Another great instructional video, My customer has a Sharp LED LCD TV LC-50Q7000U (2018) model basic smart tv with the same problem - cover pins 1thru 8 with electrical tape does the job every time 😎- language has no barrier in understanding electronic AC/DC principles 👍🏼 Thanks again my Brother from another Mother!
What are you talking about? There was no reaction from the TV when either side cable was unplugged bar a split white and black screen. How dishes assume the right hand connection was loading?
Think there is a short on the screen and this is blocking one side of that circuit, preventing the short from completing. Usually this takes trial and error blocking different sections of the ribbon cable to find the bad section.
Although ultimately the tv still has a short - and a potential fire risk but yes it works - I have a Hisense 50” doing the same but I’ll scrap it as I’ve ordered a new tv with 2.1 hdmi - but nice video m8
What the heck how the crap does that work? Why wouldn’t that part be covered from the factory on every TV. I’m no TV repair expert but this seems fishy.
It will work but not all the time. Also, there is no settings on factory mode to fix it because it is a hardware issue. And if there happens to be, you still cannot adjust it because the factory mode OSD won't pop up.
Should the left connector when connected have displayed a picture here? I cannot see any difference here between either cable removed. How did he know the right hand cable when inserted on its own was a problem?
Thanks. Please what are the characteristics that will help one to know that the problem is either due to a missing COF voltages or a short on CKV LINES?.
Why is there 8 clock signals? Can you explain how he knew it was the right side connection that was loading down the tcon board? With either cable connected on its own all that was displayed was a split white and black screen but most distortion or bars on either occasion.
What signals or voltage are you blocking. So by blocking certain signals/voltages as you show in this video, how does the panel continue to work then? Can someone point me to a video to explain this.
How come when you block that tracez the signal still comes through iver the whole oanel. When you taped the first tracez we saw partly signal. But when you arjusted the tape, it seems to be fixed. I wonder how its possible the signal still goes through the whole panel side, when part is blocked
Pershendetje zotri nje pyetje nqse me lejohet kur hoqe tenien e pare pame nga nje krahe e bardhe dhe tjetra e zeze dhe kur hoqe te dyten po e njejta gje por e kunderta ku kuptohet qe fain e kishte e dyta dhe ku mund te vendosesh tenien faleminderit
so did the trick with the tape,worked perfectly,however after about an hour the picture is overtaken by another picture,while its on in the background and then its on a loop every 30-45 seconds.any ideas???????????????????
Hello, do you have a good idea for how to remove a philips tvc screen that is glued. I just broke a Philips TV 50pus screen, it was very firmly glued and used a plastic card to free the glue. There was a corner very difficult. The result is the screen is broken. Do you have a really good idea for how to peel off a firmly glued TV screen without it being damaged. Many thanks for your help.
@@khalkhal2372 I guess these pins caused a short and error in tcon board. When covered they dont make contact with tcon board so no short (or fault) detected.
@@pascalphase2556 Well, it’s a common fix. Many video’s on this topic. It bypasses the clocksignal to the panel. But i’m not shure what causes the fault.
This apparently explains everything yeti cannot understand anything about this video. One would have thought that once he connected the cable on the right on its own that he would have got the distortion on that corresponding side of the screen no?
Guerreiro caso o amigo esteja querendo salva a TV de uso próprio e economizar SHOW, RECOMENDO, porém caso seja um técnico iniciante com pouca experiência e pegou aparelho de cliente, não tente, infelizmente em 95% casos o televisor apresentara defeitos em menos de uma semana.
I had the same problem with my toshiba 55L5550EE. I followed your advice, and the image reappears. But I have a single thick vertical white line on the right side of the screen. 8cm from the right edge of the screen. I ask for your help. Thanks a lot.
Another great instructional video, My customer has a Sharp LED LCD TV LC-50Q7000U
(2018) model basic smart tv with the same problem - cover pins 1thru 8 with electrical tape does the job every time 😎- language has no barrier in understanding electronic AC/DC principles 👍🏼
Thanks again my Brother from another Mother!
What are you talking about?
There was no reaction from the TV when either side cable was unplugged bar a split white and black screen. How dishes assume the right hand connection was loading?
This just worked for me. I didn't understand what you said but understood what you did. Thank you 🙏🏼
It’s works, it’s really works! you just need to cut the right pins.
I can't believe it, it works for me as well on an Phillips ambilight TV
Thanks you so much !
What is the logic behind this repair? How it is possible to fix the screen while blocking signals?
เรียนซ่อม อิเล็คทรอนิกสื แล้วจะรู้เอง มันเป็นการปิดกั้น vgh vga ฝั่งที่มันช๊อตกันไง
Thats what I would realy like to know
Think there is a short on the screen and this is blocking one side of that circuit, preventing the short from completing. Usually this takes trial and error blocking different sections of the ribbon cable to find the bad section.
Although ultimately the tv still has a short - and a potential fire risk but yes it works - I have a Hisense 50” doing the same but I’ll scrap it as I’ve ordered a new tv with 2.1 hdmi - but nice video m8
and not speaking English
Legend!😱💪🏼✨ Almost wanted to throw my tv away but this was the fix 🎉
How was this a fix?
What the heck how the crap does that work? Why wouldn’t that part be covered from the factory on every TV. I’m no TV repair expert but this seems fishy.
Cuss or don't try
It will work but not all the time.
Also, there is no settings on factory mode to fix it because it is a hardware issue. And if there happens to be, you still cannot adjust it because the factory mode OSD won't pop up.
Should the left connector when connected have displayed a picture here?
I cannot see any difference here between either cable removed.
How did he know the right hand cable when inserted on its own was a problem?
Can't believe my eyes. Fix my Akai 65 inch TV. Tv i almost threw away. Love u bro
Work is good,thanks for sharing sir,watching from the philippines..
I don t know how this sorcery works but it worked for me as well god bless
Thank you very much, sir, for the useful explanation. I have the same problem with my Philips 50 TV. Please help
Me too did it work for u?
My tv hisense smart tv got one line of horizontal line and one black line or vertical line it's gone be fixed
Great fix getting more common that fault is now I’m getting so many dead screens
Awesome video,i have repaired 3 tv`s in a short time with the same problems and others who had bad led strips.............
Good Job bruh ....i enjoy your work....???🥰
Thanks. Please what are the characteristics that will help one to know that the problem is either due to a missing COF voltages or a short on CKV LINES?.
How many lines should i cut... I have Omega 40inch is doing the same
Show as and tell us how many pins on the ribbon that u blocking the signal from t- con board...what are the signal u have blocking?
8 lines
@@chronikhavok3407 what signal he has blocked ?
CLK signals
Why is there 8 clock signals?
Can you explain how he knew it was the right side connection that was loading down the tcon board?
With either cable connected on its own all that was displayed was a split white and black screen but most distortion or bars on either occasion.
Thank you sir. Was able to fix my tv
just because the fuse is ok it does not mean the TCON is ok.
How did he know what side was shorting out?? I expected to see bars when he connected the right hand side on its own.
What signals or voltage are you blocking. So by blocking certain signals/voltages as you show in this video, how does the panel continue to work then? Can someone point me to a video to explain this.
How come when you block that tracez the signal still comes through iver the whole oanel. When you taped the first tracez we saw partly signal. But when you arjusted the tape, it seems to be fixed. I wonder how its possible the signal still goes through the whole panel side, when part is blocked
I want to know how many line on the flex you put tape on
how many pins you cover??
Ako vedel ze ma zblokovat tu cast a kolko pinov zablokovat ?
my TV also same problem will try and revert u sir
Hi all, What the port called at the bottom of the screen? It connect to the t con board and then run a ribbon across 4 different skinny boards
Agradeço pela dica, minha televisão voltou a funcionar
Fantastic it worked thank you! But i have some slightly visible lines how do I know with numbers of lines to cut. Thanks!
Grazie per il tuo prezioso video!
thanks sir very best video very best knowadge video hi
Pershendetje zotri nje pyetje nqse me lejohet kur hoqe tenien e pare pame nga nje krahe e bardhe dhe tjetra e zeze dhe kur hoqe te dyten po e njejta gje por e kunderta ku kuptohet qe fain e kishte e dyta dhe ku mund te vendosesh tenien faleminderit
I ke 2 lidhse majtas djathtas. Cilen e largoj nuk pat drit dmth zi
The language barrier made it difficult for me to understand how he goes about fixing the problem.. Anyway thank you.
Ek baar factory reset krke try kr lena kuch cases mai kaam kr jata hai
so did the trick with the tape,worked perfectly,however after about an hour the picture is overtaken by another picture,while its on in the background and then its on a loop every 30-45 seconds.any ideas???????????????????
try to cover more lines. if it doesn't work, try to cover less lines
My LG 24' IPS LED PC screen has the exact same problems like this tv
Can it be fixed ? And if If it can , Can I fix it by myself ?Thx !
You please make the writing clear because I following you
Have a Insignia 55df710na19 changed the led strips now have a line down the middle of the screen can you help !
You're a master!
Nice information sir 👍
Спасибо за ваши знания
I tried this but it didn't work for me
I need à help please. I have vertical liens on m'y tv (smart 32 pcs) screem.
When I folow you exemple my screem became black
Uhhhh I don't think I can watch TV again because my TV is a flat screen TV and it's huge
Merci sur un téléviseur j'ai déjà vu que cela avait été fait et maintenant la panne est revenu.que dois je pour revoir les images.❤❤❤❤
i dont know what you said but i understand
To this day, manufacturers haven't resolved those shitty lines on the screen
My tv same Hisense 55” shows white can this fix it too ?
Good work friend👋
What if I have this with picture? How do I repair?
I'm coming watching your video
Amazing review 👍👍👍
I wonder which language he does speak? And what is the explanation for the fix?
albanian
Hello, do you have a good idea for how to remove a philips tvc screen that is glued. I just broke a Philips TV 50pus screen, it was very firmly glued and used a plastic card to free the glue. There was a corner very difficult. The result is the screen is broken. Do you have a really good idea for how to peel off a firmly glued TV screen without it being damaged. Many thanks for your help.
Heatgun
Bravo shqipe
What don't you explain please ?
What is the explanation?
@BLACK NIGHT yes. But with the added tape, the pins don't make contact any more in the connector
@@khalkhal2372 I guess these pins caused a short and error in tcon board. When covered they dont make contact with tcon board so no short (or fault) detected.
@@Tsjoetenbille " I guess ?
@@pascalphase2556 Well, it’s a common fix. Many video’s on this topic. It bypasses the clocksignal to the panel. But i’m not shure what causes the fault.
Спасибо за ваши знания
good job mate.
Ma bravo i kod mene proradilo samo sam previše stavio trake pa malo jebe hdmi..ali bravo
How do I know what ribbon is causing the issue?
This apparently explains everything yeti cannot understand anything about this video.
One would have thought that once he connected the cable on the right on its own that he would have got the distortion on that corresponding side of the screen no?
Well done! Thanks.
Très bien 👍👍
Mine audio went off tried all but nothing works
Thanks 👍❤
Location mo boss?ganyan din ang sira ng tv qu
Malapit lang boss, russia
Does this method works for any tv?
if it is a defect for most TVs, yes
I did the same thing and it work but in one hour time,the tv went blank
What did you try?
This video makes no sense.
Excellent 👍👍
Really beautiful..
Beautiful in the fact it makes no sense?
Some like tv JVC smart tv 50 inch please help me
Boa 👏
Guerreiro caso o amigo esteja querendo salva a TV de uso próprio e economizar SHOW, RECOMENDO, porém caso seja um técnico iniciante com pouca experiência e pegou aparelho de cliente, não tente, infelizmente em 95% casos o televisor apresentara defeitos em menos de uma semana.
It works👌👌👌
wow !!! perfect
Beautiful
Hello my friend
thank you
Thank youuu❤❤
Good job!
BRAVO
Здравей, къде се загуби ? Хубави клипове и полезни правиш
Beautiful❤
Thanks very much
👍👍 16 👏👏
beautiful
Good job
THANK YOUU
cut ckv?
J’ai fait un mais c’est toujours la même chose
try to cover more lines or less below or above the ribbon
Plz unlock your subtitle.
I had the same problem with my toshiba 55L5550EE. I followed your advice, and the image reappears. But I have a single thick vertical white line on the right side of the screen. 8cm from the right edge of the screen. I ask for your help. Thanks a lot.
Have you tried covering up different areas and cables, could be a broken with the board as well, I'm not a technician.
I guess cover more or less of the ribbon???
Fool the technicians
Wanderful
Yes
Oh nice
Wery well.❤
Eccellente
amazing
Good
Thanks
nice
👍👍👍👍👍