7AFE iMS (intelligent Multiple Spark) 7AFE智慧多重火花系統。
Вставка
- Опубліковано 30 січ 2024
- This is a Corolla with 7AFE engine working on stock ECU.
7AFE intelligent multiplr sparks system.
This system takes the IGT and CYL(NE) signals from the dizzy.
It then reproduce 4 independent sequentially 4 IGT signals to the 4 COPs.
Number of sparks per ignition varies from revs.
DWELL also varies from 4.6ms to 5.9ms at all revs.
Timing is minor advanced in micro seconds(us).
這是一台7AFE的Corolla。 使用原廠電腦。
7AFE智慧多重點火、多重火花系統。
本系統使用分電盤內產生的IGT與CYL(NE)訊號。
重製出4個獨立依序的點火訊號,傳到4隻獨立點火考耳。
每次點火進程的多重點火次數會依轉速不同而改變。
充磁時間也會有變化,在4.6ms到5.9ms之間。
點火正時微微提前,只有數個微秒(us)範圍。 - Авто та транспорт
Gostei do conteúdo. Tenho um corolla 4A FE é gostaria de fazer algumas modificações no sistema...
where can such armored pipelines be ordered?
Hello, so it won't work on 4a fe? and why? Thank you
Where do I find a write up on doing this conversion or where do I buy the conversion kit at?
Hello, is this module supported on 7AFE that has two sensors on camshaft position sensor in distributor?
USDM model years 1993-1995 had two sensors of the camshaft position in the distributor, while 1996-1997 USDM models had one sensor on camshaft and one sensor on crank.
The one shown here seems to be the one that has one sensor on camshaft and one sensor on crank, based on other videos you posted, but I could be wrong on this assumption.
I wanted to know if its supported on the older models, thanks.
This 7AFE has only sensors in the dizzy, which include the home sensor required. While I have another version of dizzy do not. I was told that dizzy is for 4AFE Corolla.
Almost all old HONDA's dizzy provides the required home signal. While I found some of the Toyota's do not.
Some even provide two signals, such as 4AGZE and 4AGE-20V recently processed on two AE86. Those are called G1 and G2.
Not necessarily so called G signal workable, it's Toyota's definition. But in HONDA's system, the CYL signal is to work with.
I am not familiar with Toyota's system. I am not able to tell which models and years can work, but the inside photo of the dizzy can tell.
If the engine worth it, add a home sensor to work with is doable. I do that to a Pontiac Firebird V6 few years ago.
which brand coil is this ?
Aftermarket product no brand name made in Taiwan our factory.
want it for 4afe🤩
It won't work with the dizzy of 4A-FE.
According to the sensors inside the dizzy.
@@UWattTech :(((( i belive you come up with enything about it🤔.
Where can I buy this?
email me simon.uwatt@gmail.com
有在賣線組嗎?
改多重直接點火,需要控制器+線組
你會作控制器?
還是說你要只買控制器+線組,考耳省起來?
Hello , is it wasted spark? Or batch?
Sequentially independednt.
@@UWattTech how much for the Module?
where can i get in touch with you?
@@nissaarwz4645 email me simon.uwatt@gmail.com, thanks
@@UWattTech do check your inbox , thanks
@UWattTech check your mail please . Thank you
Где купить это всё
It's made in Taiwan. contact me simon.uwatt@gmail.com
У меня Карина е 1,6 1992 г
Интересно. Так то мягко работает и вибрации нет
As smooth as using original dizzy. With more torque output from engine.
И динамика сразу другая
Simon can you check your email please? thanks
Where can i buy this?
It can be shipped from Taiwan. contact me simon.uwatt@gmail.com
Kits for old HONDAs are also available.
@@UWattTech how much for a kit for toyota
Kiero serlo así en que aplicación compro el quit