The BEST Loaded Subwoofer Box on Amazon!
Вставка
- Опубліковано 9 гру 2023
- Get the box here*:amzn.to/3ReFY4n
Amp: amzn.to/3GCWwOK
Wire Kit: lddy.no/1irlx
Stinger amp dyno: • The best budget subwoo...
More pre fab boxes: • Amp Dynos
Join this channel to get access to elusive membership perks:
/ @diyaudioguy
Is this the best loaded subwoofer box on Amazon? Is it better than skar? Heck yes it is! Don't sleep on this budget, entry level setup for beginners!
If you found this video helpful then you can support the channel on Patreon for as little as $3 a month: / diyaudioguy
Exclusive Discount Codes for DIY Audio Guy fans:
7% off of Savard (www.savardspeakersystems.com/...) with the code DIYAUDIO
10% off at NVX.com (nvx.com/?ref=n_3Nr6MdZIar-d) with the code DIYAUDIO10
10% off of Custom Speaker Pods (customspeakerpods.com/) with the code DIYAG
5% off from Battery Hookup (batteryhookup.com) with the code DIYAudio
5% off at Parts Express (parts-express.sjv.io/3PGnNr) with the Code DIY5
10% off at Jag35 (jag35.com/DIYaudio) with the code DIYAUDIO
Check out the DIY Auido Guy Amazon Store:
Amazon: www.amazon.com/shop/diyaudioguy
Support DIY audio content by shopping with these affiliates:
Shop for Car Audio at NVX: nvx.com/?ref=n_3Nr6MdZIar-d
Shop for Basshead Gear at Down4Sound: lddy.no/1065t
Shop for Car and Home Audio at Crutchfield: howl.me/cg9bCOKLoK7
Shop for Car Audio at Sonic Electronix: bit.ly/3bazPBs
Shop for whole-house auido at Arylic: www.arylic.com?aff=79
DIY Audio Merch: my-store-b3f136.creator-sprin...
Funny Car Audio T-Shirts: maxxpoweraudio.com
Connect on social media:
Facebook: / diy-audio-guy-11142806...
Instagram: / diyaudioguy
Twitter: / diyaudioguy1
Chapters:
0:00 Introduction
Music By creatormix.com
*As an associate/affiliate marketer I may earn a small commission on qualified purchases on Amazon, Crutchfield, Parts Express, Sonic Electronix, NVX, customspeakerpods.com, Arylic, Savard or Down4Sound.
#affiliatte #crutchfieldpartner - Авто та транспорт
Get the box here*:amzn.to/3ReFY4n
*affiliate link
They have a dual loaded enclosure for only $100 more. 269. Can you do a demo on one of them with say a tarramps 3000?
Do you have a link to the single sub box in the video? The one at the link has two subs.
@@EricWebSurfer sometimes Amazon will swap the link on me. Nothing I can do about it.
🎉 hi
@@DIYAudioGuy
That setup is on a whole other level for under $300!! Excellent review and I see you almost at 80k!
700 watt system for under 300? I don't think you're going to beat that.
Been growing at a steady pace. Should have that silver play button by this time next year.
I must say 2 thumbs up.. This type of content is what i see on TV. Great Job..
Thanks for watching.
The whole combo is perfect for my daughter. I just gave her one my older vehicles (2012 Cruze) which is perfect for school and a lil bump but not too bad to bother others. I’m loving the construction details.
Thanks for the inside photos; I really liked seeing the mounting gasket.
I really like that inside bracing, that blew my mind. Hands down, looks well built in all ways. I do agree, that second baffle would be an awesome touch! Great video!!
In my opinion, a second baffle would be a downgrade. It wouldn't do anything at all to stiffen the baffle, yet it would add weight and expense. If you're using threaded screws and t-nuts then there's no actual need for a second baffle.
The feet are a brilliant move Stigner. Brilliant.
Right, a tiny little detail that makes a huge deference at little cost to implement. Kenwood does something similar, but this is cheaper.
After a ton of research, I ordered this sub and amp. After installation, I was absolutely blown away by the performance of this setup. Got very loud and quallity seamed very good for the price. After about 2 weeks I was noticing the driver getting a bit quieter. I thought maybe I was just getting used to the bass level. But by week 3, listening to country music, believe it or not, the driver froze up completely. I was very shocked, to say the least. I have never had the gain higher than 50% and ran the bass nob to the front of the car and was set right around 1/4 on. I called Stinger, and they told me to send it back through Amazon for a refund. I told them that I liked the enclosure, and I just wanted to swap it out. They told me that they would only give me a refund. Im a little disappointed because with the way it was built, thought I would get many years of life out of it. I will keep you all posted with the conclusion of this return. But maybe I should take the money and order a Skar like I originally planned.
Sorry to hear that. Next time give this a watch when you set up the subwoofer: ua-cam.com/video/MBcGOoRJ4Ro/v-deo.htmlsi=DGmMYzHsDjackWfr
did not expect that kind if attention to detail on a pre fab enclosure. Stinger definitely stepping up their game
That enclosure is pretty impressive the way it has the bracing for the motor makes the sub and enclosure a one piece fusing the sub and enclosure making everything stronger and more ridged making for less box flex meaning more output im 100 % impressed by stinger on this job well done..
Just what I need for my Cadillac xt5 simple and clean
After going through over a dozen different subwoofers.. from Covid til now.. I finally settles on 2 10 type Rs in a JL HO Box.. INSANELY loud and still sound Good. I did take 1 look at these new Stinger Subs/Enclosures and Knew they would be Awesome. Their unloaded enclosures are impressive as well.
That’s a crazy box wow magnet support center braced prefab box!!!! Sick go stinger!!!❤
man stinger is really bringing it to the budget setup game. good stuff.
My memphis mojo's prefab has internal bracing like aswell as double baffle and 45 corners. Tuned to 35 hz with aeroport. Box weights 53lbs empty for just 2 6.5 inch subwoofers.
That bracing is also on skar evl loaded enclosures which are different than the empty and sdr loaded enclosures
I have a 10inch stinger sub hooked up to a stinger 1000.1 amp and it sounds awesome
MTX had motor supports in their prefab boxes made for the 9500 and 8500 series. But this is impressive for a stamped basket sub.
internal bracing! wow... love it!
The Skar EVL prefab has the same kind of bracing. First time I took one out I thought it was also screwed in from the back of something.
They hit it out the park with that one. Impressive
I told u this back when I seen your hyanka vid. I have one with the thousand watt amp is perfect with it. Than I bought two thousands and linked them together boy she really pounds sounds great gotta be careful now not to bottom it out. But I have never smelled it. I have a bigger veter sub now but used that with the wrapped amps for over a month.
Best show yet and glad to here the ol brands still going strong
Hopefully we are seeing the start of better prefab boxes hitting the market. This is the way to build one. I for one am looking forward to what Stinger has planned for the future.
Very nice review and demo Justin. 👍👍
Thanks for watching.
Looks similar in quality to the Audio Legion 12 I started out with 4 years ago. I paid around $150 for a 12" sub in a nice ported box with about 1.75 cubic feet of air space off ebay when Skar was selling off the Audio Legion stuff. It could only handle about 600w rms so I upgraded after a year.
Man, Justin you’re killing it thank you for the great content. This is right up my alley to put in my nieces vehicle. She is a young college student and wants something simple to put in and out perfect.
This is perfect for that!
Put my SKAR 12s on marketplace today, gonna see how these do in place of the two SKAR VXFs I’m pushing with the OrionHCCAsplx 3K. Excited😊
Been debating on returning the used attend box I got from Amazon and getting one of these
Love the video , very informative
Had no idea stinger had a sub and enclosure. They definitely make good quality audio equipment. Thier rca's are outstanding
Yep, been making good stuff for a few decades now.
Earlier this summer there was a little confusion on Amazon with the pricing. I picked up a 12" DC model for the price of the lower model in your video. I've picked up their 700, 1,000, and 1,500 watt amplifiers and their 10" and 12" loaded enclosures this year, before the chaos cleared. Systems for all three of my vehicles for under a thousand dollars!
I like that box and Subbed cuz you have great content
Great video....I'm based in the UK and wanted to buy this and pair it with the mt1000.1 amp but I can't get the sub box here...only the amp. Grrrr!
I have the skar tube , it does 20hz
The magnet bracing comes on the skar evl prefab also. They added them cuz the magnet was snapping off the basket during shipping. Happend to kspace guy in his video. Idk if you've ever seen that enclosure or not? I've got it in one of my other vehicles. It's a really nice box for Skar too🤷♂️
I have not seen that enclosure.
Insane value 😮
I'm buying the Stinger combo that comes with the 12 inch subwoofer, same box as in the video, Stinger 1000 watt amp, and their 4 gauge wiring kit for $329.00 this Friday. Thanks for the video...I made a box a several years back for (2) Power Bass 10s sealed with internal bracing similar to that but it didn't actually support the magnet...I'm putting this Stinger combo into a 2023 Mitsubishi Outlander Sport GT...Hoping it's gonna be a banger!!!
How it bumps ?
Def. A good, reliable, quality brand.( I still believe these subs/amps were part of the phoenix gold series,& they just put their logo on them since pg wont be sold in the usa anymore. Makes sense to not loose inventory imo. I bought the mt 1000.1 with a coupon, delivered for $108! Still going to use my D’amore mono block👍🏼👍🏼👍🏼)
Right, and at the same time audio control started selling subwoofers. What are the odds that two AAMP brands starting making more product when Phoenix Gold was phased out of the US market?
I don't care if they were Phoenix Gold, Audiocontrol, or or anything else. They're Stinger now, and they're good stuff. I feel the prices may go up a little bit, now that the word has gotten out on the quality and craftsmanship for the price.
oh wow neat design cab, great video
That is what I thought. Kicking it up a notch.
hell yeah... love seeing you here.. also love your videos
I paid $1,000 for a kicker amp few years back. Been using it and have been blown away with the performance. It completely runs almost double the advertised power.
Kicker kxa 2400.1 (2400$2ohm)
I was running 2 skar evl 12 at 1 ohm I think they handle about 1250rms each, just blew one of my skars. This amp must be making like 3500watts
Going to change to dual evl 15s or possibly three 12s
Nice test, and 169 is a steal.
I KNOW!
34hz is quite good!
Yeah good sounding sub. Definitely need to keep in mind with the price. I like Stinger products. Overall quality is good to better throughout everything they sell. It's crazy some of Stinger's prices, because I don't see Stinger as a "budget" brand. I'd say probably some of the best loaded subwoofers boxes out there since they use 3/4 inch MDF.
Totally agree
nice test.
i would venture to say that the downfiring position is going to offer the smoother response of the 2 options. no one really wants a huge bump at 50hz anyways.
Yes, the response was a little flatter. I wonder if it would be different in a car trunk.
They've really put some effort into this one
Yes
I would like to see what you think of the DC audio m3 8 subwoofer.
I have no experience with it.
Stinger is seriously mounting an offense on the industry. First the amps, now sub boxes and subs.
Yes.
i agree. true daily driver gear, at a great price and performance.
No it isn't lol... They have like 3 amplifiers, biggest one being 1000w and it's chinese crap. They have 1 subwoofer which is decent, cheap basket, chinese coils, single tiny tinsel lead. The box is decent but that brace in the center is 100% pointless and if anything will make the sub sound worse.
@@jesselusky2074 okay 🤣🤣😩😩
@@jesselusky2074 I just noticed that’s actually monoblock. They also have a whole series of two channel and four channel amps as well. Looks to me like someone doesn’t know their amps very well. 😂
Skar does the sub internal bracing on the EVL series prefabs
Cool
I just ordered this based on your review.
I hope you like it.
Great video thank you
Glad you enjoyed it
@@DIYAudioGuy do they make these in 10”?
@@michaelyoung7911 yes
Those Stinger products are a pretty good value
Crushing it.
Damn Stinger, you scary (good value).
Someone needs to review the 10inch
When doing the frequency test on the sub, was it me? Or did 35 Hz sound lower in pitch than 30 Hz? Maybe it's just my crappy stereo (which is a bit older but not so crappy). lol
Philips head screws are supposed to cam out by design and they're often used when we should be using square/hex/star pattern. Those give us no cam-out torque and thus less likely to strip. It's $1 more to use good screws. We should start making this part of our quality assessments.
Yep
It's like any other product, they don't want you to take it apart. If you do take the sub out of the box it probably voids the warranty.
@@JasonWW2000 Thankfully that's not legal now. Sadly, it's unenforceable.
There Amps are no joke! I got the 700.1 and been playing it at 2ohms and now 1ohm. It's rated at 700rms but I think it's pushing 1000w because it makes my 1000w max sub start to smell like it's burning at full volume
No doubt the thing can generate a thousand Watts on a subwoofer. ua-cam.com/video/gwp4_AyLjK0/v-deo.htmlsi=fcgikdulYu3ApHT1
Just make sure you're not clipping, if you are you will destroy the sub.
hey thank you so much for the video been looking for an entry level option im most likely going with this stinger kit however im pretty new to vehicle audio would i be able to just use the settings from this video?or will my application be different even though its the same equipment? Thanks again for the content brother
Glad this was helpful, not really sure which settings you are talking about. I don't recall tinkering with any settings when I filmed this video.
@@DIYAudioGuy Thanks for the reply I was more so talking about the gain and crossover andsuch on the amp I may sound dumb as I'm not too well versed in this subject yet
@@bluntkushman9660 the only way to learn is to ask questions. So yes all of the game and crossover settings are going to be a function of what you're doing in your own car.
Stinger first got my attention with their Android head units.. Now I'll have to go down the speaker rabbit hole.
When they first came out you could get the DC2 (1000 rms) loaded with a MT1500 for $269. It sounded great but it was lacking on the lows. You could tell the box was too small for that specific sub. I think the box is the same as the one in the video.
More like it was 220 :(((
@@onesikm3 That's what I thought but it seemed too low. I bought 2 sets sold both the subs made money and kept the free amps.
Same! I also grabbed the 10" and the 1,000. And the one in this video, with the 700. I got three subs, in enclosures, three amplifiers, and three Stinger installation kits for just under a thousand dollars. Taxes and everything. Now all three of my vehicles are bumping.
If stinger gets there car audio head units better priced they would sell tons of them
You should give the stuff you buy away to your patrons VIA drawing when your finished testing. Seems like a good idea for EVERYONE
I would rather he sell it to help recoup some of his expenses.
How good would that sound with a home Theater set up
Typically you'd want a home theater sub to be tuned lower.
It must be subwoofer Sunday!
Every Sunday is Subwoofer Sunday!
How many cu ft is it
I like it
It is a great box, and really cheap for what you get.
After seeing your videos I don't feel so bad about getting back in to car audio after 20 years i thought it was a young man game (not calling you old) 😂 but all the UA-camrs are like my nephew age..
My median viewer age is close to 40.
@@DIYAudioGuy that's cool man I feel at home on your page strolling through the comments most are mature respectful ect..
So would you say upgrading the woofer in the future might prove to be difficult task if the magnet was framed that tight ?
Yes. I would say that.
I’d probably try that over a similarly priced Sundown or similarly over marketed subs. SKAR needs to step up their game and start sponsoring some social media influencers. Every new product is pushed as “better than Skar”, can’t remember a video of “Power Acoustik killer”, “Better than a Kicker?” Or the obvious, anything sold at DFS..😂
It is a good box.
What do you think will sound better on my tundra Crewmax. 2 10in subs or 3 or 4 6.5in subs?
That will depend on your available airspace.
@@DIYAudioGuy I have two 10in swallow subs now. I was thinking the 6.5 would sound better than a shallow.
Wish there was a smaller 6 or 8 inch version. I need a smaller option. 6 or 6.5 preferred
Give this a look, they have a smaller version. ua-cam.com/video/-s78YDDwB0I/v-deo.htmlsi=CH2DXfVaQz0-l0EI
Skar 🔈 EVL PRE FAB SUB BOX GOT THAT BRACING ON THE MAGNET 🧲
Good to know.
Next time you test a sub in the truck Justin fire it to the side of the truck (at a rear passenger door ) for best spl almost every truck I’ve tested gets loudest doing this just an idea😎👍 5:21
I could probably make an entire video on that! This sub might make a good test subject since I can can point it 6 deferent directions.
@@DIYAudioGuy would love to see it! Still got my message pending on FB btw
You should do a 300 dollar round up. And a 500 dollar roundup. If this was 300 and better than my JL audio 500 dollar setup. Imma cry.
The impedance curve around Fb suggests that the box is a bit "lossy" (the minimum impedance at the is higher than I'd expect). Was there any stuffing inside the box?
LOL - i should have watched the video a bit further before posting that message... 🙂
Can you clarify what you mean by lossy?
@@DIYAudioGuy Box losses, caused by absorbent material in the box, or leaks. The result is less output around Fb, the resonance frequency. Normally referred to in Ql. Some box modelling programs allow you to adjust it, and most assume a value of 7 for Ql (the higher the Ql, the lower the box losses).
The value of the impedance minimum at Fb compared to Re can give a good idea of the extent of the box losses. The larger the value of this ratio, the higher the box losses.
how is this compared to sundown box from down4sound.
I think the preloaded sundown box from down for sound is a much better setup. But it's also a lot more expensive.
At this exact moment it is on sale, so it's only about 50 bucks more. At that price point I would go with the down for sound enclosure.
Stainless steel is soft ( screws ) easy to damage
nice!
Thanks for the visit
Do they have a website for their products?
I believe I ordered the mt1000.1 amp from 'Stinger offroad'. They even sale the ac products there too.
When you start getting into DSP, anything can be flat!
True
Looks alot like the audio control subs recently released
They are owned by the same company.
Looks like they both have a cast frame.
Very smart about audio. But "locking" pliers 😂😂😂😂
Would you prefer that I call them generic vise grips?
This or the Skar tube?
This
This or a Skar sdr or evl box???
This
This stinger box or the down4sound/sundown e12
At the current sale price go with the down 4 sound box.
thanks yep, caught the sundown e12/down4sound box for 199.99 @@DIYAudioGuy
Don't they have L7 kicker preloaded boxes on Amazon?? Are they skipped over because they're not considered "budget"
amzn.to/3Tpc68n
Amp loaded box and all under 300! Wow
It is a great deal.
Audio Control uses the same sub.
Is it the exact same subwoofer?
The link you have given is to a skar 8 inch box
Odd, I will see if I can fix that
@@DIYAudioGuy I think it might be Amazon's geographic changing it as Im in the UK. The link to the amp is also a SKAR amp.
The link is working for me here in the states.
Wait, what, no t/s param measurement of the subwoofer driver?
That information is not relevant for people who buy preloaded enclosures.
@@DIYAudioGuy It could give an idea of what went into the alignment (box size and tuning) they chose for the driver
Is this the best deal for a 12inch box? I was looking at skar...
$370 bucks for the new one with amp is it worth it anymore?
Looks like the price bumped up a bit, I think it is still a goo deal.
People at audio control busy coming up with new products also also at stinger
Yep, both owned by AAMP, they are making some big moves.
So much low end not being heard with 30-40hz tuning... SQ is hearing/feeling the lowest of lows to the highest of highs and everything in between...
This box and sub is actually pretty damn clean looking! 🔊🧼
I was pleasantly surprised.
I hated the way mine sounded it it sounded so much better in a bigger box
Most subs do sound better in a bigger box.
But how long does it last??? That's the biggest problem. My friend got his first sub and he was like dude I got this shit for 50 bucks and sounded crazy. Hit the lows great I said bet I'll come hear it. It was a boss sub.... yea it was cheap and ACTUALLY sounded ok but then two months later he was like awman it blew... I was like duh hahahaha it was a 50 dollar sub. Meanwhile I've spent 400 on my sub and I've had it for 3 years. I feel in audio you get what you pay for. Good box. Good cone. Seems to look pretty sturdy but the voice coil is probably trash. Idk I wouldn't trust it. I like my stuff to get broken in and be able to take a beating.
The link is for two subs, not one though
Sometimes Amazon will redirect to a similar item if the item at the original link is unavailable.
@@DIYAudioGuy yea thats what i was thinking. Theyre out, so they did that.
That's not stitching on the logo......it's some sort of vinyl or cured spray paint.
I saw your comment and ran out to the garage to double check. It is stitched.
This subwoofer system had very bad ratings on two other channels
Moist