AWT Applied Weapons Technologies Spyderco Manix 2 Scale Install and Other Modifications.
Вставка
- Опубліковано 21 січ 2023
- Spyderco Manix 2
amzn.to/3GV1PZv
Applied Weapons Technology Scales
appliedweaponstech.com/produc...
Ripps Garage Tech Clip
rippsgaragetech.com/collectio...
Flytanium Cage
www.flytanium.com/products/sp...
3/16" Ceramic Ball
amzn.to/3kzOcHN
Email
BladesAndEDC@gmail.com
Affiliates
Original Goat (Code BEDC for 15% off)
originalgoat.com/?ref=BEDC
Urban EDC Supply Affiliate
bit.ly/3DcgJtJ
Amazon Affiliate
amzn.to/3zfYv7x
White Mountain Knives 10% Off Code: BEDC10
whitemountainknives.com
Blue Creek Knives 10% Off Code: BEDC10
bluecreekknives.com/bladesandedc
Olight Store 10% OFF Code : BEDC10
www.olightstore.com/s/RKQK1D
Recommended For Knife Maintenance
Silicone Work Mat With Magnets
amzn.to/3J2O0cj
Pro Shot Products Zero Friction Knife Lubrication
amzn.to/37OeEaN
KPL Heavy
amzn.to/3zPTELS
Cotton Swabs AKA Doo Dads
amzn.to/3Klkr4I
Sabitoru Rust Remover
amzn.to/3BCnCEv
Bitster Organizer- Flexible Bit and Fastener Organizer With Magnetic Tray by Boltster
amzn.to/3LvlvUV
Wiha Bits
amzn.to/3xovaIU
Wiha Driver
amzn.to/3KAL3iV
KME Sharpener
amzn.to/3FYReOc
Strop
amzn.to/3zu6wWp
DMT Diamond Stropping Compound
amzn.to/3cVHqbv
Work Sharp Guided Field Sharpener
amzn.to/3juRA2L
#EDC #Knives #KnifeCommunity #bestedc2022 #edccommunity #edccarry #edccommunity
#knifelife #edclifestyle #knifenut #knifeforlife #edcgearporn #knifeporn
#edcgear #pocketknives #pocketknife #pocketdump #everydaycarry #knife - Розваги
The screws on my Manix were really tight as well. So tight that I sheared the head off a cheap Amazon torx bit. I upgraded to the Wiha stubby driver and bits, and they got the screws out easily. What a difference good tools make.
The struggle bus is one that any knife guy has ridden. I appreciate you keeping it real and this video will save me some time and hassle when my AWT scales arrive soon. I just wipe down everything with mineral oil on a microfiber at the end of the day and I don't have any issues.
I'm glad you found it useful. Its actually a very easy install once you know what to do. I think this is the first AWT Manix 2 scale install video on UA-cam because I looked and couldn't find one. Once you know you don't need the lanyard tube it is very simple. Just take all the other screws out, remove the pivot, cage, washers, and the little spacer above the cage and it is a very simple build.
@@bladesandedc You're right nobody else has done one which is how I found yours. I'll take you up on the offer of a ceramic ball, happy to send you a SASE.
Great colour combo and that pocket clip really makes it! Thanks for doing this video and not editing out some of the difficulties you had. I've got a Manix 2 on its way, my first Spyderco, so looking forward to it. This has given me some mod ideas!
YES!
I have thoroughly enjoyed this video, the screw ups, the aggravation when things don’t cooperate, and then the success. Sounds like a normal day in my household LOL!!!
Sick custom job! Those scales are awesome, and it looks like the overall thickness to the knifes profile was also slimmer down along with the weight.. great job!
I got RGT and AWT on a couple of knives myself. Both great suppliers! These scales are great, I suddenly see the appeal of the Manix 😊
These are the best scales available for the manix2, I have them for my 2 manix2's. I hope one day they make them for the xl version as well.
Love the color combos! Felt like an uphill battle the whole way, but I was right there with you brother!
Really liked the “ LEGO knife way “ ! Replacing parts , disassembly … it is awesome !
I really like your Spy 2 green !
I just got some AwT scales.. thanks for the walkthrough.. Its so light now
Knife looks great. Thanks for showing the build.
I'm really glad I found your video on this. From what I have heard the Manix 2 is one of the hardest knives to be doing a scale swap on. The spring in the cage lock likes to jump some distance when you unlock it from the cage. This will be the first scale swap I ever try so if it succeeds (gonna try over the weekend) I will be ready for any other scale swap! But I plan to use your video as a guide to see how it's done right!
You got it. It’s not that bad when you have done it once or if you have a video to reference while doing it.
The scale swap itself isn't too bad just make sure you watch out for the cage and best to do one side at a time… the tricky part is swapping the cage, oh and you have to pry the G10 and liner off that dang lanyard which can be difficult especially if you want to keep the g10 and liner in good condition
Thanks for the great video! Saved my ass on a manix scale swap. Look forward to more! Thanks again.
That's the best use of nebula carbon fiber I've seen so far.
Very helpful! I'll take one of your ceramic balls
It is the same size lanyard tube. I use a small wooden dowel with a slight taper to knock it out.
Wow I love the way the clip pops with the scales and button! Looks fantastic brother
Thanks for watching. I really like the way it looks, but I like the way it feels in hand and the action even more after these mods. I think the Para 3 has become my 2nd favorite Spyderco.
Sweet transformation. The manix 2 is my favorite of the Spyderco's
Great choices for mods!
Great video. Just got mine today. I appreciate the tutorial. I’m pretty much the same way when I put my knives together. About the ceramic ball I’ll take one:)
Thanks Jose. DM me your address on instagram or email me with is and I will send you a ceramic bearing. bladesandedc@gmail.com
Just got my manix 2 a couple days ago and I'm loving it. It's actually better than I was expecting and that's saying something. Im looking forward to customising it myself in the near future, gonna go for a different colour every part, the jokers manix 😂😂
Looks like an absolutely amazing setup.
Man that Manix looks so sweeet!!!! Great job 👏 and the giggle was even better
Thank you!! 😁
I love your confidence just went for it , I have been watching video's on Replacing my ball cage ,and you were the first to use the tube Tool i have one also but that tube was nothing like my other spyderco's I like The new look , Now I will order scales , i already bought everything but scales .
Knife looks very nice. I'm looking at the Manix XL for sure. But overall very nice updates.
Hey there! I recently got a Manix 2 15V, & I just ordered these exact AWT scales in this color yesterday! I saved some money by ordering blems, & those were the only type in which they had blue available. And from what I've seen, the blems don't seem too bad, & I saved $15. I already have a brass cage & short MXG clip that I'm planning on switching over, but I think it'd be really cool to have a ceramic ball to go with this setup.
If you have any of these bearings left & you're willing to send, I'd LOVE to have one!
And thanks so much for posting this assembly video. I likely would've had the same issue at first trying to figure out that barrel spacer. And I didn't know the lanyard tube isn't needed for these scales. There are several things about this video that I'm sure will save me time vs. me trying to figure everything out as I go. I'm used to disassembling knives, but even so, there's aspects of this particular assembly that aren't crystal clear initially.
I thought I had already subbed to you & noticed just now that I wasn't, so I fixed that! Subbed! :o)
Thank you for the kind words. I looked on youtube for a AWT Manix install and couldn't find one so it makes me feel good that this one helped you and I hope it helps others, because the AWT scale install with the liner delete completely changes this knife for the better. Email me your address at BladesandEDC@gmail.com and I will send you a ceramic bearing.
epic ! turned out great
I really dig the PM2 clip on that Mannix. I've got the Universal on one of mine but the curve of the Pm2 clip and the pattern of the CF, the colors you chose with the cage and all is very cool. I would have not made any of those decisions but you did n it's fn awesome.
Man you weren't kidding about these scales! I got the purple ano! They just are beautiful and premium. Only issue I'm afraid of is damn scratches but that's with any, especially aluminum. Definitely won't be my work user. Thanks for the help! 👍
Awesome build the red ball cage is what makes it pop
Thank you.
Start with the D shaped side of the pivot. Put the pivot in the D shaped side first, put the back spacer on that side. Rear screw first wiggle the ball cage in and use your thumb to push the top of the back spacer down, which holds the BC in place, pull and the BC back and wiggle the blade on, then when it’s on, use your thumb to push down the back spacer. Carefully shut the blade. Put the top screw in the back spacer on the D shaped side. Show side. You have to shut the blade. The back spacer won’t line up open. Blade on hold the back spacer with your thumb, carefully shut the blade, top screw on that side. Then other side and you’re done. Washer, scale and rear stand off, pocket clip. Done. Worth every penny.
Just got a manix 2 thanks for therun thru on how 2 upgrade it
Your Spyderco collection is fantastic. That Manix 2 is beautiful! 🕸️🕷️
Manix 2, and para 2 are my favorite spydies, followed by the Endura and native 5. Got the magnacut manix 2 lightweight on pre order I'm going to poach the blade off of for a build with some original goat scales, and some AWT scales on the way for my other manix 2. Really excited to make them both truly my own. Collection of para 2s next. Thanks for the video.
The captive pivot literally got us both at the identical time I had to totally disassemble my knife as well
this is extremely nice, quite eye catching.
I will say it Flytanium should have taken care of you my brother . I got you 👍🏻
Man this was painful to watch sometimes! but hopefully it helps others not make rookie mistakes.
AWT make the best scales on the market right now. Wasn’t a fan of them on my Para3 but they transformed my bugout.
Looking forward to getting a set for my Mainx II and their new release 940 scales
On your scale puller you should try putting a drop of oil between the scale and tube. Then tighten down the tool and wiggle the scale and tool. In a swinging motion not flexing apart.
Your setup is def one of the best looking I've seen thus far. I'm not the type to copy another man's setup intentionally, but this makes me wish I was. 😂
Go for it!
You have nice builds
Great video. Im about to do a custom paramilitary 2
I truly appreciate you for making this video. I was contemplating a scale swap on my Manix 2. Efff. That. Shit. My Manix 2 is fine just like it is! Respect. D
You do a damn good job!
Looks good
Super Sex, love the new look!
Honestly my murdered out manix is one of my 2 truly tactical knives for when you need to do the deed, so I might just go with the ceramic ball and aluminum scale upgrade, but keep it black!
Beautiful shanks bro!!
Fantastic work my friend! New subscriber here. Loved the commentary too!
Gosh, this video is so entertaining. I’m ova here rootin for ya out loud the entire time. By the half way mark I was also calling screws bitches and a bastards. The struggle was real and I felt it.
I literally talk to myself like this with each and every build and I’m not videoing for an audience. You’re for sure my spirit animal.
I took my Manix 2 apart last night to install new fasteners and ball cage. …… theeee most pain in the ass I’ve ever dealt with disassembling a knife. And woke up with a blister on my pinkie and thumb. 😂. I got it tho
The problem with the tube tool is that it's VERY sensitive to alignment. If it just locks, you need to re-align it until it's centered perfectly. But you figured that out.
EDCI solution to clean and protect blades works great
definitely learned what to avoid as I'm modifying the Manix. If you still have the ceramic ball, I'd like to buy it from you. Thanks for the video
Sorry those have been gone for a while now but here is a link to the correct size. They only come in a 5 pack, but they aren't expensive. amzn.to/3O68wwA
Really wish you could still use the lanyard tube.
The scales have holes in them so you can still attach a lanyard.
@@bladesandedc yeah but now I need to get another Manix for my aftermarket tubes lol
good looking knife
Not sure if anyone else makes these, but they look pretty good . Have a black coated blade on my pm3 so debating on black coated or stonewashed raw aluminum for contrast n durability of finish
Awesome build, a little late to the party but if you still have any ceramic ball bearings I could use one.
I'm glad other people have trouble sometimes, too. I make some boneheaded mistakes when I just assume I know how things go back together, instead of taking the time to figure it out before I start. But I wouldn't film it. I wonder if many reviewers make the same types of mistakes and just edit them out before posting... I just ordered a set of scales to replace the smooth G10 (heavy and no grip). I want to use the Cruwear blade, but this thing is just too heavy.
Thanks for the video. Looks great. New sub now. 👍🏼
Thank you!
@@bladesandedc you mentioned about your knife sales that members get early access. How do you become a member ?
Got any ceramic balls left?! Awesome build!
I really like how you present your videos. There is something to be said about you when you’re not afraid to show the mistakes. How do I get ahold of one of those ceramic balls & do they make a difference in opening? Cheers!
At least I am not the only one who curses at myself out loud while disabling and Reassembling knifes.
Yeah It’s A Really Nice Finished Product But Watching You R&R The Scales Was Painful To Say The Least … Hopefully I Can Do Mine With Far Less Struggle After Watching Your Struggles Thanks For The Video
Watched to the end... brother
We have the same disassembly mat.
Love your Vid and your colourful language. We live and learn to the day we die. Greetings from the UK 😂
I have the XL and just don't like the slickness of the aluminum on my Cruwear blade. Time to find some nice grippy XL scales.
Very nice, very very nice
Is this the xl version? Also BD1N steel or s110?
Thanks for the watch my man! I’ll take a ceramic ball if u still have one, thanks!
Sorry man they are all gone. Here is a link where you can buy them. You need to get the 3/16". amzn.to/3JhlR1C
@@bladesandedc no problem, thanks for the limk!!!
I feel your pain!! I went through the same shit the first time disassembling my Manix 2. Also, where did you get the CF scales for the Yojimbo? Those are sexy!!
T-9 developed by Boeing. Great for cleaning and leaves a protective waxy coating. Completely replaces WD40
Beautiful build man congrats. That thing is one sexy spyder. Im waiting on my m2 and titanium scales in the mail. Do you happen to have any links for some of those parts?
Thank you and all the parts are linked in the description of the video.
You got anymore of the ceramic balls , if so I'll take one
Those were gone long ago but here is a link to the correct size. They only come in 5 packs, but they aren't expensive. amzn.to/44A8jHx
@BladesAndEDC I got a quick question does the paramilitary 2 pocket clip work with the manix 2?
Rhar is the clip I used. It sticks out just a little past the scale so I had to sand it down a little. While installed on the scale I traced on the clip with a black pen and then laid a piece of 100 grit sand paper on a flat surface and rubbed the clip across it until i got to the line. It takes about 5 minutes to do it and fits like a glove.
Wd40 or Lucas Extreme Duty CLP to treat the blade.
I use CLP also.
How well does the clip function in and out of pocket? I love the looks of them, but I’ve had a lot of milled clips that are just a pain to get into the pocket. The original Spyderco clip and lynch clips slide right in with ease.
It works very well. It goes in and out of jeans perfectly.
@@bladesandedc awesome! Thank you so much for replying!!
Watching you suffer was hilarious 😂 super relatable.
I had a manix briefly, but sold it right away because I thought it was a fat pig of a knife. I've since seen some AWT builds, and i'm trying to snag a manix on the secondary again now, lol...
You will love the Manix 2 with AWT scales installed and the liners deleted. Its a completely different knife and so much better in hand and pocket with it being thinner and 30% lighter.
@BladesAndEDCyou wouldn't happen to have one of those ceramic balls left do you?
No sorry they are all gone.
@@bladesandedc thanks I figured that once I saw how old the video was... But thanks for all you do for the community.
That looked pretty hot up until the pocket clip. It was like one of those annoying artist collection ties based on abstract paintings.
Thank you for the video.
I wonder if these scales would work on Manix 2 Lightweight, since that knife has no liners in the first place. Getting the pinned plastic grip would probably be the hardest part, but after that, all the parts would be there.
I am not sure about that. With the para 3 LW they make a separate set of scales thats different from the normal para 3. They aren't currently selling any that say they are for the Manix 2 LW. Try to message them on Instagram and I'm sure they will let you know if they will work or not.
They won't. The backspacer are different. I bought a g10 s30v Manix 2 just to get the hardware to use my SPY27 blade from my Manix 2 LW with these.
Would these parts work with the lightweight? I have both the g10, and the lightweight, but I effing hate the frn scales and don't mind the heavy g10 version.
Unfortunatly no they won't, but I highly recommend doing the normal G10 version.
@@bladesandedc I might. It looks like a huge pain in the ass. Lol. Not needing the lanyard puller is a plus.
👍
1st! Have a great day everyone 😀
Servus !!!
Do you see any difference with the cage and the ceramic ball or does it feel more of a esthetics thing?
It lightens the weight and the ceramic gives it a great sound. The biggest improvement to the cage comes from the scales because you delete the liners and make the handle thinner which allows you to grip the cage much better. It will be the same with the OEM cage.
@@bladesandedc Great thanks for that info.
I'll take one of those ceramic balls iffn there is any left.
Sorry man those are long gone but here is a link to the correct size. They only come in 5 packs, but aren't expensive. amzn.to/3XGCL0m
Ok, thank you.
Still watching and I got your response
Lol you cussing was very mild compared to last Friday night when I took the winter blade co factor apart.. took 7 hours only to give up 3am . From midnight to 3 am Bryan winters was communicating with me trying to help me. Needless to say I said everything cuss word known to man atlest 20 times 🤣🤣 ended up sending the knife back to get the detent magnets glued back together and reassembled... Bryan has the best customer service!!!
Did you watch my Factor disassembly video?
@@bladesandedc yes but before he sent me the updated version for batch 2 there was only a disassembly video for batch 1. I almost had it back together but when I took apart all the magnets came together and when separating the the last 2 were glued together when trying to reglue the magnets flew together and squirted some glue out onto the liner I panicked and took liner off and must have bumped magnet and glue dried magnets weren't aligned and couldn't get liner back on and couldn't get magnets apart so I sent back on Saturday, he got Monday fixed and I got it from him Thursday so 5 days total
@@jpolhamus71 I didn't realize they changed the design from the original design. The magnets didn't come out with the original factor. It sounds like it was a nightmare. The magnets shouldn't come out when you disassemble.
@@bladesandedc Honestly if the 2 magnets didn't come unglued Which was my fault the only other problem I had was putting the magnets in backwards so they repelled instead of attract.. but now that I experienced taking it apart im confident I can take it apart and reassemble it... its just a learning curve. Plus Bryan winters is an awesome guy and had impeccable customer service!!
Thanks for the video! F the haters. I was just curious about the spring and if cutting it had any effect on lock integrity? Does it still lock out as strong as factory?
I'm definitely inspired.
Yea it still locks up solid. I only took 2 coils off the spring, but with the better access to the cage with the liner delete and AWT scales its hard to say if cutting the coils even made a difference.
you don’t still have any of those ceramic balls do you? i just got a Manix 2 and i’m planning to upgrade some of these same items in the near future
SOrry, but I gave tham all away already. Here is a link to the correct size for the manix 2. amzn.to/45J0HUB
@@bladesandedc i figured it was probably a long shot since the video is 4mo old. i appreciate it though! i’ll definitely order those! also great video and a very nice Manix 2 mod
did you have any trouble with the spring adjustment? cutting one coil off work out okay or did it need further adjustment later on?
Absolutely nothing wrong with the way you handled this. I'm about the same 😅
I made it to the end, so I guess I'm a legend whoot whoot 👍.
Oh yeah, because you're cool I'm also subscribing!
Edit: apparently I'm already subscribed to you 😆🤷✌️.
Really nice choices on the custom. I think the pocket clip is a lil busy tho. I see what you are going for, but I think a solid color clip(stonewash titanium, or dlc black)in another shade will make the red really pop
👍💯
You didn’t make the spring softer. You only shortened it. You need to stretch back out to the original length after you cut it, then it will be softer
Does the cage now have side to side slop, or is it the same as the G10 scales?
It feels just as sturdy as it did with the G10./ You just have better access to grab it because the knife is thinner with the liners gone.
@@bladesandedc Thanks, it looks phenomenal.🔥
Do you still have any of the ceramic balls or where I can find em
I don't have any more left, but here is a link to the correct size. They only come in 5 packs, but they aren't expensive. amzn.to/3PKHaxv
@@bladesandedc Awesome, thank you very much...keep up the great content
How much money did cost for parts minus the pocket clip ? Do you think that the parts will work on the maxamet lightweight ?
Unfortunately the scales will not work on a lightweight. The scales were $75, the cage was $26, and the ceramic ball was like $1.
@@bladesandedc I thought they changed the blade abit so you couldn't do it. Thanks
hmm, I thought all the manic 2 were BALL BEARINGS???? guess not? im done buying spyderco's with washers because of the sole problem of no matter how the pivot is adjusted, if you pinch the scales when closing it hangs up the blade.