I broke the white rigged end part of interior lock cable doing a door glass while pulling the door panel. I messed with to much, tried to JB weld it back, that doesn't work, ... I thought I'd give it a try, but I created a nightmare Anyhow, the door is in the locked position with the door panel on just like yours. My customer has to go through the passenger side of their car all week. I'll be doing this Friday. Man I'm stressin over this one big time. Glad I found this for hope. Thank Brother God bless!
Hey, help!! My 2007 honda civic were lacquered only the doors, and now the lacquered doors does not work, And to open with a key it does not work either that can be
During the speaker replacement I closed (the front right door ) and its locked so can not open. Should I remove the plastic part to unlock? Thank you so much.
So is not get open. With the unlock and lock button??? If not you maybe unplug something. Or pull the wires too much. And not. The. Door actuator is not working. And got stuck in the lock position.
Or. The metal rods. Got lose from the latch. But. You can do. Manual. Just remove the plastic. The. Take it look the rods. If they still attached to the actuator And. The door handle. And try to move them. Down. And see if you can get it unlock.
I solve the problem by changing my side mirror, then another problem pop up, thats when i closed the door and openning again, it wont open. Tell me if i slightly open the door panel on upper part, is it possible for me to pull and push the lock cable?
@@alejandromejorada what i did on mine is pull away the door panel with the door closed ( you need to pull very hard, watch for any bolt still screw on your panel) after you successfully remove the panel what you can see is all the rod that goes the door hatch, what mine did is the rod broke and there was no way to open the door from inside or outside. so after the panel is remove you legit, like literally need to broke the actuator (the plastic that cover the door hatch like in the video and then you get a screw driver and pull the metal hatch manually and your door will open
Thanks for making sure you showed all of the procedure and not leaving out important parts, like others do. Great job man!
Any time. Thank you. If you have any questions leave here in the comments I will do my best to help 😊😊
I broke the white rigged end part of interior lock cable doing a door glass while pulling the door panel. I messed with to much, tried to JB weld it back, that doesn't work, ... I thought I'd give it a try, but I created a nightmare Anyhow, the door is in the locked position with the door panel on just like yours. My customer has to go through the passenger side of their car all week. I'll be doing this Friday. Man I'm stressin over this one big time. Glad I found this for hope. Thank Brother God bless!
😳😳😬😬😬 just take you time. If i can do it. You can do it. If you have any questions leave here ..i will do my best to help 😀
I kicked my door shut and now I gotta do the same thing. Looking like a damn idiot climbing over to the driver side every day
@@glove8888 😂😂😂😂😂😂😂 u not the only one
Thank you for posting this video. Same car, same door and my actuator went out in the locked position. What a pain in the ass. Lol 😂
I feel you pain 😄😄😄😄. I glad this video helps you . Any question. Leave here. I will do my best. To help 😀💪💪💪💪
Thanks mate, does helped me.
Glad it helped
Great video!!
@@MikezGreat90 thank you I appreciate 🙏
does this mean that after breaking it, I have to replace the actuator?
In this case the actuator is bad thats why. The door wont open. 😅. So dont. Worry if you break it.
If I pop off the actuator the way you did. Will it ruin the actuator itself?
The actuator is already bad. Thats why you door wont open. Other then you. Fuse. --Switch -- or connector. Not working fine.
Hey, help!! My 2007 honda civic were lacquered only the doors, and now the lacquered doors does not work, And to open with a key it does not work either that can be
@@maithogpofficial4933 should be you door actuator
Thanks for sharing.
During the speaker replacement I closed (the front right door ) and its locked so can not open. Should I remove the plastic part to unlock? Thank you so much.
So is not get open. With the unlock and lock button??? If not you maybe unplug something. Or pull the wires too much. And not. The. Door actuator is not working. And got stuck in the lock position.
Or. The metal rods. Got lose from the latch. But. You can do. Manual. Just remove the plastic. The. Take it look the rods. If they still attached to the actuator And. The door handle. And try to move them. Down. And see if you can get it unlock.
If i do this will i still be able to unlock from the outside to use the passenger door since it doesnt have a place to unlock from the otherside
@@oliviaseitz7719 if you replace the part. Yes.
I will do it to my car thanks 🙏🏽
Civic si 2 door is it going to work the same way ?
Yes. The same way.
@@1Wayfix thx a lot
@@Journey819 sure no problem. Any question leave here. I will do my best to help. 😀
I solve the problem by changing my side mirror, then another problem pop up, thats when i closed the door and openning again, it wont open. Tell me if i slightly open the door panel on upper part, is it possible for me to pull and push the lock cable?
@@alejandromejorada what i did on mine is pull away the door panel with the door closed ( you need to pull very hard, watch for any bolt still screw on your panel) after you successfully remove the panel what you can see is all the rod that goes the door hatch, what mine did is the rod broke and there was no way to open the door from inside or outside. so after the panel is remove you legit, like literally need to broke the actuator (the plastic that cover the door hatch like in the video and then you get a screw driver and pull the metal hatch manually and your door will open
same with honda civic 2004?
Yes. Should be the same.
Thank you ✌
Sure any time. 😃😃🙏
Thanks bro!!!!
Any time 😀
Thanks this help me
I glad that my video. Help you. Any other question leave here. Thank you 😃
what if you are on the outside and you need to open it
Did you lost the key ?????
Or. You outside handle is broke ?
My man needs to have a flat head screw driver for prying yo. Watching him struggling with the philips to pry is painful.
@@Will_Fong for sure a flat head. ⬅️⬅️⬅️
How do you beat up the hatch ?
Try to get a flat head. In the middle. Like you trying to split the white plastic in half.
Thank you.
You're welcome! Any question leave here I will do my best to help 😄😄😃😃😃
big help
Thank you. Thats Why i share. It Was hard for me to find the way to. Open that door. Any question leave here. 😃
Usa un desarmador plano chingados man 💀
@@rivera_civic 😂😂😅😅