Make Concrete Vessels With Me

Поділитися
Вставка
  • Опубліковано 3 лют 2025

КОМЕНТАРІ • 75

  • @TraceyFougere
    @TraceyFougere Рік тому

    Hi from Canada. I am also a Tracey. I make vessels... and I love your channel. 💙💜❤🥰

  • @bbnatural8688
    @bbnatural8688 3 роки тому +4

    Hi, just discovered you via a FB group post. Love your work. Thanks for taking the time to share your expertise. I've subscribed & am looking forward to going through older vids & new -Dey

  • @kelliemorris8989
    @kelliemorris8989 Місяць тому

    Thank you for the video. Where do you get your molds?

  • @MuhammadUsman-wv3es
    @MuhammadUsman-wv3es Рік тому

    Hello , How much time we have to leave the jars in the water for curing ?

  • @cinda7234
    @cinda7234 7 місяців тому

    Very cool, but I can't believe you don't wear gloves! Thank you for sharing.

  • @sonicpickups
    @sonicpickups 2 роки тому +7

    If you spray a fine mist of 91-99% alcohol on any bubbles while the stone is wet, they will pop all at once and give you a very clean casting.

  • @bydanimatos
    @bydanimatos Рік тому

    Where can I find the silicone bowl and the silicone molds do buy?

  • @sherrykirakosian3300
    @sherrykirakosian3300 2 роки тому +1

    Thank you for sharing. Can you please list the products you use

  • @barbramsden8663
    @barbramsden8663 2 роки тому

    Your videos are great, thank you for sharing! Are you working in your kitchen?

  • @ben_shey
    @ben_shey 2 роки тому +2

    can you share a link to your silicone bowl?

  • @forgeturazz
    @forgeturazz 2 роки тому

    How to you make a turquoise color ? I really like your candles.

  • @orlandopineda9711
    @orlandopineda9711 2 роки тому

    hola soy Orlando de El salvador Centro América estoy Súper contento con haber encontrado una maestra en el arte de velas y mas, tengo una consulta yo e hecho Velas en cemento barro o madera con parafina 58/60 y el cemento, barro o madera les absorbe el aroma y al quemarse no se siente que pasara, algún consejo

    • @alvaromartinez8431
      @alvaromartinez8431 2 роки тому

      Hola Orlando yo soy de colombia, al inicio a mi me pasaba igual y lo que debes hacer es impermeabilizar el concreto, en colombia uso él sika látex lo adiciono al agua con el que preparo el concreto, el problema que yo tengo es que se me fracturan los contenedores después de encender la vela a las 8 o 10 horas de uso, si a ti no te pasa esto y me puedes recomendar algo te lo agradecería

  • @grisselgomez6163
    @grisselgomez6163 2 роки тому

    Hello, I loved the vídeo, where can I buy the silicona molds? Greetings from Perú
    Thanks you

  • @bydanimatos
    @bydanimatos Рік тому

    Why destile water?

  • @Alienonmars
    @Alienonmars 2 роки тому

    Love the video, what size wooden wicks are you using for that vessel ?

  • @bydanimatos
    @bydanimatos Рік тому

    Why titanium monoxide ?

  • @sarahmartin3590
    @sarahmartin3590 3 роки тому +2

    Hello,
    I haven’t heard of the water bath, can you share the purpose is this something I should do? I’m brand new to making vessels and candles .
    I love your work I especially loved the lavender ones, thank you for sharing !
    Thank you !

    • @brewmillcandlecompany
      @brewmillcandlecompany  3 роки тому +8

      Hi there. I have a video about it in my collection, but basically I waterbathe all my vessels right out if the mold. This slows down the curing process to achieve maximum strength. Cementall cures HOT, and since we’re putting candle in it they burn HOT. Grout and mortar mixes tend to dry and crack under extreme heat when a vessel cures too fast. As I live in a dry climate I waterbathe for 24-48 hours, then allow dry cure for 7-14 days before sealing it. I want all the water that’s going to evaporate to be gone before I seal it, but I don’t want it to leave too fast.

    • @sarahmartin3590
      @sarahmartin3590 3 роки тому

      @@brewmillcandlecompany thank you so much ! I appreciate such a thorough response ! You’re very talented & I am learning a lot from these videos ! Thank you kindly for responding !

    • @brewmillcandlecompany
      @brewmillcandlecompany  3 роки тому

      @@sarahmartin3590 You are welcome. I hope you enjoy every minute of your journey 😊

  • @Junglesmurf2
    @Junglesmurf2 3 роки тому

    Thank you 😊 👍🏻

  • @shantelhlf
    @shantelhlf 2 роки тому

    Hi do you have the link for the silicone bowl ? Thanks

  • @ServeElohim
    @ServeElohim 2 роки тому

    Thanks for the video! What size label do you use for the 3” tulip?

  • @vanessadavila8108
    @vanessadavila8108 2 роки тому

    Ty for your video it's so helpful. Quick question did you say bathe the finished cement vessel?

    • @brewmillcandlecompany
      @brewmillcandlecompany  2 роки тому +1

      Yes Ma’am 😊 Always.

    • @vanessadavila8108
      @vanessadavila8108 2 роки тому +1

      @@brewmillcandlecompany Great thank you so much for taking the time to answer me!! Have a great day!!!

  • @theodoraberard5625
    @theodoraberard5625 3 роки тому

    Thanks for this helpful tutorial! Great video instruction.

  • @jacquiericard5190
    @jacquiericard5190 2 роки тому

    I am still very new at using concrete. What is the purpose of a water bath when you finish cooking?

    • @brewmillcandlecompany
      @brewmillcandlecompany  2 роки тому

      I use Cementall. Cementall is a hydraulic cement. Hydraulic cement requires water to cure. Hydraulic cement hardens when there is a chemical reaction between anhydrous cement powder with water. Non Hydraulic cement does not require water to cure, it hardens when there is a reaction due to carbonation with the carbon dioxide which is naturally present in air. So if you're using Cementall, you need to cure it in water to start. I do 24 hours then over the next 7 days the rest of the water not used up dissipates until it is a solid vessel I can seal.

  • @tanianorris573
    @tanianorris573 2 роки тому

    Thanks for sharing.. can you share the link for your Mold ?

    • @brewmillcandlecompany
      @brewmillcandlecompany  2 роки тому

      Hi, thank you for watching. I sure can. moderncraftlabs.com/collections/candle-jar-silicone-molds/products/3-tulip-silicone-planter-mold

  • @loriring8448
    @loriring8448 2 роки тому +3

    Hi there, thank you for this tutorial. I have a few questions that were not clear. You mentioned putting the concrete vessels into a water bath to “cure”. Is this necessary and why does it need to cure? Also, do you use a sealant inside these, prior to putting wax in them to make your candles? If so, what sealant do you prefer? Thanks again!

    • @brewmillcandlecompany
      @brewmillcandlecompany  2 роки тому +1

      I waterbathe to slow the curing process. I seal both in and out with Rutlands. I have a video on that process.

    • @Aaron84danielle
      @Aaron84danielle 2 роки тому

      @@brewmillcandlecompany why do you need to slow down the curing process? I'm learning and have never seen this done before so I'm curious about it.

    • @brewmillcandlecompany
      @brewmillcandlecompany  2 роки тому +4

      @@Aaron84danielle because Cementall is a hydraulic cement which hardens when there is a chemical reaction between anhydrous cement powder with water and will crack if it dries too fast.

  • @annamariekassab18
    @annamariekassab18 2 роки тому

    Hi they are Beautiful, after you make the concrete pots, do you have to put them in a water bath ? 😊

    • @brewmillcandlecompany
      @brewmillcandlecompany  2 роки тому +2

      Hi there, I use Cementall, and no they do not “have to” be waterbathed. But since the manufacturer states this product is “not recommended for high heat applications over 300F (149C)”, and we all know a flame from a candle can produce temps of 1830 F (1000 C), it is HIGHLY recommended to extend the manufacturers suggestion for water application during curing for optimum strength. Remember, this product was not designed for candles, so the recommended application process shouldn’t be taken verbatim. However, water curing IS recommended by manufacturer. I don’t skip this step. I’m not in a hurry and I like my vessels super durable so they can withstand not only the full use of the candle but I offer a refill program that many of my customers take advantage of, allows multiple uses out of each vessel without cracking from the heat exposure. So it’s up to you if you do it, you don’t “have to”.

  • @cathy175
    @cathy175 3 роки тому +1

    Hello, you concrete and wood containers are superb! I can afford to ask you or have you buy your mold with lid for concrete and your beautiful wooden boat for candles please! thank you:)

  • @rhondadelaney9390
    @rhondadelaney9390 3 роки тому

    I love your vessels, thank you for sharing!!! I have seen concrete vessels that have a chalk or whitish look, do you know how to accomplish that look?

    • @brewmillcandlecompany
      @brewmillcandlecompany  3 роки тому +1

      I make lighter vessels with Titanium Dioxide, I believe you can accomplish a chalky look by allowing to dry without washing off “slippery” layer after the water bath but I can’t be certain.

  • @yelena7147
    @yelena7147 2 роки тому

    Hi! Thanks for the video! May I ask is necessary to put vessels in water to cure them and what is the difference if not to put them?

    • @brewmillcandlecompany
      @brewmillcandlecompany  2 роки тому

      Hi. You’re welcome 😊 I’ve responded in the comments below. I do believe it’s necessary.

  • @anelrios9350
    @anelrios9350 Рік тому

    Hi ❤ thanks for the video ✨
    Can I ask how do you make your pink vessels much lighter? Do you just use more titanium dioxide?

  • @franziskajosteit7784
    @franziskajosteit7784 2 роки тому

    Hello, may i ask which coating you are using (non-toxix, heat-resistent, wax resistant etc.)? Many thanks

  • @DaddyTalkz
    @DaddyTalkz 2 роки тому

    Can you give me information to buy flexible frames?

  • @alvaromartinez8431
    @alvaromartinez8431 2 роки тому

    Hello, how do I ensure that the containers in particular do not break when the candle is lit? 😢 everything goes well at the beginning but after eight hours of use they break

    • @brewmillcandlecompany
      @brewmillcandlecompany  2 роки тому

      Oh no. I can’t answer to that. I’m sorry. We’re they too dry? Did you waterbathe them?

  • @nadenehorry9071
    @nadenehorry9071 3 роки тому

    Beautiful. Are your jars the 3” tall jars?

  • @cathygilani4663
    @cathygilani4663 3 роки тому +1

    Hello - do you water cure your vessels immediately after unmolding them?

  • @jasonbills7368
    @jasonbills7368 2 роки тому

    Hello hope you are doing great! I was wondering do you use a special ink to stamp the concrete and do you seal them first? I’m having trouble with regular ink just smearing 😦

    • @brewmillcandlecompany
      @brewmillcandlecompany  2 роки тому +1

      Hi there, I seal my vessels first, I found the ink bled too much. I use Permanent Ink. You can find that on Amazon or at Michaels.

    • @jasonbills7368
      @jasonbills7368 2 роки тому

      @@brewmillcandlecompany thank you so much! 😊

  • @tanyaallen5767
    @tanyaallen5767 3 роки тому

    Where did you get you company name stamp from? Also, when do you apply your stamp to the outside of the vessel?

    • @brewmillcandlecompany
      @brewmillcandlecompany  3 роки тому

      I get my stamps from Zazzle and I stamp AFTER I seal it and it completely dries for seven days.

  • @danielleturner3156
    @danielleturner3156 2 роки тому

    Hi how did you apply your name to the vessels? Is it a stamp?

  • @cathygilani4663
    @cathygilani4663 3 роки тому

    Oops - I see you explained this already -thank you!!

  • @shaneallwood8904
    @shaneallwood8904 2 роки тому

    Anyone seen the part two yet? 😊

  • @aksdezign
    @aksdezign 2 роки тому

    You do realize, cement dust is extremely toxic for lungs, right? Prolonged exposure to silica dust can cause irreparable damage to lungs. I'd suggest either wet sanding or using a spare room with no access to kids and always wear an industrial mask while doing so.

    • @brewmillcandlecompany
      @brewmillcandlecompany  2 роки тому +2

      I always wear a mask and we have a dedicated concrete making room with air quality control. Thank you for your comment 😊