Hi I got a 2012 Nissan Altima 3.5 sr and the code is p0746 it goes in to drive but does not want to accelerate pass 15 mph , it’s the shift control solenoid A will it be better to change the valve body does the valve body come with new solenoids ?
You can if you don’t want to bother taking it apart again probably save you on money for the tranny oil just make sure new valve body has clean filter ..although a new solenoid isn’t much try solenoid first before buying new body
@@jorgenico1418 I couldn’t find any solenoid forsale so I just went ahead and ordered a new valve body it will be coming in a few days . Do you know how much will the transmission fluid cost me, I just recently bought this car and I’m trying to fix the p0746 code engine starts up good .. the previous owner said he also changed the transmission fluid before I bought the car is it possible to reuse the same transmission fluid or not ? Thank you for responding
Hello I have Nissan Altima 3.5 I am having an issues In CVT When I drive like for 30 minutes and when tyranny is Hot. When I am in slow speed car jerks alot. When I change it to manual mode car is like in 5 Gear while speed in 30 KMH. Obviate CVT doesn't have any gears but it's shows 4 after downside manually. Is it Valve body ? I chexk on computer there is Codes coming . And CVT oil is also clean.
Did you drain your fluid and physically look at your filter…your filter might be filled with shavings also the bottom of your tranny pan might be full of shavings..You might have to change your filter and get new fluid
@@jorgenico1418 actually I change oil twice I change coolant Filter . PAN filter was clean .. and I use petrol for clean too.. I made it dry. I didn't remove Battery wore while I was changing fluid.. but I did doscconevt battery several times for resetting stuff.. I am not getting any codes on Scnanner.. I am thinking about to install additional cooler for Tranny. If the problem doesn't solved than will go for Vavle Body replacement. Three months ago one Crazy mechanic put ATF in my Altima CVT for 5 to 10 minutes .. he told me it will clean tyranny than I'll put NS3. I guess that's my Tranny is having issues
@@explorewithvaly I suggest replacing your stepper motor ..make sure it’s from the dealer I wouldn’t play around with eBay crap…that includes changing the fluid (dealer) again ..changing valve body would be last ditch
Hello so my dashboard show me CVT and brake lights and cant doesn't moving on Driver position and Rear position . so what you think if i change this parts like on your video its gonna be work again or no ? car has 134k mileage . engine work like new . so i got this car from auction and transmission cost 2500$ its too much i think . Thank you and merry christmas
It’s cheaper to change the transmission oil ..plus if you take it apart ..you can tell whether you need a new filter or what not it will run you close to $100 just for oil ..do the work yourself it is easy ..take your time
@@jorgenico1418 thanks for answer so i check with computer i have some mistakes first P0746 and P1778 so you recommend me first change oil and then if problem not going away then buy parts like on your video whole valve body ?! thanks .
Have a JF010E (RE0F09A/RE0F09B) 2009 murano..replaced solenoid A on valve body because of code p0746...installed it all back to factory condition..Now it doesn't move at all....Does anyone why?
@simondabadie8916 try thr stepper motor cannot get them anywhere but Amazon or ebay or something like that part stores do not sell and dealer ŵill try and tell you to replace trans.. almost bet its stepper motor just did my mom's cpl months ago
Usually finger tight you don’t want to torque cuz it’s aluminum you might strip it always check for leaks afterwards in case you need to tighten a little more
How much does a valve body usually run
Is there a way to test to be sure that is the fix for a code p1777? Auto zone gave this as a possible fix with the check engine code
2:25 readings.
Question, where is the temp sensor in the valve body?
Did you remove valve body while trans was still in car?
Of course
Hi I got a 2012 Nissan Altima 3.5 sr and the code is p0746 it goes in to drive but does not want to accelerate pass 15 mph , it’s the shift control solenoid A will it be better to change the valve body does the valve body come with new solenoids ?
You can if you don’t want to bother taking it apart again probably save you on money for the tranny oil just make sure new valve body has clean filter ..although a new solenoid isn’t much try solenoid first before buying new body
@@jorgenico1418 I couldn’t find any solenoid forsale so I just went ahead and ordered a new valve body it will be coming in a few days . Do you know how much will the transmission fluid cost me, I just recently bought this car and I’m trying to fix the p0746 code engine starts up good .. the previous owner said he also changed the transmission fluid before I bought the car is it possible to reuse the same transmission fluid or not ? Thank you for responding
Close to a hundred from the dealer
@joeyy Seee where did you order valve body? did it work for you?
@jorgenico1418 before limp mode did you hear a rumble type of sound? And then it was p0746 ?😅
Does it have to be reprogrammed?
The manual lever have spring ?
Hello
I have Nissan Altima 3.5
I am having an issues In CVT
When I drive like for 30 minutes and when tyranny is Hot.
When I am in slow speed car jerks alot.
When I change it to manual mode car is like in 5 Gear while speed in 30 KMH.
Obviate CVT doesn't have any gears but it's shows 4 after downside manually.
Is it Valve body ?
I chexk on computer there is Codes coming .
And CVT oil is also clean.
Did you drain your fluid and physically look at your filter…your filter might be filled with shavings also the bottom of your tranny pan might be full of shavings..You might have to change your filter and get new fluid
Make sure you disconnect battery before you do the job that way you can clear the codes the car will go in limp mode if there are issues with tranny
@@jorgenico1418 actually I change oil twice
I change coolant
Filter . PAN filter was clean .. and I use petrol for clean too.. I made it dry.
I didn't remove Battery wore while I was changing fluid.. but I did doscconevt battery several times for resetting stuff..
I am not getting any codes on Scnanner..
I am thinking about to install additional cooler for Tranny.
If the problem doesn't solved than will go for Vavle Body replacement.
Three months ago one Crazy mechanic put ATF in my Altima CVT for 5 to 10 minutes .. he told me it will clean tyranny than I'll put NS3.
I guess that's my Tranny is having issues
@@explorewithvaly I suggest replacing your stepper motor ..make sure it’s from the dealer I wouldn’t play around with eBay crap…that includes changing the fluid (dealer) again ..changing valve body would be last ditch
How you took off 15 mm nut , it doesn't move anywhere
Where is the nut located
@@jorgenico1418 it's all good, got it loose. It's the one on the valve body, I used 2 wrenches 14mm and 6mm on 2009 Nissan Murano
Hello so my dashboard show me CVT and brake lights and cant doesn't moving on Driver position and Rear position . so what you think if i change this parts like on your video its gonna be work again or no ? car has 134k mileage . engine work like new . so i got this car from auction and transmission cost 2500$ its too much i think . Thank you and merry christmas
It’s cheaper to change the transmission oil ..plus if you take it apart ..you can tell whether you need a new filter or what not it will run you close to $100 just for oil ..do the work yourself it is easy ..take your time
@@jorgenico1418 thanks for answer so i check with computer i have some mistakes first P0746 and P1778 so you recommend me first change oil and then if problem not going away then buy parts like on your video whole valve body ?! thanks .
@@jorgenico1418 thanks man i changed oil filter and gasket so car work like new ) thank you and happy merry christmas .
Ur past that. U need new pullies and belt and change the flow control valve in the pump and I would also change the torque converter 🤣
Have a JF010E (RE0F09A/RE0F09B) 2009 murano..replaced solenoid A on valve body because of code p0746...installed it all back to factory condition..Now it doesn't move at all....Does anyone why?
Did you disconnect the battery to reset the codes?
IM HAVING THE SAVE PROBLEM DOESNY INTO GEAR HOW TO FIX IT HELP PLEASE, JUST REPLCAED THE VALVE BODY AND FILTER ADD NEW FUILD PLEASE HELP
@@jayenterprises-gv2qydid you found out the problem?
I’m having the same issue.
@simondabadie8916 try thr stepper motor cannot get them anywhere but Amazon or ebay or something like that part stores do not sell and dealer ŵill try and tell you to replace trans.. almost bet its stepper motor just did my mom's cpl months ago
@@jayenterprises-gv2qy try stepper motor read xomment below yours I explained
What is the torque for transmission pan, do you know by chance?
Usually finger tight you don’t want to torque cuz it’s aluminum you might strip it always check for leaks afterwards in case you need to tighten a little more
No