How to Replace Cadillac CTS-V Front Brake Pads and Rotors - Brembo Brakes
Вставка
- Опубліковано 20 сер 2024
- How to replace cadillac cts-v front brake pads and rotors. Similar to Brembo Brakes on Dodge Hellcat Charger and Challenger. How to fix brake noise when stopping and when driving on a cadillac cts-v. Step by Step tutorial on a brake job with brembo 6 piston caliper brakes.
Torx bit Set - amzn.to/3b2DMY8
Pin Punch - amzn.to/351Zklo
Disc Brake Caliper Lube - amzn.to/32cmAvz
Brake Cleaner - amzn.to/2QfOtx3
Backyard Chevy is a participant in the amazon affiliates program. As an Amazon Associate I earn from qualifying purchases.
I assume no liability for anything you choose to do to your own car. All Repairs you perform to your car are performed at your own risk.
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
Hands down the best brake tutorial video I've ever seen!!!!!
Thank you🙂 i really appreciate it
Thorough, great camera angles, and simplified steps!
Thank you🙂
I watch a lot of "how to" videos, you Sir hit it out of the park with this tutorial! Thanks!
Thank you🙂 i really appreciate it
Great video, did my fronts last night totally dependent on your lessons. You are really good to listen to and it was first rate information. Now I have no more brake pulsing!!!! Thanks!!
The Hawks pad for low brake dust! Will do! Thanks Again for the info, just bought this V. Doing some upgrades.
Anytime🙂 thats awesome👍
thanks for the video. no graphics or stupid music just the information i needed. have good one and thanks again buddy
Excellent guide. Thank you so much!
Now that’s how you make a video!! Great job!!
Thank you🙂
Amazing tutorial! I never subscribe to channels but you sir received my sub. Very detailed, perfect video angles and explanation. Thanks!
Thank you so much🙂 i do greatly appreciate it
You just saved me so much money friend, forever grateful!
So glad to hear it🙂 anytime...thank you for the support
@@backyardchevy328 my 13mm bolt running through the caliper sheared off! I feared having to replace the caliper but after your vid i found the bolt for $18! A lot better than $400!! Thanks again. so much. "bridge cross bolt". also informed me of the proper terminology for the part.
@@11CTS-V yea thats definitely a lot better than spending that much🙂 glad u were able to find the bolt
Thank you so much for this extremely good tutorial. Your explanation, camera work and attention to the details is excellent!
Great video! My hawk pads will be here tomorrow.
Thank you🙂 thats great hopefully everything goes smoothly👍
Excellent how to, thank you!
Awesome video!! Is the lock-tight necessary for the two bolts holding the caliper on?
Very good informational video! Thanks much appreciated 🙏
Thank you🙂
Hello, great video, and with your excellent guidance I am doing my 2009 CTS-V brake pad and rotor replace job. I've run in to an initial problem. The front brake rotor hold down screw with the Torx T30 head has stripped out. The screw seems to be a fairly soft metal. I've got a new screw from the dealer. Any advice on what to do to get it out? Yikes. Thanks for any input. - Gary
Great Video Will be doing my front brakes tomorrow. Which Metallic Pad for lowest dust? Great video! Thanks! Ben
Well for less dust id actually prefer the hawks ceramics brake pads..theyre really good brakes all around
That was interesting, never saw a setup like that before.
Yea those are high performance brake setups where u got pistons squeezing both the inner and outer brake pads
I only work on fords for most part, is that standard on Cadillac?
@@darylturcott on the v model cadillacs, corvettes, camaros, even dodge hellcat challenger, chargers. Mustangs would have em too
Great video! I'm assuming the rear installation is more or less the same?
Thank you🙂 yes, i do got a video on the rears as well
Did you apply loctit on all threads?
Appreciate it!
Thank you🙂
One question it looks like the fitted those brake calipers on my Saab 9-3 is there any way you can tell me the part number to those one piece rotors because currently I have the two piece rotors and those things are expensive af $700 a rotor
I have a 2012 CTSV and I’m wondering what brakes to get but saw these Hawk one pop up? Is it really low dust producing and also you don’t need to bleed the brake lines when changing the brake pads? I only ask because I’ve never been shown how to change my brakes lol.
Yea they definitely produce less..and no u dont have to bleed the brakes unless u introduce air into the system by like replacing a brake hose or a brake caliper etc.
@@backyardchevy328 Super awesome thank you for the great video!!
Any brake in procedure? Thank you for your time.
Yea, the way i do it..is you do 5 stops one after the other from 40 mph to 10mph..when ur done with those u wanna avoid a full stop though cause thatll cause an imprint..then do 5 more stops right after from 30mph to 5 mph once again avoid coming to full stop...so from here you wanna drive for 5 mins so it allows ur brakes to cool trying to avoid a full stop...if u have to stop...put vehicle in neutral or park while u wait to go again so u dont imprint brake pads to rotor...in other words u wanna find a empty lot to do this in
What’s the specs on the rotor please
Your prying on brembos with aa screw driver, you chiped the caliper. You take off the caliper which made all the prying unnecessary.
Do you happen to know the size of the punch used for the pins?
Its a 1/8ths pin punch
@@backyardchevy328 thanks man, appreciate it. Real good video
@@Mannystrading thank you🙂
Powertools!! But great vid
Lol...thank you
At 9:00 will anti seize lubricant work or do I need that grease
No, anti seize doesnt work good for anything that constantly moves..its meant for something that doesnt move that u dont want to seize up..so yes youll wanna get brake lubricant
Whats the name brand of your rotors?I have a 2011 V
If i recall correctly i believe they were centric rotors
Hey man can i ask what size is the rotor im running the same caliper set up but am having trouble finding the right size rotors
It depends on the year but these were 370mm for the 2009 cts-v....for the 2012+ they have a 380mm
where did you purchase or order them?
@@ajmorales5320 theyre the centric brand rotors..off ebay
Thanks Man Appreciate it!!!
@@ajmorales5320 anytime🙂
Does anyone know if I can put CTS V calipers on my 09 CTS4?
Well due to it being all wheel drive itd make it somewhat more difficult..but im pretty sure its been done i think i remember reading a post about it
@@backyardchevy328 I will have to keep looking. Thank you!
This guys seems like he drives a mustang as a daily driver . Great video but your taste in cars needs to be better 😉