Thanks for this video...your machine looks very very good for its age. I bought a Quest a few years ago and mainly left it in the barn BUT today I started to look at it and will do some small work such as fluid changes etc.. Your video(s) will certainly help me out on this "quest". Thanks!
Nice video, i need to do an oil change too, thanks for the info, let me ask you this, i lost spark not sure if the cdi box is bad but cant find where is it, do you know where is that located at? Can you make a video or send Me a Picture some how? Thanks
I appreciate your videos. I have a 650 that the speedo doesn't work - it lights up, the odometer works, but the speedo never moves. Have you run into that?
I have an issue with a john deere 650 its a bombardier 650 quest with John deere stickers slapped all over it. It runs good for about 20 minutes and then starts backfiring and acting like it's not getting fuel. I've watched all of your videos and alot of them have helped me get this thing going. Drive belt, idle set, oil change etc. I wonder if I have to replace gasket between carb and motor like you did in one of your videos any ideas would be helpful thanks
Mine was doing the exact same, replacing the intake boot between the carb and engine fixed it, I also found a small tear in the boot from the carb to the airbox also I had to fix.
Hey!! I just picked up the same machine from someone who had the starter cover off the starter solenoid not wired and was like parts for this machine are easy to find..bunch of BS. Anyways, I have the service manual and I cant see how to hook up the starter solenoid to the correct wires along with where the external coil wires to. Could you send me some pics of yours for a reference please! Ive been trying ofr months now to get this quest going but no luck..THanks!!
@@PovertyPointCustoms Just wondering if you had a chance to look at the starter solenoid and see where all the wires go including the external coil. :)
These videos have helped me out a lot on my quest. Have you needed to replace any u joints? I need to do my front ones and not sure how to go about it. Thanks for the videos!
Hey dude, i have a question for you, the little screw right under the screw for oil filter, i unscrewed it and red liquid came out. Whatis it and how do i refil it? Thank you
What size TORX wrench do you need to remove the oil filter cover? Sadly, I will need to get this...always something else to buy....I also think it would be a good idea to get an new O ring...would you know this size too? Thanks
I was able to get it unscrewed using an 8mm socket (just be carefully not to strip it), mine wasent on super tight so it unscrewed easily. I'm not sure of the o ring size but I'll see if I can track it down and get back to you
The spark plug is on the top of the motor when you pop the seat off. The last filter is used I got of Amazon if you search:Brand: AHL 4.4 out of 5 stars4Reviews AHL Motorcycle Oil Filter for BOMBARDIER QUEST 650 MAX 650 2004 / QUEST 500 495 2003 2004 / QUEST 650 644 2002-2004 / QUEST 650 XT 650 2002 2003 (PACK OF 2)
Thanks for this video...your machine looks very very good for its age. I bought a Quest a few years ago and mainly left it in the barn BUT today I started to look at it and will do some small work such as fluid changes etc.. Your video(s) will certainly help me out on this "quest". Thanks!
Thank you, hopefully there will be some snow plowing videos soon!
Nice video, i need to do an oil change too, thanks for the info, let me ask you this, i lost spark not sure if the cdi box is bad but cant find where is it, do you know where is that located at? Can you make a video or send
Me a
Picture some how? Thanks
I appreciate your videos. I have a 650 that the speedo doesn't work - it lights up, the odometer works, but the speedo never moves. Have you run into that?
I have an issue with a john deere 650 its a bombardier 650 quest with John deere stickers slapped all over it. It runs good for about 20 minutes and then starts backfiring and acting like it's not getting fuel. I've watched all of your videos and alot of them have helped me get this thing going. Drive belt, idle set, oil change etc. I wonder if I have to replace gasket between carb and motor like you did in one of your videos any ideas would be helpful thanks
Mine was doing the exact same, replacing the intake boot between the carb and engine fixed it, I also found a small tear in the boot from the carb to the airbox also I had to fix.
Always good to check your belt when doing oil changes, nothing worst then blowing a belt in the middle of the woods.
Totally agree, when I swap it out I'll keep the old one as a spare
Thank you. This really helps
Thanks!
Hey!! I just picked up the same machine from someone who had the starter cover off the starter solenoid not wired and was like parts for this machine are easy to find..bunch of BS.
Anyways, I have the service manual and I cant see how to hook up the starter solenoid to the correct wires along with where the external coil wires to. Could you send me some pics of yours for a reference please! Ive been trying ofr months now to get this quest going but no luck..THanks!!
I'll take a look this week and see what I can find
@@PovertyPointCustoms AWESOME THANK YOU SOOOOOOO MUCH!!!
@@PovertyPointCustoms Just wondering if you had a chance to look at the starter solenoid and see where all the wires go including the external coil. :)
@@PovertyPointCustoms Any luck taking a look to help me out with my electrical hookup issue?
These videos have helped me out a lot on my quest. Have you needed to replace any u joints? I need to do my front ones and not sure how to go about it. Thanks for the videos!
Thanks, haven't had to replace them yet
Hey dude, i have a question for you, the little screw right under the screw for oil filter, i unscrewed it and red liquid came out. Whatis it and how do i refil it? Thank you
What size TORX wrench do you need to remove the oil filter cover? Sadly, I will need to get this...always something else to buy....I also think it would be a good idea to get an new O ring...would you know this size too? Thanks
I was able to get it unscrewed using an 8mm socket (just be carefully not to strip it), mine wasent on super tight so it unscrewed easily. I'm not sure of the o ring size but I'll see if I can track it down and get back to you
Hello, where can 1 get one of those filter. I'm from Montreal Canada. Thank you. And where is de spark plug
The spark plug is on the top of the motor when you pop the seat off. The last filter is used I got of Amazon if you search:Brand: AHL
4.4 out of 5 stars4Reviews
AHL Motorcycle Oil Filter for BOMBARDIER QUEST 650 MAX 650 2004 / QUEST 500 495 2003 2004 / QUEST 650 644 2002-2004 / QUEST 650 XT 650 2002 2003 (PACK OF 2)
@@PovertyPointCustoms My VTT is a 2006.
@@PovertyPointCustoms Hoypeyfiy Filtres à huile de rechange pour Sea-Doo Bombardier John Deere KN-556, 420956741, 711956741 Is it ok you think
Great Video . Thank you.
Thanks
Can I suggest using rubber gloves....if you don't have a latex allergy?
Safety is key, thank you for looking out for me :)
Does the engine oil go Tot he transmission as well or does transmission have a separate drain and fill spot?
The same oil lubricates both engine and transmission
@@PovertyPointCustoms thank you
Look in your owners manual.
Recommends 10w40 all year.
Page 96 owners manual DO NOT USE FULL SYNTHETIC OR BLEND. OTHER THAN BOMBARDIER BRAND.
We used the 0w40 as it is used to plow when it's-20 here
I was so worried you were going to burn yourself on that hot oil....
It was very hot!
PovertyPointCustoms like you!
And can 1 send you a picture of my motor
Sure, you can send it to my Instagram povertypointcustoms in a DM message