Це відео не доступне.
Перепрошуємо.
Spyder Auto Installation: 1999-2006 GMC Sierra Headlight
Вставка
- Опубліковано 20 кві 2020
- Spyder Auto Installation Video:
Part#: PRO-YD-CDE00V2-LB-BK
SKU#: 5084521
OEM Headlight Lumen Test: 114
Spyder Headlight Lumen Test: 286
*This install apply's to all Headlight color variations for this model.*
Black Housing
LED Lightbar Headlights
This how-to tutorial guides you through the complete installation process from start to finish, and offers helpful tips throughout to facilitate a successful install.
My signal light got 3 wires which one is the positive and which one is negative
Awesome now I found the video I haven't been able to connect the LeD 🤦🏻♂️😅 you should put your UA-cam channel on the box or put a flyer with the product.
I bought these for my truck 2 years ago, and the projector went out already. Reason because of too much heat. Going back to stock ❤️
The light that came with it?
@@17slickace yeah didn't provide much info. I am wondering the same thing
@@mg90q61 i just bought some leds to replace them just have to adjust these suckers
That’s why I upgraded mine. I got LED’s from Amazon, they come with the in-line box needed for voltage as well and have fans on a heat sink on the back. Really well made. Glad I changed them
I purchased these to do a retrofit. These are Permasealed. I can’t remove the lens and I’m going insane! Already purchased hundreds of Morimoto upgrades. Thoughts? They used to make a Morimoto Sealant remover; not anymore. Do I have to use an ultrasonic cutter? Why not use Butyl?
I hooked mine to the turn signal and it looks cool when flashing
how did you do that I wanna do tht too mine sounds sick
@@bryantorres6237 you just tap the led strip into the turn signal wire
Did you wire it to both the park wire and the blinker wire? Or just the blinker wire? Im curious to know if it would still blink like that
@@marshall2368 how do you make the led strip light up
@@marshall2368 I need a little help
if you connect to the side marker wires, your turn signals don't work when the engine is running (work fine with the ignition on though). Not sure if that's the case here also ... can't tell if the truck is running or not.
There is a noticeable gap in between my lights and the grill... anyone else have this issue?
I didn’t have any gap that was so noticeable I returned it.. yeah there’s a gap but it’s honestly not much bigger than OEM
I cant get the holes on the light to align with the truck to get the pins in. And there is s gap between the light and grille.
I didn’t really have this issue. I would say the pins were harder to align than stock, but I’ve done it several times without problem now.
when I turn on my high beams my low beams turn off does anyone know why?
I cant get mine to lock in place the bottom one u did last
Does the box come with a spy deer decal?
The spyder lights appear to have an issue with hot spots
Do you guys sell anything like this but for 99-06 chevy tahoe?
They do, but since the chevy’s lights are much thinner I don’t know if it’s projector or not. I’m sure they do.
Where can I buy the chrome ones can’t find it
Idk what I did wrong but now my left blinker ticks fast when activated
what he doesn't tell you is that you need to replace the turn signal relay with an LED compatible one. they flash quickly because the current going through the wires is too low with the stock relay and the system thinks something is wrong.
Is the Led bar going to be running with day time running lights ?
It was on when they turned it on near the end of the video, should be self-explanatory from there.
@@CB-lh8gw i think he's asking can we run the light bar on the daytime running light wires instead of having it on the park lights ?
No because he didnt tap it into the drl’s. You can tap into both tho I’m sure and they will be on all the time.
@@marshall2368 I want to tap into and make them day time running lights, can I just tap the black into black and green into blue with my connectors
Wish they made them without the hideous led bar
Had these for 2 years already!! All of a sudden people want them.. 🤦🏽♂️
What wire size T-Tap connectors?? You failed to mention that in the beginning?
Hey did you find out? Im having trouble with that
16awg
I used 16-14 awg T-Taps from auto zone they’re like 5$ the parking light wires are 16 awg. The guy in this video failed to mention the wire size and the multi-meter is pretty much pointless!! The camera guy was standing to far back not close enough to the instructor both men could’ve done better job tbh ..the only wire you don’t tap is the blue wire
I wouldn’t use T-taps. They’re unreliable and allow for water intrusion. I cut the wires and just spliced the wires together with shrinking butt connectors. I know, more permanent, but it’s fixable if they end up breaking somehow. I left the stock bulb sockets.
Is this on Amazon do you have a link?
I got some aftermarket projector headlights for my 2001 suburban and the brights and projectors don’t line up. So my brights arent even pointed on the road and the projectors are. I wonder if the lights work good on these headlights? Someone please let me know
i have this same problem. did you ever figure it out?
@@jameskennedy5728 what lights do you have? and no i never messed with it. im probably going to get a new set of original lights
Hmm. Sounds like the mounting is all screwed up on there. Never had to mess with mine though so I don’t know if they have adjustability
Spyder needs to make a blinker assembly to match. Cant find a good look to go with the headlights. I guess ill go halos and leds
Look on Amazon. Just ordered running lights and turn signal leds for $80. Kinda expensive. Message me and I will let you know how they are
Nope best thing to do is go on ebay or amazon and get one that is black background and clear lens. Looks the best and is the cleanest. $30
@@roostmx I’ve seen the $30 ones. Unfortunately they’re garbage quality. When it comes to headlight housings you get what you pay for, they like to cheap out on the housing (I.e. low quality glue and sealants, and low quality plastic that will turn yellow really fast)
Blake Slocum mine were more than great so clear you can never tell theirs even a lense. I have a gmc sierra now that has that same bottom lense and spyder headlights
Installation of headlight switch
Link to these headlights?
Anybody know if these allow good ol Filament light bulbs? I don’t want them freezing over in the winter.
Just buy leds from amazon. Sealight for about $50 for high and low beams
They come installed with halogens in them. No worries there
@@blakeslocum2732 sweet, and do they have the adjustment screws? I cant see from the video.
@@Zulfburht they do have adjustment screws. The access to them is a pain in the butt though, so I just grabbed pliers and turned the screw shaft from the top. Worked perfectly fine!
Side note I wouldn’t recommend leaving halogens in there. Others have had problems with the projectors melting. Don’t know why. I put LED’s in mine that are high quality. Cost me more than $100 but they’ve been great thus far.
Also I wouldn’t worry about them freezing over. High-powered LEDs still put off a decent amount of heat (thus mine have a heat sink and fan on the bottom) and I literally drove through a snow “storm” yesterday and had no issues with any of it. 👍
I’ve had these for prolly 6 months or longer now
I'd like to know what those connecters are your mentioning.
T-Tap connectors. can get them at any autoparts store. they also come in kit.
@@Garret3579 I wouldn’t recommend t tap connectors. They’re unreliable and are not water tight. I used but connectors with glue and heat shrink built in. It’s more commitment but way higher quality. Since the original plugs are still in place it’s always reversible.
Where can I order these lights? Went on your website...
Right
why do my low beams stay on all the time
You definitely wired something up wrong..!
@@blakeslocum2732 i already got it right but thanks anyways 😂
How did you wire it so that only the line lights up when running ?
My low beams or high beams are always on , i cant get just the line ?
@@omarvaladez9492 these trucks have DRL’s, so when the truck is in drive, the DRLS will be on. There are a few sets of wires.
The high beams, low beams, parking lights(and/or turn signals) and DRL wires. You can look up wiring diagrams and this should help you out a ton.