This is 4 years later but this helped me today. I spent 2 hrs on part 6 because the screws wouldn’t fit. I decided to follow your video and boom by the time I put the head/foot boards on the screws could be locked. Thank you!
@gigabad948 I had to lift it and hold the piece in as the other person screwed in screw - it's a tough one, cause you gotta lift and push in at the same time
It took me until this video to realize the parts are split between box 1&2 but bag #1. So glad I took a minute to review this video before continuing. Thanks!
This bed is a daunting task to try and do by myself. But after watching your video, then following along during the build, it made all the difference in the world. Thanks so very much for making sense of it all.
I totally forgot to install the white washers on the head and foot board and the drawers wouldn't slide in! Thanks for correcting my mistake. Keep up the good work!
We did it! Your instructions were spot on. The only change I made is in the beginning hooking those wing parts on by myself, it was hard to do. So I slid those big pieces underneath to hold them up. I waited to cam them down. Having my husband able to help later made it a bit easier but we have a small room like you had. Quite an adventure!
Was gifted this partially assembled bed from my in-laws... with no instructions on how to put it back together. This video was a HUGE help! Thank you so much!
This is absolutely amazing. Great time saver, if you're a rookie like myself following step by step nonstop. It'll only take you around 4 hours. And that's pretty good in my opinion. But if you have electrical screw driver, I'd say you'll be done in 3 hours. Just a screw driver sucks man. Great video 10/10
My fiancée and I will be putting our new Brimnes bed together tomorrow. So glad I found this video so I know what we are in for and know what not to do! I’ve also asked my Dad if we can borrow his drill so we don’t have to do it all by hand 😂 Thanks for the tip!
Did you do it and if so how long did it take you? I'm planning on building mine this week with my uncle who agreed to help but we'd love to know how long it could take us with the electric screwdriver... hopefully just a few hours! 😅
So we cant seem to get the middle dividing panel at 3:28. The screws dont seem long enough, the locks can't grasp them. 😢. Any hints or ideas. Did everything as soon. They still wont grasp the screw head.
Many thanks for your instuctinction video .We managed to put this bed together in just 5 hours without using the manual. It worked out perfectly for us
Thank you, we had a couple of scary moments, not knowing what to do next. Your explanations are very clear , detailed , without annoying music. You save the day ! and the sanity! Thank you again.
Thanks so much. I know nothing about putting things together but I put this bed together watching your video. I never would have been able to follow the Ikea instructions.
Thank you for these clear instructions! Thanks to your video, I was able to build the bed in just one hour. I’m very grateful for the guidance and effort you put into this video. Super helpful!
Update: I did it! It took me about 6 - 6½ hours to finish everything including putting my mattress on the new bed frame! I'm literally exhausted, but it was worth it! I started with the drawers and finished with the base. The biggest challenge I faced was connecting the base to the front and to the back. My floor is uneven, so it didn't go as smoothly as I had hoped for. Anyway, I did well, and this video gave me the courage to do it myself. I also saved some money (Don't have to pay a handyman to do it for me.)
I don’t think I would be able to do without your instructions, you have saved me hours, many videos on UA-cam but not like yours as detailed, thank you 🙏, subscribed and liked! You are credit to UA-cam
Many thanks. As someone who is useless at DIY this video helped me put the bed together with no mistakes at all. Took a bloody long time, but wouldn’t have been able to do it all without the video.
I bought this bed and then stared in despair thinking I had made a huge mistake. Thank you for the video it really helped me out and my bed looks great!
I need help 4:33 when I put both panels in the medal screw thing is not long enough for the other side and even when I twist the things to secure it just come out anyway
Thank you so much for this video! Getting our daughter the Brimnes today with the bookshelf headboard. This will make assembly much easier this weekend!!
Omg finally done. Did it by myself (alone) and it took 6.5 hours. But your video helped me so much! A little tip: be sure the screws on the rails for the drawers are really tight and completely in! Otherwise you will have problems at putting the drawers in and using them. Sadly securing one screw in the cross didn't work. It seemed like the hole for the Screw was a bit too long so the screw wasn't able to really stick out. The metal thing couldn't secure it :/ But the rest of the frame fixed that and I put a board underneath so it can't bend down.
I don't usually subscribe to this kind of channels, but you, sir, are absolutely amazing and deserve it. Thank you for your hard work. The video is very helpful. All the tips and close shots were perfect!
The side panel will not stay connected to the center panel (3:34) . The cam lock is in the locked position but it still slides out. Broke one of the locks trying to connect. Any suggestions??
Absolutely brilliant. Thanks so much for taking the time to put that together. Much easier than scratching my head trying to figure out the manual! 😀🙏👍🏼
I’ve been trying to build this bed for 2 days and I’ve nearly lost my mind. Me and my partner have had like 3 domestics and my rage is so bad I feel like my heart is going to explode. Had to have a Big Mac meal to calm down. You should see the state of my bedroom.
Thank you so much still fixing kind of stuck on the middle tricky part like you said but just keep watching your instructions as manual book not that useful. Thank you so much May Allah bless you And shower His blessings upon you.
Used your video last night mate and managed to get the bed up without any major hitches, saved us so much time and stress. Subscribed for future videos. You’re a legend.
Have seen lot of your videos, all are so detailed and clear..... you do such an amazing job. I am sure all the people who see your videos would be saving tremendous amounts of time, keep up the good work.
The metal rods for the middle of the frame at 3:40 of the video don’t seem to be long enough to catch the metal connector for mine. I did the quarter twist as you recommended thinking that was my problem, but they still don’t seem to stick out long enough.
I'm currently struggling with this bed for over an hour I can't make the middle part stick together one side is always getting undone .. and I don't know why I fallow every step I've put together so many IKEA stuff but this bed is my undoing 😢😢😢
I have just made this bed, your instructions were superb. I have a problem, which is not your fault, two of the screws to slid the draws in went flat and I got help to try to fix it but one of the draws does not close. I could not take the screw back out. Everything else was great, if you have any ideas how to solve this problem I would be greatful. thanks.
I'm having a hard time picking which brand and type of bed to buy from IKEA. Either MALM with drawer storage or this BRIMNES with drawer storage as well. But after watching this video and saw the drawers are connected to the bed frame by slide rollers while the MALM is not, just wheels rolling on the floor. Thank you for this
I’m at the step at 3:54. The two side pieces still try to come apart after I tighten the + screws on them. Is that normal? Or am I doing something wrong?
@@normalgirl27 Hey, I did finish building it but I ended up just returning the bedframe LOL. For this step, I just had to make sure I didn't fully tighten the cams until I placed the other 2 in and half screw those in. You'll need to do the same for the future steps too so make sure to troubleshoot this step first.
I am having the same problem. I have taken apart several times, but base pieces will not stay locked in when you put bottom pieces on bed. The long screws do not seem long enough. Do the screws come longer?
I solved the problem after 3 days make sure when you insert those long screws into other side the cam should be directing towards open direction and not pushed in when you hinged the screw in just gently slide one cam inside and turn screw to about quarter you should feel the friction or pull effect to bring the board closer if there is tension it’s good thing do same for cam above you don’t need to tighter the cams on other side as long it tightens up what happened in my case that when I tight one side the other side cam tighten on it’s own
Thank you very much for following the instructions of IKEA and giving your extra tips! Excellent video! I made it by myself (and with an electrical screwdriver) in two days - first bed, approx 4hrs; second drawers 2hrs. Great to respect your pace and see such a good result at the end :)
17:14 I´m really struggling with this part, for me the screw just turns on its place not really bringing the two parts together firmly at all. could that be because I´m missing the electrical drill, instead doing it with a normal screwdriver? thank you for the video
This was soo helpful thank you!!! They've changed the slats a bit I guess but other than that this was exactly the process and the video made it so much easier
Right now I’m at the part 5:55 I see where you did it but I had to put in the smaller wooden ones n in the middle part I accidentally pushed the top one in to far n now the middle part the long piece I have in the the screws are not even tho but I’m getting it slowly and I had to force the small wooden ones in bc the middle sized ones didn’t work and now I’m on the headboard
Thank you for an excellent step by step video for assembling the Brimnes bed. One small comment, there are two more plastic legs one each in the middle of the thin panel on the underside of the bed, joining the headboard and footboard.
I'm watching the video after I assembled my bed :P. This video could have saved me a lot of time, if I had seen it earlier. It was fun assembling the bed frame.
Thank you, your video it was really basic but I have a problem with the drawers. how can i adjust them? they are too high and do not fit well into the housing.
Thanks for the very clear video! I have one problem.. the drawers are not totally straight. Each drawer has the right side sticking a bit out and hanging a bit lower. Have you got any idea what could cause it?
For customers information if you have week hands, fingers or arthritis, I bought a ratchet right angle screwdriver and wow, the ease of putting this thing together was amazing after after I bought that thing. Trust me, get a ratchet right angle screwdriver! Not everyone has a drill.
Literally didn't use the manual at all and just followed this video. Thank you so much it was very simply put!
How long does it take on average to complete this bed?
Sub it took me five hours
Lol u so bad
Took me five hours as well but no electric tools were used,could have reduced it to 3 hours
About to start one now, the manual looks absolutely awful to follow. That's why I'm here. haha
This is 4 years later but this helped me today. I spent 2 hrs on part 6 because the screws wouldn’t fit. I decided to follow your video and boom by the time I put the head/foot boards on the screws could be locked. Thank you!
Was it the middle screws you had problems with? I can't get them to lock 😭
@@quality_rachni same bruh whatd you do?
@gigabad948 I had to lift it and hold the piece in as the other person screwed in screw - it's a tough one, cause you gotta lift and push in at the same time
@@quality_rachni thank you🙏 just as i fixed it i sawthiscomment, but i appreciate it thx
Just used this video today, would’ve been sleeping on a mattress on the floor if this didn’t exist as ikea instructions were hopeless. Thank you 🙌
It took me until this video to realize the parts are split between box 1&2 but bag #1. So glad I took a minute to review this video before continuing. Thanks!
This bed is a daunting task to try and do by myself.
But after watching your video, then following along during the build, it made all the difference in the world.
Thanks so very much for making sense of it all.
You right, this one os not so easy to put together. Thank you for watching
this man is my youtube dad. thank you.
Thank you for watching ''son'' ;)
Loved it, really clear even for people who has never done it before. Didn’t use the manual one and made the bed in 2 hours
I totally forgot to install the white washers on the head and foot board and the drawers wouldn't slide in! Thanks for correcting my mistake. Keep up the good work!
Thank you for watching
We did it! Your instructions were spot on. The only change I made is in the beginning hooking those wing parts on by myself, it was hard to do. So I slid those big pieces underneath to hold them up. I waited to cam them down. Having my husband able to help later made it a bit easier but we have a small room like you had. Quite an adventure!
Glad it worked. Thank you for watching
Was gifted this partially assembled bed from my in-laws... with no instructions on how to put it back together. This video was a HUGE help! Thank you so much!
This is absolutely amazing. Great time saver, if you're a rookie like myself following step by step nonstop. It'll only take you around 4 hours. And that's pretty good in my opinion. But if you have electrical screw driver, I'd say you'll be done in 3 hours. Just a screw driver sucks man. Great video 10/10
My fiancée and I will be putting our new Brimnes bed together tomorrow. So glad I found this video so I know what we are in for and know what not to do! I’ve also asked my Dad if we can borrow his drill so we don’t have to do it all by hand 😂 Thanks for the tip!
Did you do it and if so how long did it take you? I'm planning on building mine this week with my uncle who agreed to help but we'd love to know how long it could take us with the electric screwdriver... hopefully just a few hours! 😅
You just saved me hours and my sanity. THANK YOU!
0
So we cant seem to get the middle dividing panel at 3:28. The screws dont seem long enough, the locks can't grasp them. 😢. Any hints or ideas. Did everything as soon. They still wont grasp the screw head.
ua-cam.com/video/tCCFX7uCSv8/v-deo.htmlsi=rTsezxDQps0Y4Zqf
After moving to a new place, I used your video to assemble the bed. This time it went much smoother 😊 thanks for sharing
My wife and i just put this bed together. Watched this video twice before we started. Invaluable!! Thank you!
Thank you for watching
How long did it take y’all? I’m about to build it on my own
@@catsNplanets 2.5 hours or so. We consider ourselves Ikea furniture building experts though. 😂
Is it sturdy enough for 2 adults? 200kg combined?
@@marieorcullo6208 My wife and I are about 165kg and it is sturdy enough for us.
Thank you so much you helped me so much I did not even use the manual
Glad it worked for you . Thank you for watching
Thank you for watching
Many thanks for your instuctinction video .We managed to put this bed together in just 5 hours without using the manual. It worked out perfectly for us
Glad it worked for you. Thank you for watching
Thank you, we had a couple of scary moments, not knowing what to do next. Your explanations are very clear , detailed , without annoying music. You save the day ! and the sanity! Thank you again.
Thank you for watching
wow best and most useful Video on UA-cam thank you so much. I was about to pay almost 100€ to mount my bed same like this but now i can fix it myself
Thanks so much. I know nothing about putting things together but I put this bed together watching your video. I never would have been able to follow the Ikea instructions.
Thank you for watching
Thank you for these clear instructions! Thanks to your video, I was able to build the bed in just one hour. I’m very grateful for the guidance and effort you put into this video. Super helpful!
Update: I did it! It took me about 6 - 6½ hours to finish everything including putting my mattress on the new bed frame! I'm literally exhausted, but it was worth it! I started with the drawers and finished with the base. The biggest challenge I faced was connecting the base to the front and to the back. My floor is uneven, so it didn't go as smoothly as I had hoped for. Anyway, I did well, and this video gave me the courage to do it myself. I also saved some money (Don't have to pay a handyman to do it for me.)
Fantastic that's why I do this. Thank you for watching
Thanks, took a 7 hr project down to 5. lol. Seriously, excellent video
Glad it worked for you. Thank you for watching
I don’t think I would be able to do without your instructions, you have saved me hours, many videos on UA-cam but not like yours as detailed, thank you 🙏, subscribed and liked!
You are credit to UA-cam
Thank you for watching
Many thanks. As someone who is useless at DIY this video helped me put the bed together with no mistakes at all. Took a bloody long time, but wouldn’t have been able to do it all without the video.
Thank you for watching
Thank you so much, the bar on the bottom of the drawers was confusing me so much. Life saver
Thank you for watching
I bought this bed and then stared in despair thinking I had made a huge mistake. Thank you for the video it really helped me out and my bed looks great!
I need help 4:33 when I put both panels in the medal screw thing is not long enough for the other side and even when I twist the things to secure it just come out anyway
Did you find a solution? I am having the same problem
@CristinaZamora did you guys find a solution
Same problem
@valoraaaa it works you just have to mess around with the screws and how they catch, I had to get someone else to hold it in place
Thank you so much for this video! Getting our daughter the Brimnes today with the bookshelf headboard. This will make assembly much easier this weekend!!
Thank your time with assembly this one is not the easiest to put together. Let me know how it goes. Thank you for watching
Thank you for helping me and my boyfriend build our new bed.
Thank you for watching
You are a saviour, thank you. The manual was awful so your guidance was invaluable.
Thank you for watching
Your video safed us a lot of time when we assembled this bed, many thanks.
Omg finally done. Did it by myself (alone) and it took 6.5 hours. But your video helped me so much!
A little tip: be sure the screws on the rails for the drawers are really tight and completely in! Otherwise you will have problems at putting the drawers in and using them.
Sadly securing one screw in the cross didn't work. It seemed like the hole for the Screw was a bit too long so the screw wasn't able to really stick out. The metal thing couldn't secure it :/ But the rest of the frame fixed that and I put a board underneath so it can't bend down.
Glad it worked. Thank you for watching
Awesome. Would not have completed the bed at all with IKEA instructions. Thank you
just finished making this bed by myself!! thanks for this video, it's still helping people :)
Glad it worked for you. Thank you for watching
I don't usually subscribe to this kind of channels, but you, sir, are absolutely amazing and deserve it. Thank you for your hard work. The video is very helpful. All the tips and close shots were perfect!
Thank you for watching
The side panel will not stay connected to the center panel (3:34) . The cam lock is in the locked position but it still slides out. Broke one of the locks trying to connect. Any suggestions??
I have the same exact situation
Thanks man I just bought the bedframe used and have to reassemble it.
you're my hero for this. thank you
Thank you for watching
OMG I'm still kinda freaking out doing this on my own. O well. Thanks so much 4 this I don't feel as alone anymore ❤️❤️❤️
I’m about to do the same thing…pray for me
Not so easy this one hope it works. Thank you for watching. Let me know how it goes
@@catsNplanets Lets goooo look like woman team good luck girls let me know how it goes
@@catsNplanets We got this 👍 💪
@@jimzflowerify I’m working on mine rn. So far so good!
Absolutely brilliant. Thanks so much for taking the time to put that together. Much easier than scratching my head trying to figure out the manual! 😀🙏👍🏼
Thank you for watching
I’ve been trying to build this bed for 2 days and I’ve nearly lost my mind. Me and my partner have had like 3 domestics and my rage is so bad I feel like my heart is going to explode. Had to have a Big Mac meal to calm down. You should see the state of my bedroom.
Yes this one is not so easy if you new to this.
Thank you so much still fixing kind of stuck on the middle tricky part like you said but just keep watching your instructions as manual book not that useful. Thank you so much May Allah bless you And shower His blessings upon you.
Thank you for watching
Used your video last night mate and managed to get the bed up without any major hitches, saved us so much time and stress. Subscribed for future videos. You’re a legend.
Thank you for watching
Have seen lot of your videos, all are so detailed and clear..... you do such an amazing job. I am sure all the people who see your videos would be saving tremendous amounts of time, keep up the good work.
Thank you for watching
Best tutorial video of any kind! Didn't look at you manual once. Thank you!
Thank you for watching ;)
Thank u! Without this video I would literally spend days with the ijea manual
Thanks a lot for the video!! I didn't even use the manuel, your explanation and demonstration was more than enough ❤
Thank you for watching
The metal rods for the middle of the frame at 3:40 of the video don’t seem to be long enough to catch the metal connector for mine. I did the quarter twist as you recommended thinking that was my problem, but they still don’t seem to stick out long enough.
I am having the same issue with that step. I have tried to “catch” the connector so many different ways.
Tell me if you find the solution!!
I'm currently struggling with this bed for over an hour I can't make the middle part stick together one side is always getting undone .. and I don't know why I fallow every step I've put together so many IKEA stuff but this bed is my undoing 😢😢😢
i don't have this bed I'm just love watching you sir loooove your work ❤️👌
Interesting there were some people commenting they just watch or listen like ASMR ;) Great, thank you for watching and listening.
Thanks for doing the video, watched and followed. You made it so easy
Thank you for watching
I messtup on the middle of the base,now I can’t take off that little circle thing ,it doesn’t even connect ,what can i do ?
ua-cam.com/video/tCCFX7uCSv8/v-deo.htmlsi=rTsezxDQps0Y4Zqf
I have just made this bed, your instructions were superb. I have a problem, which is not your fault, two of the screws to slid the draws in went flat and I got help to try to fix it but one of the draws does not close. I could not take the screw back out. Everything else was great, if you have any ideas how to solve this problem I would be greatful. thanks.
Legend, keep up the good work mate ✨
Thank you so much for your video. I just re-assembled it today thanks to you. We had a second hand one with no idea where to start
Thank you for watching
Thank you very much, video is super for those who buy ikea furniture!
Thank you for watching
I'm having a hard time picking which brand and type of bed to buy from IKEA. Either MALM with drawer storage or this BRIMNES with drawer storage as well. But after watching this video and saw the drawers are connected to the bed frame by slide rollers while the MALM is not, just wheels rolling on the floor. Thank you for this
Yep exactly me. Can't decide but because the draws are connected to the bed I may go with this one
I’m at the step at 3:54. The two side pieces still try to come apart after I tighten the + screws on them. Is that normal? Or am I doing something wrong?
they keep falling apart for me too,, i just put something under it so it levels out. did you ever finish building it?
@@normalgirl27 Hey, I did finish building it but I ended up just returning the bedframe LOL. For this step, I just had to make sure I didn't fully tighten the cams until I placed the other 2 in and half screw those in. You'll need to do the same for the future steps too so make sure to troubleshoot this step first.
Thank you very much I did not have to use the manual I only had to follow your video. You are the best..Thank You
Thank you for watching
I'm really struggling to put this together - the two central pieces are refusing to lock into the big part in the middle
Were u able to fix it? Were having the same problem
@@JroNava yes - you need to lift the pieces and shove them together whilst the other person tightens the screws
I am having the same problem. I have taken apart several times, but base pieces will not stay locked in when you put bottom pieces on bed. The long screws do not seem long enough. Do the screws come longer?
I solved the problem after 3 days make sure when you insert those long screws into other side the cam should be directing towards open direction and not pushed in when you hinged the screw in just gently slide one cam inside and turn screw to about quarter you should feel the friction or pull effect to bring the board closer if there is tension it’s good thing do same for cam above you don’t need to tighter the cams on other side as long it tightens up what happened in my case that when I tight one side the other side cam tighten on it’s own
Thank you very much for following the instructions of IKEA and giving your extra tips! Excellent video! I made it by myself (and with an electrical screwdriver) in two days - first bed, approx 4hrs; second drawers 2hrs. Great to respect your pace and see such a good result at the end :)
Glad it worked. Thank you for watching
Thank you. Your explanation was very helpful to me
Thank you for your easy to follow instructions ( the instructions that Ikea provides is very vague.
Thank you for watching
17:14 I´m really struggling with this part, for me the screw just turns on its place not really bringing the two parts together firmly at all. could that be because I´m missing the electrical drill, instead doing it with a normal screwdriver? thank you for the video
This was soo helpful thank you!!! They've changed the slats a bit I guess but other than that this was exactly the process and the video made it so much easier
Thank you for watching
Thank u so much!!🤍 the best video I’ve ever seen
Thank you for giving a thorough instruction on how to assemble this bed frame. Fingers crossed, I'll make myself proud.
THANK YOU SO MUCH FOR YOUR VIDEO! Helped me and saved not only time but also me from paying someone to built the bed for me! Keep up the good work!!
Thank you for watching
Why won’t all 4 cam locks lock?? Only 2 of ine lock and the other 2 on the other side don’t. I am losing my mind and have been trying my for days
Same issue I'm having
Just wish I could put a like every time I comeback for help. THANK YOU 🙏🏿
Many many thanks for your tutorial! It was very useful!
Thank you for watching ;)
How do you fix drawer not going all the way in?
Thank u so much for your video. U made my work so easy
thank you very much. it was really helpful :)
Thank you for watching
I’m about to start this process I’m nervous about it but I’m hopeful ur tips will help me with this
Just take your time this one is not so easy. Let me know how it goes.
Right now I’m at the part 5:55 I see where you did it but I had to put in the smaller wooden ones n in the middle part I accidentally pushed the top one in to far n now the middle part the long piece I have in the the screws are not even tho but I’m getting it slowly and I had to force the small wooden ones in bc the middle sized ones didn’t work and now I’m on the headboard
This video was really helpful, thank you!!
Thank you for watching
do you know if it is ok to assemble it without the drawers? I want to put a trundle underneath. Thank you
Thank you for an excellent step by step video for assembling the Brimnes bed. One small comment, there are two more plastic legs one each in the middle of the thin panel on the underside of the bed, joining the headboard and footboard.
I'm watching the video after I assembled my bed :P. This video could have saved me a lot of time, if I had seen it earlier. It was fun assembling the bed frame.
Great job mate….. you saved me a lot of time…. Thanks
Thank you for watching
Hi i put black plastic on sides and 2 in middle it is making noise when kids jump . Is that important to fix or just leave that?? Thankx
Thank you, your video it was really basic but I have a problem with the drawers. how can i adjust them? they are too high and do not fit well into the housing.
This was so HELPFUL!
Thanks alot!
Thank you for watching
😀🙏@@PPFlatPack
15:49 what if I installed the middle metal thing the wrong way? confused sides
where do you find that and what is it called
I’m building my bed but I don’t see the metal middle thing in the box do I buy it separately
Thank you so much for this video, I followed your video only, very well explained, just perfect ! God bless you 🙏🏼
Thank you so much!!!
Thanks Man ,it was so easy to assembly the bed with this video..
Greetings
Thank you for watching
Thank you sooo much🙏
I followed Yur video and put it together in 3 cocktail 🍹 hr it was perfect 👍 thanks 😊 love
PP FlatPack my guy ! lifesaver
Great content!! You save our day!
Thanks for the very clear video! I have one problem.. the drawers are not totally straight. Each drawer has the right side sticking a bit out and hanging a bit lower. Have you got any idea what could cause it?
You are a lifesaver… thank you! This saved me some headaches 🍻
Thank you for watching
This was a HUGE help! Thank you so much for this easy step by step process!
Thank you for watching ;)
Really saved me man, thanks.
Thank you for watching
Perfect...you were so helpful. Thanks
Thank you for watching
Is this sturdy and durable enough for daily use of 2 Adults 200kg combined?
For customers information if you have week hands, fingers or arthritis, I bought a ratchet right angle screwdriver and wow, the ease of putting this thing together was amazing after after I bought that thing. Trust me, get a ratchet right angle screwdriver!
Not everyone has a drill.
this video saved me hours of swedish confusion, manual is ok, but this beats everything.
Thanks for posting !
Thank you for watching
Why does one of the drawer not even with the other? I was very careful but my drawers do not close right!?!? 😢