Use code 731WOODWORKS50 to get 50% off your first Factor box at bit.ly/445iJ24 ▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next = Best Stop Block System EVER for Miter Saws - ua-cam.com/video/FXXIV2o5wrw/v-deo.html Tools in this Video: Reekon M1 Caliber Measuring Tool - amzn.to/43q3iQM DeWALT DWS779 Miter Saw - amzn.to/3rwb3aH Festool Kapex Miter Saw - amzn.to/3JX3pMO StealthStop Stop Block System amzn.to/3NPdlsZ Tool Wall over Miter Station - amzn.to/3ZgWq7B Dust Extractor for Miter Saw - amzn.to/41l6RYA Eneloop Pro Rechargeable Batteries - amzn.to/3OfSYqh Tool Deals - www.731woodworks.com/tool-deals 📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 (731) 207-7151 Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text! My Favorite Work Clothes - truewerk.pxf.io/GmbJjE Use code WOODWORKS10 to save 10% off your order for a LIMITED TIME ONLY. The full list of tools and supplies I recommend can be found on my website: www.731woodworks.com/recommended-tools 🇺🇸 Join the TUBAFOUR NATION through Patreon to get access to exclusive member only behind the scenes videos, member only livestreams, exclusive discounts, and other cool member only perks! www.patreon.com/731woodworks Check this video's description for all the links to any tools and videos I discussed. If you use one of these Amazon and other affiliate links, I may receive a commission. Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter to get new content alerts, sales, and more! mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Easy to Follow Build Plans - www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
Seen your content and you got a cool voice and pretty good style and seem to have a firm grasp on the trade. But I still didn't sub..... That is until you smooth played the sub my channel pitch about halfway thru this one. Maaaaan I been sub pitched by hundreds, maybe thousands of creators but that one was so typical but delivered like a pro and you had a friendly smile on. I aint no big time youtube guy and I have no clout and I'm more than likely to tear some idjit a new one in the comments and raise everybody's pulse an have fun doing it. But your cool and I belong to you now, just consider me like an old black and decker plug in drill. Im loud, im old, im just as likely to sprain your wrist as I am to push a dull drill bit thru a diamond and that's why you keep me around. Tuff and loyal and durable 🤜🏻🤛🏻
I love mine. I found it to be superior to my stop blocks because I can do several different measurements where as stop blocks would require me to reset them to different lengths. I think I commented about this thing on an old video of yours years ago. I bought mine when it was a Kickstart project.
Nice review! I didn’t consider the issue with a grippy wheel and knots impacting measurements and it’s nice to see that the M1 supports angled cuts! I think the M1 can be used in conjunction with a stop block pretty nicely to address the speed issue. Get an accurate measurement with the M1, move the stop block into position, move the M1 arm out of the way, cut, repeat, profit!
This would be most handy when cutting from a cut list. For most projects, I measure then cut one board at a time. The only time I cut multiples is for identical parts, which stop blocks work fine. But if you had a list of a bunch of cuts of different lengths, this would make very short work of it. I could see this used in a semi-production type of shop.
When this was first being advertised as a kickstart project, it was being sold as having BT connectivity and an ap that would let one person be measuring/nailing, and another cut man on the ground. As a framer/builder/GC, I can definitely see that as being a major pro for this device, and cutting down on time and poor communications.
@@orangeduc3129 As far as I know it is, he just didn't use it in the video. You may want to check the manufacturer's website for a full list of currently available features.
I bought one of these over a year ago. Used it twice and took it off of my saw. It sits on a shelf as a reminder of money wasted that could have gone to something more useful
Something I didn’t catch on this until watching your video: the REEKON calibrates to the tape measure you use to mark the initial 6’. This brings to point the importance of using the same measuring tape for the entire project for accuracy.
I received one of these as a gift. It was neat to have but definitely not necessary. My biggest issue was that after a month or two the wheel arm would no longer stay retracted in the up position.
I spent hours considering whether to purchase this thing during the sale. Watched several videos until I finally found someone make an actual miter cut which, in my opinion, is where precision matters most. In the end, I couldn't find a review good enough to convince me to make the purchase. This video would have made the difference. I am one of those folks with the rolling cart so this tool would be of benefit but, my plan is to eventually set up to use stop blocks. Time will tell which comes first; stop blocks or the Reekon going on sale again that will determine whether I buy one or not. Thanks, Matt, for another great video.
Thank you for reviewing this tool, Matt! I sometimes become enamored with a cool concept and want so bad, just to find the obsession was mightier than the actual usefulness of the tool. Like when I had to have the hedgehog guide. I mean, it's useful, but I don't use it as much as I thought I would. I looked at this gadget a bunch of times.
Nice review! I was relly thinking of getting this until you came up with the cons, which are big for my dusty shop and wonky boards. Going to your stop block vid next.
Hi there, you were talking about that Styrofoam case that this came in. Well, I bought one of these a year ago, and I sprayed mine with the bedliner spray, and it came out really nice. I put a cheap locking mechanism and a carrying handle on it. When it's not on the shopsaw it will keep it secure and looking nice. I just wanted to let you know. Have a wonderful day, and we love your content. Keep it up; I appreciate it!
Seemed like it would be a great tool. Thank you for the review. My experience was not so good. My installation required the adapter fence. ( Not Available 07-16-2023). Tried to make my own., I gave up and I am in the process of returning the thing. I so wanted it to work. Beware if you need the adapter fence you may be disappointed.
It looks like it could be a nice addition to a shop. In particular, it would make setting up stop blocks for repetitive cuts quicker and more accurate. Instead of running a board through the device 10 times, stopping at a reading of 5.25" to make a cut, to make 10 pieces 5.25" long; you could just use the device to measure 5.25", set the stop block to the end of the board, and make 10 cuts.
@@Surmoka Not really. This tool allows you to precisely measure, and hold, the length of cut while leaving both hands free to clamp the stop block in place. Can you do it with just a tape measure? Of course! We've been doing that for decades. The point is that this tool makes the process quicker, easier, and more precise.
@@Surmoka That's easier said than done. What he has in the video is NOT just a tape measure stuck to a table. And while you can certainly do that, actually doing it in a way that correct and accurate is going to be a fussy process. And doing what he has in the video is a lot more work and money. That doesn't mean it might not be worth the effort, but I don't think that's a valid "just do this instead" compared to a device that clamps on, has built-in calibration, then just works.
Need 6' on both sides of mitre saw station to calibrate. My workshop only has 60" on either side of saw blade. I took mine back to Lowe's when I found out. They have a T1 Tomahawk tape measure that's still in prototype that will be released soon.
Have you tried cutting 4 pieces with 45° miters on each end to see if they would fit together perfectly for a frame? I was waiting for that to happen when you were cutting those 45's. Also, many thanks for purchasing and trying out this tool for the rest of us. 👍 Cheers!
This! Really wanted to see this. The miter on trim pieces with uneven surfaces are difficult to measure with a measuring tape, this should solve this issue nicely.
Thank you for going through the calibration and the issues you had, my experience was similar! I was to the point I was about to throw it in trash before I stumbled into the solution!
Great Video Matt - I did a similar video a few weeks ago and you covered a lot of things I wish I would have addressed, such as the wheel collecting dust, knots in the wood and the ability to do miters using the miter feature. Great work! :)
Thank you the clarification I purchased one during prime days and yes I missed something lol prime days it was $119.00 great tool to have when doing cutting boards thank you for the content
Nice digital yard stick , but for $150.00 I will keep using the stop blocks . Great video ,full of info . Cheers btw…. AA’batteries are about 20 cents ea if bought in a lot of 100 . We snag the 100 box for the Christmas lights etc from the big A .
Actually I thought about buying one but I've heard about the cons from another reviewer. Dust on a miter saw is just normal even with dust collection running. So the fact that you would have to clean your board everytime you go to make a cut is to time consuming. I'm with everyone else here. My repeatable stop block system from Kreg is working good on my setup
I have been thinking about getting the M1 but I havent yet. You should do a video of their T1 tape measure. I just got mine in the mail 2 weeks ago and I love it.
@731Woodworks. I like todays video, found it to be very informative. thats said I have a random follow up question, as I couldn't stop looking at your holder for your chisels, I don't remember you having that when you installed those organizer panels and wanted to ask where you got it. I would be great for my shop as I don't yet have a solution, and desperately need one. Hope you see this and thanks!
Iv been on the fence about this ever since it launched on Kickstarter. I almost backed it then, and iv almost bought it many times since then My concern was accuracy, that has been addressed and I will be making the purchase
if I remember correctly, it pairs with their tape measure the tape is party f-ing cool, you can take maltabel measurements save them on the tape go to the saw down load those measurements to that tool and it gives you basically a cut list.
Interesting product and idea. The price is the barrier to entry for me. A well placed stop block or better yet flip stop, imo, would be as fast or faster. Thanks for sharing. Keep buying these gadgets and sharing.
It would be good info to tell us how short a cut it can measure for each saw. i.e. - how close can it be mounted to the blade for each of the miter saws you have. If I could measure a 1" piece on my DeWalt, that would be good to know. Don't know that I'd ever _need_ something that short, but it would be handy info to have out there.
My builder bought me one these for my job site saw. It works very well and was impressed with its accuracy. But having to cut long thin base boards, bulky long shelf boards , 45's on everything was not practical for this device. It was much more easy just to use the tape measure. Running long pieces and trying to hold them accurately took more time.
Thanks for the video. Once this is calibrated, does one have to recalibrate it? Say it gets turned off and not being used for awhile, will it need to be recalibarated?
Regarding the lack of batteries, I'm wondering if that might be something to do with less complications with shipping regulations. In the UK, if something has batteries, there's a lot of extra paperwork and red tape to ship it.
Limited space for a stop-block system is the only reason I could see for buying it. I like the idea, and I wouldn't be surprised if, in the future, something like that might end up in a high-end miter saw.
Trooper Matt, thank you again for your diligence and your thorough review. I wholeheartedly agree with me. If you are at that price point to come with batteries and a nice solid pink, at least a professional looking case I’m not going to the supermarket to get a Styrofoam cooler. why would I want one for my tool‼️ God Bless Y🫵🏻U & Miss Amy‼️🫶🏻🫶🏻🫶🏻✝️✝️✝️
I'd have to put mine on the right and do the calibration in reverse direction. I then wouldn't be able to use the bevel function of my saw as I would have to slide out the fence on the saw which would throw off the calibration.
What this tool will help with is the section of saw where I don't have any measuring tape. Between 12" and 20" I couldn't install any tape. I built my own station and should have removed the metal tubular extensions on the saw on both sides before bulding the center table.
I like the concept of this although you are right the price kills it for most people. A think I'd have to agree well set stop system gonna be cheaper and imo more accurate and prob last longer 🏴👍
I think carpenters who do residential trim carpentry would be the perfect application for this tool. You could go pull your measurements for the entire house for baseboards and door casings and make all your cuts wayyyyyy faster than measuring every single piece with the tape measure. And especially since most trim carpenters work with primed MDF and sanded poplar, the wheel would stay clean and accurate
Side note: I’ve seen adds for a tape measure that they’re developing where you can measure and save your measurement in a cut list on the digital display on the tape measure. I think if you used that in tandem with this product, you could trim out a house significantly faster than the traditional way where you write your cut list on a scrap piece
trim carpenters already do that without the use of this tool. I already walk around with a standard tape, laser tape, and angle finder for every mitered corner and measure the whole house before I start cutting. This wouldn't save any time at all really.
I think they have a tape measure that connects to it. If you’re doing something like baseboards you can record all your measurements, digitally, right on the tape measure. Then you can make the cuts all at once.
Another great review. The other drawback vs stop block is you have to roll the board under the wheel every time. So, if you need 10 boards 93" long, as when framing a wall. you have to roll each one under the wheel. No thanks. I agree about it being great for short boards.
I own one and I like it , almost a year and still accurate, you can use it in reverse as well and I use it on my mft3 for the panels of my kitchens , overall it's a nice accessory, is it necessity? I will say no but it's nice to have , I am waiting for their measuring tape , overall I like the product
I think I remember seeing a BT connected tape that works with this? So if you measure something, the cutman gets the dimentions automatically. I'm pretty sure it was this unit.
I could consider adding this to my shop... if you don't give it away AND you're still using it a good amount of time six months from now. Any chance you can give us an update video some time down the road like you have with the Festool dust extractor (if memory serves)?
I just got one, myself. I haven't used it yet, but my thought on the long pieces is this thing will help you with a setup board. Then use the setup board to bring a stop block in and lock it down.
Measuring and cutting can take the longest if you dont have a method to make it faster. Stop blocks are the way to go because you measure once set the block and your on your way. But still liked the video thumbs 👍 just because sometimes i impulse buy off of amazon 😆 have a great day
@@justjay3750 Dunno... I have some Woodpeckers knockoffs from Ali Express that are alright, but I don't know if that's generalizable to Temu or of Chinese tools generally.
When this was on Kick Starter, it was supposed to be equipped with a BT connectivity and an ap, so that I could be on the roof and I could send the cuts to the cut man on the ground. Is it equipped as described?
What would that matter? The measurement is taken by the rotation of the wheel. Shouldn't matter where the wheel is in relation to the board, as long as it rotates when the board is advanced
@tshirtfactory07 then why calibrate it If it runs off the wheels rotation. As the wheel goes up it changes it's location. The wheel isn't going straight up.
Does it have an external power option? As something that would, in many cases, just sit with the saw at all times it seems really stupid to need AA batteries at all. That's a good option for those that need it portable, but I would like to see a DC in jack on there that would allow you to just skip the batteries. That being said, it would probably not be hard to 3D a dummy "battery" pack that replaces the door and batteries, and you just need to wire it up to a 3v power supply.
Sounds interesting to me. However I think once the novelty of using it and having to set it up it would end up in my "Tools I didn't really need drawer.
Was curious when you measure with a tape, you push it flush so the end of the tape goes in but you don’t have that extra length from the tape. And didn’t you suggest we buy it on prime day?
Question!!???.....If you take it off and on your miter saw, would it be wise to maybe "mark" the position so you wouldn't have to calibrate it every time....or would you have to calibrate it every time you did remove it???
I think unless you could get it back at the exact same spot, you'd have to re calibrate each time. Good thing is it only takes about 30-45 seconds or so to calibrate it.
@@731Woodworks then that wouldn't be so bad at all. I could see this being extremely handy on the job site!! I install a lot of hard wood flooring, wood siding, wood trim, and decorative wooden crown molding.
As an amazon seller I can tell you that Amazon puts some pretty ridiculous restrictions on products being sold that include batteries, it's a huge hassle, i'm not at all surprised it didn't come with them
I am thinking about buying one but according to the compatibility of my miter saw, the BoschGCM12SD I would need to buy an adapter but the pictures clearly show the BoschGCM12SD with no adapter as far as I can see so I’m a tad confused and I did not see a way to contact the company the email they give I can’t get it to send any help would be helpful thank s
I am so glad you reviewedthis. I’ve eyeballed it so many times. I’m not trying to be funny but do you keep the dewalt around for sentimental reasons? I was blessed with some tools from a mentor of mine so I try to do the same. But some tools I just can’t seem to give away. I have a Camvac and a ct26 but still can’t get rid of the craftsman shop vac my mom got for me when I started with refinishing. That blossomed into me giving woodworking a try
Use code 731WOODWORKS50 to get 50% off your first Factor box at bit.ly/445iJ24
▼EXPAND FOR TOOL LINKS and INFO▼
Watch Next = Best Stop Block System EVER for Miter Saws - ua-cam.com/video/FXXIV2o5wrw/v-deo.html
Tools in this Video:
Reekon M1 Caliber Measuring Tool - amzn.to/43q3iQM
DeWALT DWS779 Miter Saw - amzn.to/3rwb3aH
Festool Kapex Miter Saw - amzn.to/3JX3pMO
StealthStop Stop Block System amzn.to/3NPdlsZ
Tool Wall over Miter Station - amzn.to/3ZgWq7B
Dust Extractor for Miter Saw - amzn.to/41l6RYA
Eneloop Pro Rechargeable Batteries - amzn.to/3OfSYqh
Tool Deals - www.731woodworks.com/tool-deals
📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 (731) 207-7151 Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text!
My Favorite Work Clothes - truewerk.pxf.io/GmbJjE Use code WOODWORKS10 to save 10% off your order for a LIMITED TIME ONLY.
The full list of tools and supplies I recommend can be found on my website: www.731woodworks.com/recommended-tools
🇺🇸 Join the TUBAFOUR NATION through Patreon to get access to exclusive member only behind the scenes videos, member only livestreams, exclusive discounts, and other cool member only perks! www.patreon.com/731woodworks
Check this video's description for all the links to any tools and videos I discussed.
If you use one of these Amazon and other affiliate links, I may receive a commission.
Some other useful links:
Daily Tool Deals on my website: www.731woodworks.com/tool-deals
Subscribe to our email Newsletter to get new content alerts, sales, and more! mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter
Easy to Follow Build Plans - www.731woodworks.com/store
Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
Seen your content and you got a cool voice and pretty good style and seem to have a firm grasp on the trade. But I still didn't sub..... That is until you smooth played the sub my channel pitch about halfway thru this one. Maaaaan I been sub pitched by hundreds, maybe thousands of creators but that one was so typical but delivered like a pro and you had a friendly smile on. I aint no big time youtube guy and I have no clout and I'm more than likely to tear some idjit a new one in the comments and raise everybody's pulse an have fun doing it. But your cool and I belong to you now, just consider me like an old black and decker plug in drill. Im loud, im old, im just as likely to sprain your wrist as I am to push a dull drill bit thru a diamond and that's why you keep me around. Tuff and loyal and durable 🤜🏻🤛🏻
@@idahogreen2885 😂👊🏻
You are correct the average woodworker will not need this. Thank you for sharing. Everyone stay safe, happy and healthy. From Henrico County Virginia
Great video Matt and overview of the M1 Caliber - we will have to get you a T1 Tomahawk to try next!
Can't wait! Thanks.
I love mine. I found it to be superior to my stop blocks because I can do several different measurements where as stop blocks would require me to reset them to different lengths. I think I commented about this thing on an old video of yours years ago. I bought mine when it was a Kickstart project.
glad to hear it!
Still, reference is always more precise that measurement. But I get it would be great for rough cutting
You should test their measuring tape next
Nice review! I didn’t consider the issue with a grippy wheel and knots impacting measurements and it’s nice to see that the M1 supports angled cuts! I think the M1 can be used in conjunction with a stop block pretty nicely to address the speed issue. Get an accurate measurement with the M1, move the stop block into position, move the M1 arm out of the way, cut, repeat, profit!
Nice piece of kit, always keep the wheel clean, over time dust build up changes the diameter of the wheel if left to build up over time
This would be most handy when cutting from a cut list. For most projects, I measure then cut one board at a time. The only time I cut multiples is for identical parts, which stop blocks work fine.
But if you had a list of a bunch of cuts of different lengths, this would make very short work of it. I could see this used in a semi-production type of shop.
When this was first being advertised as a kickstart project, it was being sold as having BT connectivity and an ap that would let one person be measuring/nailing, and another cut man on the ground. As a framer/builder/GC, I can definitely see that as being a major pro for this device, and cutting down on time and poor communications.
@@jmackinjersey1is the function you talking about available please
@@orangeduc3129 As far as I know it is, he just didn't use it in the video. You may want to check the manufacturer's website for a full list of currently available features.
I bought one of these over a year ago. Used it twice and took it off of my saw. It sits on a shelf as a reminder of money wasted that could have gone to something more useful
I've had one since the Kickstart and I use it all the time. Never had a problem with it.
Same here. Bought it through their Kickstarter and have had good success with it.
Something I didn’t catch on this until watching your video: the REEKON calibrates to the tape measure you use to mark the initial 6’. This brings to point the importance of using the same measuring tape for the entire project for accuracy.
You should calibrate your tape measures by bending the hook in or out slightly, and then they will all match unless the scales are wrong
I have it and works very well and came with a booklet instructions which explains it very well
I received one of these as a gift. It was neat to have but definitely not necessary. My biggest issue was that after a month or two the wheel arm would no longer stay retracted in the up position.
I spent hours considering whether to purchase this thing during the sale. Watched several videos until I finally found someone make an actual miter cut which, in my opinion, is where precision matters most. In the end, I couldn't find a review good enough to convince me to make the purchase. This video would have made the difference. I am one of those folks with the rolling cart so this tool would be of benefit but, my plan is to eventually set up to use stop blocks. Time will tell which comes first; stop blocks or the Reekon going on sale again that will determine whether I buy one or not. Thanks, Matt, for another great video.
Thank you for reviewing this tool, Matt! I sometimes become enamored with a cool concept and want so bad, just to find the obsession was mightier than the actual usefulness of the tool. Like when I had to have the hedgehog guide. I mean, it's useful, but I don't use it as much as I thought I would. I looked at this gadget a bunch of times.
Nice review! I was relly thinking of getting this until you came up with the cons, which are big for my dusty shop and wonky boards.
Going to your stop block vid next.
Hi there, you were talking about that Styrofoam case that this came in. Well, I bought one of these a year ago, and I sprayed mine with the bedliner spray, and it came out really nice. I put a cheap locking mechanism and a carrying handle on it. When it's not on the shopsaw it will keep it secure and looking nice. I just wanted to let you know. Have a wonderful day, and we love your content. Keep it up; I appreciate it!
Seemed like it would be a great tool. Thank you for the review. My experience was not so good. My installation required the adapter fence. ( Not Available 07-16-2023). Tried to make my own., I gave up and I am in the process of returning the thing. I so wanted it to work. Beware if you need the adapter fence you may be disappointed.
It looks like it could be a nice addition to a shop. In particular, it would make setting up stop blocks for repetitive cuts quicker and more accurate. Instead of running a board through the device 10 times, stopping at a reading of 5.25" to make a cut, to make 10 pieces 5.25" long; you could just use the device to measure 5.25", set the stop block to the end of the board, and make 10 cuts.
You can use your measuring tape to set up the støp blok as well.
@@Surmoka Not really. This tool allows you to precisely measure, and hold, the length of cut while leaving both hands free to clamp the stop block in place. Can you do it with just a tape measure? Of course! We've been doing that for decades. The point is that this tool makes the process quicker, easier, and more precise.
@@DKWalser stick a tape measure on the holding surface like you see in the video, for $5, and you have your hands free to set the stop block.
@@Surmoka That's easier said than done. What he has in the video is NOT just a tape measure stuck to a table. And while you can certainly do that, actually doing it in a way that correct and accurate is going to be a fussy process. And doing what he has in the video is a lot more work and money. That doesn't mean it might not be worth the effort, but I don't think that's a valid "just do this instead" compared to a device that clamps on, has built-in calibration, then just works.
Need 6' on both sides of mitre saw station to calibrate. My workshop only has 60" on either side of saw blade. I took mine back to Lowe's when I found out. They have a T1 Tomahawk tape measure that's still in prototype that will be released soon.
Have you tried cutting 4 pieces with 45° miters on each end to see if they would fit together perfectly for a frame? I was waiting for that to happen when you were cutting those 45's.
Also, many thanks for purchasing and trying out this tool for the rest of us. 👍
Cheers!
This! Really wanted to see this. The miter on trim pieces with uneven surfaces are difficult to measure with a measuring tape, this should solve this issue nicely.
Thank you for going through the calibration and the issues you had, my experience was similar! I was to the point I was about to throw it in trash before I stumbled into the solution!
Thanks for taking the hit for us, very good info.
Great video and review Matt. Thanks.
Great video on the product!
Well done!
Glad you liked it!
Great video, thanks! I've thought about this tool but in the end, nah. Cool and useful and I do use my miter saw a lot but nah.
This really is a genius idea. They just need to make a few minor adjustments other than that it's pretty cool. God bless
Thanks for your review. I've been considering buying one. Very timely, again.
Glad I could help!
I've been curious about this...good review
Review their tape measure, Please! The M1 Tomahawk looks cool! I don't know if I should get it.
Great Video Matt - I did a similar video a few weeks ago and you covered a lot of things I wish I would have addressed, such as the wheel collecting dust, knots in the wood and the ability to do miters using the miter feature. Great work! :)
flynngoat in the 731 comments. what a legend.
@@moldyzucchinis3251 😂 Old Moldy! Still my favorite username! :)
Thank you the clarification I purchased one during prime days and yes I missed something lol prime days it was $119.00 great tool to have when doing cutting boards thank you for the content
Thanks much for the review.
VERY INFORMATIVE
Glad it was helpful!
Thanks again. The cons were really heavy, cleanliness plus straight perfect boards 😫.
Interesting item, not really something I would need, but I can see that it does have a place and would be useful.
Nice digital yard stick , but for $150.00 I will keep using the stop blocks . Great video ,full of info . Cheers btw…. AA’batteries are about 20 cents ea if bought in a lot of 100 . We snag the 100 box for the Christmas lights etc from the big A .
Sooo glad you spent your $, I'll save mine - I learnered how to read a scale/ruler way back in junior high school.
Actually I thought about buying one but I've heard about the cons from another reviewer. Dust on a miter saw is just normal even with dust collection running. So the fact that you would have to clean your board everytime you go to make a cut is to time consuming. I'm with everyone else here. My repeatable stop block system from Kreg is working good on my setup
I have been thinking about getting the M1 but I havent yet. You should do a video of their T1 tape measure. I just got mine in the mail 2 weeks ago and I love it.
@731Woodworks. I like todays video, found it to be very informative. thats said I have a random follow up question, as I couldn't stop looking at your holder for your chisels, I don't remember you having that when you installed those organizer panels and wanted to ask where you got it. I would be great for my shop as I don't yet have a solution, and desperately need one. Hope you see this and thanks!
It's just a magnetic pad that OmniWall sells on their website. omniwallusa.com/magnet-pad/
@@731Woodworks oh hell yeah!!! Thanks buddy, I’ll scoop one
Iv been on the fence about this ever since it launched on Kickstarter.
I almost backed it then, and iv almost bought it many times since then
My concern was accuracy, that has been addressed and I will be making the purchase
I saw the ads but didn't think it would be that good!
if I remember correctly, it pairs with their tape measure the tape is party f-ing cool, you can take maltabel measurements save them on the tape go to the saw down load those measurements to that tool and it gives you basically a cut list.
Interesting product and idea. The price is the barrier to entry for me. A well placed stop block or better yet flip stop, imo, would be as fast or faster. Thanks for sharing. Keep buying these gadgets and sharing.
It would be good info to tell us how short a cut it can measure for each saw. i.e. - how close can it be mounted to the blade for each of the miter saws you have. If I could measure a 1" piece on my DeWalt, that would be good to know. Don't know that I'd ever _need_ something that short, but it would be handy info to have out there.
For random pieces of different length ti could see using it. But for repetitive pieces at the same length a stop block would be faster.
Do you have link to your saw table building with the stop block measure please thanks
My builder bought me one these for my job site saw. It works very well and was impressed with its accuracy. But having to cut long thin base boards, bulky long shelf boards , 45's on everything was not practical for this device. It was much more easy just to use the tape measure. Running long pieces and trying to hold them accurately took more time.
Looks awesome, I should have bought it on prime day, guess I’ll wait till it goes on sale again.
Thanks for the video. Once this is calibrated, does one have to recalibrate it? Say it gets turned off and not being used for awhile, will it need to be recalibarated?
would love to see a video on your thoughts on their tape measure The T1. Thanks for the content keep up the good work :-)
Regarding the lack of batteries, I'm wondering if that might be something to do with less complications with shipping regulations. In the UK, if something has batteries, there's a lot of extra paperwork and red tape to ship it.
Even for alkaline batteries? Lithium makes sense, but this thing just uses AAs.
@@Lord_zeel
Ah, good point. I don't know actually.
Could you show a close up on how this attatches to saw
Limited space for a stop-block system is the only reason I could see for buying it. I like the idea, and I wouldn't be surprised if, in the future, something like that might end up in a high-end miter saw.
Trooper Matt, thank you again for your diligence and your thorough review. I wholeheartedly agree with me. If you are at that price point to come with batteries and a nice solid pink, at least a professional looking case I’m not going to the supermarket to get a Styrofoam cooler. why would I want one for my tool‼️
God Bless Y🫵🏻U & Miss Amy‼️🫶🏻🫶🏻🫶🏻✝️✝️✝️
I'd have to put mine on the right and do the calibration in reverse direction. I then wouldn't be able to use the bevel function of my saw as I would have to slide out the fence on the saw which would throw off the calibration.
How about a video on different moisture meters. All the videos I find are firewood related or just using 1 brand.
What this tool will help with is the section of saw where I don't have any measuring tape. Between 12" and 20" I couldn't install any tape. I built my own station and should have removed the metal tubular extensions on the saw on both sides before bulding the center table.
I like the concept of this although you are right the price kills it for most people. A think I'd have to agree well set stop system gonna be cheaper and imo more accurate and prob last longer 🏴👍
I think carpenters who do residential trim carpentry would be the perfect application for this tool. You could go pull your measurements for the entire house for baseboards and door casings and make all your cuts wayyyyyy faster than measuring every single piece with the tape measure. And especially since most trim carpenters work with primed MDF and sanded poplar, the wheel would stay clean and accurate
Side note: I’ve seen adds for a tape measure that they’re developing where you can measure and save your measurement in a cut list on the digital display on the tape measure. I think if you used that in tandem with this product, you could trim out a house significantly faster than the traditional way where you write your cut list on a scrap piece
trim carpenters already do that without the use of this tool.
I already walk around with a standard tape, laser tape, and angle finder for every mitered corner and measure the whole house before I start cutting. This wouldn't save any time at all really.
Interesting tool.
I think they have a tape measure that connects to it. If you’re doing something like baseboards you can record all your measurements, digitally, right on the tape measure. Then you can make the cuts all at once.
I generally use this to speed up rough cuts, and then refine if needed from there.
Another great review. The other drawback vs stop block is you have to roll the board under the wheel every time. So, if you need 10 boards 93" long, as when framing a wall. you have to roll each one under the wheel. No thanks. I agree about it being great for short boards.
How does it perform on PVC or dowels?
I bought one on their Kickstarter program for $99. I couldn't setup the calibration. Maybe I'll try again. Thanks for the video.
Got it for $119 during Prime Days deals. And I"m thinking you can move your saw fence out to give you some clearance for those miter cuts.
I own one and I like it , almost a year and still accurate, you can use it in reverse as well and I use it on my mft3 for the panels of my kitchens , overall it's a nice accessory, is it necessity? I will say no but it's nice to have , I am waiting for their measuring tape , overall I like the product
I hadn't thought of using it on other fences! That might be something I need to explore...
@johnstanley3253 just clamp a a wide taller angle to the mft3 table and clamp the m1 on to it and it works
I think I remember seeing a BT connected tape that works with this? So if you measure something, the cutman gets the dimentions automatically. I'm pretty sure it was this unit.
I could consider adding this to my shop... if you don't give it away AND you're still using it a good amount of time six months from now. Any chance you can give us an update video some time down the road like you have with the Festool dust extractor (if memory serves)?
Mr Matt,dose this work with the bevel cuts , I want to make some honey comb shelves for the Mrs.
How well does this work with your Ryobi Miter saw?
You should try the new T1 Tomohawk that will be available to pair with the M1. Could be a good video.
I just got one, myself. I haven't used it yet, but my thought on the long pieces is this thing will help you with a setup board. Then use the setup board to bring a stop block in and lock it down.
So....a 150 dollar fragile, electronic tape measure? Lol
That's the funniest thing I have heard. Tape measures, by design, are fragile.
@@Itsdirtnaptime You must be fun at parties if that's the funniest thing you've ever heard.
do you have to zero for different thicknesses. Can I cut 8/4 then 4/4 stock without zeroing? Another great video 🎉
Nice video Matt
Measuring and cutting can take the longest if you dont have a method to make it faster. Stop blocks are the way to go because you measure once set the block and your on your way. But still liked the video thumbs 👍 just because sometimes i impulse buy off of amazon 😆 have a great day
Thanks!
Does the calibration cut have to be 6’? Like many people, my miter saw station only has 5’ to the right of the saw.
Got one/Love it
Great breakdown and demo, as usual. Looks like a cool toy and I will definitely plan to buy the knockoff when it shows up on Temu for $42.
is temu stuff actually legit? I bought something from wish once and although it did show up the quality was horrendous.
@@justjay3750 Dunno... I have some Woodpeckers knockoffs from Ali Express that are alright, but I don't know if that's generalizable to Temu or of Chinese tools generally.
When this was on Kick Starter, it was supposed to be equipped with a BT connectivity and an ap, so that I could be on the roof and I could send the cuts to the cut man on the ground. Is it equipped as described?
Yes the app works
0.01in or 0.254mm isn't negligible. You can feel that difference. Can you try how accurate it can be in mm.
Butiful video sir
Does it have to be recalibrated if the board is thocker? Id think so as the wheel would move to a different point.
What would that matter? The measurement is taken by the rotation of the wheel. Shouldn't matter where the wheel is in relation to the board, as long as it rotates when the board is advanced
@tshirtfactory07 then why calibrate it If it runs off the wheels rotation. As the wheel goes up it changes it's location. The wheel isn't going straight up.
Saw a camera that matches the frame rates of screens thought that awesome
Does it have an external power option? As something that would, in many cases, just sit with the saw at all times it seems really stupid to need AA batteries at all. That's a good option for those that need it portable, but I would like to see a DC in jack on there that would allow you to just skip the batteries. That being said, it would probably not be hard to 3D a dummy "battery" pack that replaces the door and batteries, and you just need to wire it up to a 3v power supply.
Sounds interesting to me. However I think once the novelty of using it and having to set it up it would end up in my "Tools I didn't really need drawer.
Is there upgraded rechargeable usb c charger type please
Was curious when you measure with a tape, you push it flush so the end of the tape goes in but you don’t have that extra length from the tape. And didn’t you suggest we buy it on prime day?
I would love to see you actually build things. dont get me wrong I like product reviews but how about some wood working
Question!!???.....If you take it off and on your miter saw, would it be wise to maybe "mark" the position so you wouldn't have to calibrate it every time....or would you have to calibrate it every time you did remove it???
I think unless you could get it back at the exact same spot, you'd have to re calibrate each time. Good thing is it only takes about 30-45 seconds or so to calibrate it.
@@731Woodworks then that wouldn't be so bad at all.
I could see this being extremely handy on the job site!! I install a lot of hard wood flooring, wood siding, wood trim, and decorative wooden crown molding.
If you get the measuring tape it connects to it and it will have all your measurements programmed to it.
As an amazon seller I can tell you that Amazon puts some pretty ridiculous restrictions on products being sold that include batteries, it's a huge hassle, i'm not at all surprised it didn't come with them
Fair review, and a nice tool, but I can tell from the review that I don't really have a need for it. Thanks for saving me $150!
I'm having trouble locking mine down? It won't engage/lock down on the fence.
I am thinking about buying one but according to the compatibility of my miter saw, the BoschGCM12SD I would need to buy an adapter but the pictures clearly show the BoschGCM12SD with no adapter as far as I can see so I’m a tad confused and I did not see a way to contact the company the email they give I can’t get it to send any help would be helpful thank s
I am so glad you reviewedthis. I’ve eyeballed it so many times. I’m not trying to be funny but do you keep the dewalt around for sentimental reasons? I was blessed with some tools from a mentor of mine so I try to do the same. But some tools I just can’t seem to give away. I have a Camvac and a ct26 but still can’t get rid of the craftsman shop vac my mom got for me when I started with refinishing. That blossomed into me giving woodworking a try
Yes I do lol. It was my first major tool purchase. It's also a great saw. Can't get rid of it lol.
That's cool
I've seen this on other channels, but I've got a tape rule and set up stops if I'm making a lot of repeat cuts 🙄
Good video