Відео

@@Pitjefe_bbq at the dealership

@@Pitjefe_bbq here MU5Z-14526-C. Thats the part number.

@ what was the product name please

@ 300 amps mega fuse

@ thank you

@@WilmerAndino-h5l 😄😄😄arabe. Solo la barba . Gracias por tu comentario se te agradece 🙏

@@athao7877 thank you for you comment. I appreciate 🙏

@@diegospizzo1475 this hondas most the time leak from the rack and pinion seal. Close to the. Inner tie rod

@@diegospizzo1475 or it will leak. From the power steering pump. On the return line plastic elbow seal.

@ Its leaking from the passanger side, and the pump seems to be wet, It might be the plastic elbow... Makes sense. Thanks. Do you recommend buying a new hose with the metal clamp?

@@diegospizzo1475do this first. Buy a can of brake cleaner. Spray all the way around. Where the fluid is. Then let it dry. Then start the car. Do a couple of turns. On the steering wheel. Then check. Again. U probably will see where the leak come from. Do this with the front of the car lift it. So u can se exactly straight to the pump. If the leak is from the elbow. Replace the elbow. It will come with the o ring seal. If is from the hose. U can cut the hose and just push back in place. ✌️

@@1Wayfix Ah! I didnt know that hose trick, thanks a lot man! I really appreciate it

@@steveeickmeyer4067 muchas Gracias. Me alegra que mi video le haya podido ayudar. Igualmente. Para usted 🙏

@@dougjones4987 ur welcome. Dios bendiga su vida y familia también🙏

@@AnthonyValerioXD if you mean the part that I replaced. That cost me around 179$. If i not wrong

@@clearblueswamp4328 I understand. Yes. At the intro. I will try my best next time. 🙏

@@DevenMcDaniel this is 2012 if i not wrong.

There is no music in the video. 🤔

U right. No need it. And depending where u leave. Most the time. When the cv axle is bad we replace the all axle.

@@richardpope9985 yes. For sure 👍

@@richardpope9985 thank you. For you comment 🙏

@@richardpope9985 thank you 🙏

@@mustangpapi76 thank you. For being here. 🙏

@@swav100 no 2wd

@@xIIsTReeTIIx u may have to deep in to the diagram. And check you. Cluster. The negative sensor. On the wire.

@@jgrijalva1998 well i did because They not the same jdm transmission will not fit. Straight forward in to the engine. Everything is the same but not the casing

Dont need to remove the away bar. Do this way. Let the engine tilt to the back. Then Bring you transmission closer to the engine. Then Tilt the tail of the transmission. That way U transmission will match the angle of the engine. Then just push it in to the guides of the engine. And align you torque converter studs. And good to go.

@1Wayfix thanks

@@brianmooney7009 thank you. For you comment. 😃😃🙏

Yes they will. Or go in the market place. U will find a cheaper. Person with the right tool to do it

That will be different.

@@ismaelcarmona7461 i glad u found it 😄✌️

@@SouthForkEnduro manual. The only difference. Will be. That u will have to remove. The shifter on u manual transmission to make a room to drop it off. So first lift the boot from the shifter. Then. U will see the bolt. That hold the shifter in place then removed them

No is 3.6 v6 engine

@1Wayfix Thank you

@@TJJorg 😱 it happens sometimes 😅.

@@juliotorres3161 thank u so much for you comment. Don’t forget to activate the bell. More videos coming up. 🙏🙏🙏

@@thingamajig6542 thank. You. I glad. This video help you. And save u money 🙏😃

@@emmettdvm thank you for been here. I appreciate 🙏🙏

If wont come off. U will need. Some heat like a torch. To get it lose

Thank you for you comment. 🙏 I appreciate

Any time. 😃🙏

@@Farmhousekennels check. The tag on u transmission then Compared to the 2004. Tag.

@@susulipi 🤣u right

@@joemeza8362 no part 2. But if you have any questions. Let me know. I may can help.

@@msenglish8382 Any time. 😃

@@Goldtoysrock well. But u got done. 👏👏 next time will be easier 😁

@@voip4life thank you. For. U comment. I appreciate 🙏😃

@@alvarocarrion1715 thats. A good idea but. Sound. Too much. If. Someone dont have to floor jacks. 😅

I like that tip. Thanks you for you comment. I appreciate 🙏

Any time. Thank you for stop by. 🙏

@@GeorgetaMiller can u explain. ? All depends If you take the intake manifold. Out. Or. Not.

@@jaytfo my pleasure. Any time. 😃

@@philipponka3644 thank you. For the comments. I appreciate. 🙏🙏

@@PabloHernandez-rx6ow yes. But. I. Ever recorded. My bad.

@@1Wayfix was there anything complicated removing the head

@ not really. Just the timing cover. Is the one. That take u time. To take it. Off.

@@1Wayfix yea I noticed due to little space but still doable

@ Yes sir

@@IndoctReeducate at the dealer. I cont remember the part number. I think is in the comments.

@ thank you, you did flash the part # in the video and I got it from there. The only place I can find it at is the dealer with a 3 day wait due to shipping smh… I’m still worried that’s not my issue though. I replaced the battery, alternator, and the negative terminal sensor. I’m at 1300$ in parts now and I still have the “Service Battery System Now” light. When you changed the “mega fuse” in the video you didn’t have to remove the fuse box right?

@ no. If you can get a cheap voltmeter. And. Check. You mega fuse. First. Like i did on the video

@@1Wayfix will do, thank you

@@ferniequiroz1948 thank you 🙏

@ that video is a perfect video. Keep it up buddy step-by-step awesome

🙏🏼🙏🏼👍🏼👍🏼

@@lilrex2015 any time. Thank u for you comment. 🙏🙏