There is an update for the firmware released about a month ago if you were not aware - easy peasy to update this controller, too. Not sure if you covered that in another video or not as I'm still going through your videos.
That's a Great Test Run for the Radiolink RC6GS.. I noticed that you are using the standard Firmware version but there is an Upgrade Firmware Available on the Radiolink website and very simple to install, Customer Service is Good also...✌️😎👍
My scx24 is 4 wheel steer, almost. Having servo direction issues. Can this be programmed to reverse direction for the rear servo? ... so as to have no need for a servo reverser?
Thanks for the info. Im debating whether to get the flysky gt3c or this one. Not sure how they compare, will have to watch some videos, I'm new to this.
Awesome! Thank you, I'll at some point need more channels. 5 extra channel hack sounds good to me. So far, this little beast is absolutely awesome. Im supposed to be moving onto 1/10 scale crawler, but I can't stop building Frankenbolt! Lol
Really helpful video. How did you setup the high/low transmission servo with this radio? I assume it's gonna be on channel 3, which is a 3 position switch.
It would be nice if it had a 3 position switch so you could setup the Transmission shifter for a neutral position (Free-wheel) so you could easily tow it in a "accident scenario".
Yes I agree, it’s missing a few things but has some nice features, I’m going to attempt to work with them to change a few things. If so, we will finally have an alternative to the hacked gt3c for capability.
@@ExocagedRC It sure looks nicer than the Traxxas TQi… I have been tempted to buy the DX5 Rugged but the lack of a six channel kills it for me. Hey have you tried to run the AXE 550 motor with the OG ESC already?
skirmich actually no sir I haven’t. I got this radio and a list of videos to make with it and trying it on a normal esc just got set back a bit. Sorry.
Nice review, thanks. 🙏👍🏻 I’m going to do a brushless conversion on a buggy so I don’t really need 6 channels but I might need them for something else some day. I guess for now I can add some LED lights to the buggy. I suppose I could blend the brake with a real LED for brake lights. Thanks again.
Thank you thank you thank you!Thank you thank you thank you!Thank you thank you thank you! Only thing I'd change is the VR dial. For me, it's reversed for how my mind works but now watching your video, I know I can change this and so much more. I didn't understand the dual rate, or even how to setup the diff locks. Great video!
@@ExocagedRC it was off actually... I put my buggy on top of a stand just to see far it will turn, at full lock i was having less. This was actually really cool tx, just need to sort this out
I am not good at English, but I always support your channel!^^
your english is better than many here in america.
Is the gt5 usable for trx4 with locking diffs and 2 speed?
Hi.. how do u fit in sport body without take off the inner lining?
Had to trim them way down to fit it
I also have one, good Radioink, good rc6gs!!!
This is so useful, thank you so much! Was contemplating using this radio for my Summit (bought it with AM setup), now I know it’ll work!
yeah its basically the same exact setup as the TRX4
There is an update for the firmware released about a month ago if you were not aware - easy peasy to update this controller, too. Not sure if you covered that in another video or not as I'm still going through your videos.
You can also store up to 10 different profiles for different vehicles.
good info,thanks Exccaged RC,this made me a good choice in Flysky and Radiolink, and obviously Radiolink's products are even better.
LOL.
That's a Great Test Run for the Radiolink RC6GS.. I noticed that you are using the standard Firmware version but there is an Upgrade Firmware Available on the Radiolink website and very simple to install, Customer Service is Good also...✌️😎👍
Larry H. RMX RC PLAYPARK yep I’ve done the update and will have a video on doing that as well as a drive using the new mixing with the RC mower.
Thanks your info,The new Firmware will support dual mixing, which will be perfectly controlled for dual motor models.
Does it have a cruise control function for the defender?
My scx24 is 4 wheel steer, almost. Having servo direction issues. Can this be programmed to reverse direction for the rear servo? ... so as to have no need for a servo reverser?
yes you can reverse the reverse servo, just go into the menu and reverse it. That should fix the issue
Thanks for the info.
Im debating whether to get the flysky gt3c or this one.
Not sure how they compare, will have to watch some videos, I'm new to this.
Mrs. Rabbit the 6gs is good so is the GT5. The hacked GT3c is also good and has more features than either of the two listed.
Awesome! Thank you, I'll at some point need more channels.
5 extra channel hack sounds good to me.
So far, this little beast is absolutely awesome.
Im supposed to be moving onto 1/10 scale crawler, but I can't stop building Frankenbolt! Lol
These radios r great for the price, I got one that was sent to review n I like it
Well so you can use a rc4gs 5 channel for a trx4
What fan size can fit into the aluminum motor mount?
Gyro on a crawler????????????
Great information, thanks for sharing
I also noticed you have some new fill! NICE! ~;+}>
John Underhill yes, we have begun building a scale park in my back yard, as we get things built you will see them in videos.
Wished I lived closer! ... Maybe I need a vacation?! ~;+}>
@@johnunderhill1270 if you can get over here come to the USTE in February, EPIC event!!
Really helpful video. How did you setup the high/low transmission servo with this radio? I assume it's gonna be on channel 3, which is a 3 position switch.
Yeah simple setup just get the endpoints right
It would be nice if it had a 3 position switch so you could setup the Transmission shifter for a neutral position (Free-wheel) so you could easily tow it in a "accident scenario".
Yes I agree, it’s missing a few things but has some nice features, I’m going to attempt to work with them to change a few things. If so, we will finally have an alternative to the hacked gt3c for capability.
@@ExocagedRC It sure looks nicer than the Traxxas TQi… I have been tempted to buy the DX5 Rugged but the lack of a six channel kills it for me.
Hey have you tried to run the AXE 550 motor with the OG ESC already?
skirmich actually no sir I haven’t. I got this radio and a list of videos to make with it and trying it on a normal esc just got set back a bit. Sorry.
I have this same transmitter and both of those toggle switches are 3 position.
Nice review, thanks. 🙏👍🏻 I’m going to do a brushless conversion on a buggy so I don’t really need 6 channels but I might need them for something else some day. I guess for now I can add some LED lights to the buggy. I suppose I could blend the brake with a real LED for brake lights.
Thanks again.
Hi Dude
Can you say to me if this r7fg can be compatible with E Revo2 ESC?
Should be fine. Just re calibrate the esc to the new radio
This Rc6gs is multifonction.
It must arrive
Thanks so!
Thank you thank you thank you!Thank you thank you thank you!Thank you thank you thank you!
Only thing I'd change is the VR dial. For me, it's reversed for how my mind works but now watching your video, I know I can change this and so much more. I didn't understand the dual rate, or even how to setup the diff locks. Great video!
Hi.
A I finking about buy that set but I don't need 6Ch I need 4Ch.Can U tell me how U set 2speed gearbox servo and what channel U ese in receiver?
How’s your steering angle ... I’ve tried on my buggy and my and I was having bigger turn angle compared to my original tx mt4
If the gyro is turned up, it tries to counter the steering you want. There is no way to set a priority with this like you can with a GT5
@@ExocagedRC it was off actually... I put my buggy on top of a stand just to see far it will turn, at full lock i was having less.
This was actually really cool tx, just need to sort this out
👍🏼
This model can't lock the rear diff only?
Wait !your servos still work? Mine died🤬 after 10 hours equal to 40 button pushes
LoL yeah I have 3 trx trucks and never had an issue with the stock Diff and Trans shift servos. I run them at 6v too.
Exocaged RC I bought there bec solution hoping to prevent the failure but...... hopefully a controller with end point adjustments is solution
1elaijah yeah I use the Hacked Flysky GT3c in most of my trucks, end points on all 8 channels and way more features than that. I also sell them.
Exocaged RC ❤️ awesome 😎 channel and store
If got winch what channel i use??
its a big piece of crap i bought one crappers
Thanks for review. 👍
Can sixth channel operate a winch? Maybe a how to video?
regno78 yeah you can use the toggle switches for a winch.
installing video please
Can this be used on the tamiya bruiser for the 3 spd trans
djr01974 yeah with the top toggles
Sooo... Is this gonna be your new radio? Or is this just a review? ~;+}>
John Underhill this will most likely be the radio of choice for the RC mowerand any tanks i build. It’s missing a momentary 3pos switch for winches.