Great video. Very helpful. Hope you can help me with a similar inquiry. Have you noticed that the user manual fuse diagram and the fuse box are a little different? Do you happen to know which is the fuel pump fuse? The manual says It is F14 but there is no 30 amp fuse there. I took out a 30 amp fuse next to F14 and the engine never turned off. I could use a little hand here.
Hi there great video ive just fitted recon starter because of failure to start and still cant turn engine over. I first had intermittant starting problems and then a clicking which after numerous attempts turned engine over and then finally one day no clicking just silence and couldnt start my van. After fitting the newly recon starter which apparently bearings shot it and brushes had it do you think i may have blown a fuse or relay, i know where the fuse is but not the relay. Could you please point me in the right direction, thanks.
Hi Steven. You will need to check the connection to the starter solenoid, single small gauge wire, for battery voltage when key is in the crank position. If no voltage present best bring to an auto electrician. If your van is same as the one in the video the relay is built into the BCM and is not serviceable in the conventional sense of simply replacing it. Best of luck
@@mobileautomotiveservices5461 Hi there thanks for your reply, regarding the relay as a no-no then i looked further and found out where starter motor fuse is which had blown my only hope now is there hasn't been anymore damage to other components. Thanks again.
![Ford Focus Mk2. No start, no crank, immobiliser error/ Ecu/ Pats 16. [English subtitles]](/img/n.gif)
Thank you,so what is major problem solving please.
Great video. Very helpful.
Hope you can help me with a similar inquiry. Have you noticed that the user manual fuse diagram and the fuse box are a little different? Do you happen to know which is the fuel pump fuse? The manual says It is F14 but there is no 30 amp fuse there. I took out a 30 amp fuse next to F14 and the engine never turned off.
I could use a little hand here.
Hi can you help same problem I bought new module and I still have same problem
Hi great vid at moment my wipers not workering sreen washers working any ideas checked and changed fuse
Hi there great video ive just fitted recon starter because of failure to start and still cant turn engine over. I first had intermittant starting problems and then a clicking which after numerous attempts turned engine over and then finally one day no clicking just silence and couldnt start my van. After fitting the newly recon starter which apparently bearings shot it and brushes had it do you think i may have blown a fuse or relay, i know where the fuse is but not the relay. Could you please point me in the right direction, thanks.
Hi Steven. You will need to check the connection to the starter solenoid, single small gauge wire, for battery voltage when key is in the crank position. If no voltage present best bring to an auto electrician. If your van is same as the one in the video the relay is built into the BCM and is not serviceable in the conventional sense of simply replacing it. Best of luck
@@mobileautomotiveservices5461 Hi there thanks for your reply, regarding the relay as a no-no then i looked further and found out where starter motor fuse is which had blown my only hope now is there hasn't been anymore damage to other components.
Thanks again.
hi mate citroen peugeot dealers not very helpful