@@codejunki567 It's not a 60mph truck stock out of the box, you have to install optional 25/46 gearing and that's on a 2400kv motor 60mph on the street only. Don't forget Exocaged RC has the heaviest vitavon upgrades on his truck. The front and rear bulkheads are at least a few pounds of added weight, plus the other aluminum parts he has on it. He's running 24/46 with a 2250KV motor, he would probably pick up a few mph on the street so you would probably be looking at 55mph on the street. If he geared up his pinion one more tooth to the suggested Traxxas speed gearing 25/46 he would be within a few mph of 60mph. Who wants to run a monster truck with a speed setup and run it on the street only or overheat their motor/esc? 51.5mph on dirt and grass is plenty fast enough..
@@FlailinMonkey I strictly bash my K6S, both bulkheads are Hot Racing aluminum, with the speed setup and have absolutely no issues. I can take it to a large parking lot and hit 73 mph, and also take it to the park and run back to back full speed grass runs with no issues.
How did u fix the ESC to the car!? Did you use the kit biadhesive inside the box?
I wonder how the 2500kv 4268 motor would do in the max if you gear it down!
Excuse me sir, how did you mount the esc? I’ve just ordered max8 2200 not g2 for my maxx, just wondering how you fitted yours thanks
You've had trouble keeping motors cool because of all that extra weight! Only upgrades for Maxx are front knuckles an metal spur
What's a good upgrade for a scx6 that is not a black jacket?! Max4?
The castle monster X 8s and the 1260kv motor
how has the system held up? i want to get this system but not sure to go for the max8 or the g2 because i’ve seen some peoples g2 catch fire
Can you use the factory heat sink and fan with that motor?
The factory heatsink is for a smaller diameter motor
@@ExocagedRC Yeah, I saw the hobbywing motor is 6mm on diameter larger than the factory motor. I'm wondering if I can just force it on and it will bend some but will work? 🤔 Thanks for the response!
Are you running 4s or 6s batteries in this set up ?
Hey, just thinking about a new combo for my Maxx (Max 8 G2 or Max6). Which one would u recommend? Greetings from Austria
Kauf Dir den Max8 Regler (nicht G2) und belasse es bei den original Motor. Reicht meiner Meinung nach für den Maxx völlig aus.
Grüsse!
4s?
Do you think upgrading it to V2 was worth it?
yes
awesome run I wonder how that new 2500kv hobby wing would run in this ? I can't decide weather to get this system or this with the 2500kv 4268 G2.
If you run that motor let me know , I've heard it gets hot.
@@John_D2 I tried it and it was ok. I had the sledge stock system in there a while back and I think I liked it better.
@@jacobhenson3952 right on. i have the max 8 combo , i'm just gonna order some 6s batteries.
@@John_D2 yea I was going to try that before I took it out and I forgot to.
Good morning youtube land
Hey Joe, how does your Maxx weigh? I'm just curious because I can't find anything from hobbywing on a weight limits.
Y not put the maxx4 in the xmaxx with 12s
Too heavy n too low of kV
Probably won't fit
It can be made to fit but I’d run an 800kv on it if I did. The esc is huge, like twice as big as an XLX2
Is that on 4s or 6s?
4s
How did you mount the esc?
I just glued it in place
@@ExocagedRCoh nice! Seemed to work well
Do you Run the Car in the vid on 4s?
Yes 4s
U runnin 4or6$???
4
2
😁1