This is the biggest FLAW on these Suzuki Quad's!!!
Вставка
- Опубліковано 8 лют 2025
- In this video we will be going over and replacing a common issue part on these Suzuki eiger 400 Quad’s.
If you like the content please support the channel by liking and commenting on the videos. Thanks!
Milwaukee screw Driver set
amzn.to/4cwk7zr
Milwaukee M18 3/8" impact i use all the time.
amzn.to/4bXTSBw
Milwaukee 1/2" impact for getting the stubborn bolts out.
amzn.to/3IvcF9X
Tripod used for filming
amzn.to/49HAS90
Battery Jump Pack i use.
amzn.to/3tQOvTm
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you.
For business inquires please email Rock Ovitt
R.ovitt@outlook.com
#atvrepair
#4wheeling
#rockspowersports
Love the suzuki content! Recently picked up a KQ700 after owning Polaris for a few years, i'm much happier now!
Glad you’re happy with your recent purchase! I’ve had a couple Kingquad 700-750’s and they are nice wheelers!
When you tighten the bolts with the torque wrench, it would be amazing if you would tell us the nm values you do :) other than that, you explain everything very well. Thank you so much for these videos. I am currently binge watching all of them from the newest to oldest haha
I’ll keep that in mind for future videos. Thanks, I’m glad you’re enjoying them!
Vids are always good, we think we know who where watching, truth is no knows the truth, point is you seem like such a nice guy, keep up the good work.
I really enjoy your vids would love to watch you change the cvt belt on a Suzuki Vinson, you seem to be very knowledgeable about these things
They are pretty simple to do, I don’t have a Vinson here right now to make a video on.
I swear I’m always an hour late when you upload but non the less I’m here. Howdy duty from Indiana
I tried to get the video out earlier but it didn’t happen.
rock I thought you were going to be doing more drywall and changing the name to rocks atv and drywall repair!!!!lol.😂😂😂.great vid as per usual!!
No drywall haha, did enough of that when I remodeled my house..
@@rockspowersports lol,well i thought you missed doing it so you did your garage!!!lol
2005 arctic cat 400 and changed mine 4 years ago & put in same upgrade... NO PROBLEMS since!
The manual version is better for me.i like changing gears on smaller atvs
I have met Rock. Great guy. Just like the videos
Mine has non spark could the magnets be causing this?
2000 wasn’t the only year arctic cat used the eiger - my ‘07 400 had the same exact motor and had the same exact issue I ended up doing the upgrade
Yeah i meant to say 2000’s if I didn’t. I believe 2008 was around the last year of the eiger engine in the Cat’s.
Well worth doing. Especially as you found the problem with the sealer. 👍
Absolutely glad I opened that sump up and got all that junk out of there!
good work, just found your channel a couple weeks ago and subbed... Thanks
Great stuff as always!
Do you use the same type of Loctite on everything? What type are you using?
Thanks! I mainly use the blue loctite. Once in a while I’ll break out the red.
@@rockspowersports The blue one is not as aggressive as the red right? Do you have the numbers on it?
Thank you for sharing great video!!!👍👍👍
I had the same quad and it ran great but then out of knowhere it wouldn’t start up when hot and left me stranded few times . Turns out it was a fuel prob in the petcock witch was weird I guess that diaphram in there wouldn let the fuel flow
Yeah, there is a very fine mesh screen in the petcock.. clogged up pretty easily with dirt and debris.
I have a water problem with my eiger. It seems to get into the tank no matter what I do. But it burns off within a few minutes of running and works fine afterwards.
I also have a 2000 Suzuki King Quad 300 that the engine is locked up. Does the flywheel problem effect those models too? Would it be best to pull the side cover and check the fly wheel before checking the top end and the piston? Where would you look first?
Another great video Rock !! 😀👍
Thanks! Glad you enjoyed it.
I have one of these motors that dies after about 30 minutes of riding. Once it sits for a bit it will start again and run. I'm thinking its the fly wheel, but not sure. Is it a possibility?
Coil...
@@Yo-mamashouse i had replaced the coil already, I’m not the first owner of this atv, pulled the side off the motor found the flywheel was already upgraded, swapped the stator while I was in there, replaced the voltage regulator. Problems fixed… either that stator or voltage regulator.
Hi mate I have one of these and it misses and farts blows black smoke and back fires if ya hold it pined runs fine any idea mate cheers
Great video! Now get yours fixed up! Time for a rebuild video!
I should!
Can you confirm if this magnet issue applies to the old 1st gen Arctic Cat ATVs? I did some research, and I thought the older ones don't have the problem (this would be the pre-2000 bearcat 454, 400 and 500). But I never was able to find a 100% answer.
Do you ever work on Honda pioneers. Curious what sort of issues to watch out for on the 520 or 1000 models. Thank you
I haven’t had a Pioneer in the shop yet so I’m not too familiar with them.
@@rockspowersports I guess that’s A good sign, lol. Thank you for the great videos
That’s true, if I don’t see them in the shop they can’t be breaking to much!
Glad you enjoy the video’s.
I need advise
My 1999 kodiak 400 is backfiring through the carb and I’ve loosened intake valve and it’s still not starting. Would that be a bent valve or something else? Help would be appreciated.
Could be a few things. A very lean condition could cause backfiring through the carb. Have you clean the carb recently? Also check to make sure the runner boot in between the carb and engine is not cracked and sucking air.
It could also be a timing issue. Did you check your timing alignment to make sure it didn’t jump a tooth or so?
@@rockspowersports carb is clean and the intake boot is fine and engine is timed correctly
@@rockspowersports figured it out the flywheel key is sheered
Should have told the cop you got the new Bluetooth inspection sticker 😂
Yeah… not sure he would of found that too funny 😂
@rocks motosports. What size is that puller
Please and thank you
Great video 📹 👍
Thanks!
Another good show. And yes they are
Nice job
Ive got a 06 suzuki eiger 400 im looking to sell exact same as this one great quads
Great video, sir!
👍
Thank you so much
Привет, я из России у нас таких машин мало совсем, подскажи есть ли видео о регулировке клапанов?
No problem
Dump some oil in the filter gang baby 😎
Everytime!
Mine won't start from the starter...and it isn't the starter.
Arkansas Wavin
Fuel shutoff goes bad on these and can be replaced with a yamaha part that's much better.
Has anyone bought a machine from this guy
Yeah the biggest flaw is that it's a fucking Suzuki